Logik L05CBIG10 User manual
Instruction Manual
Corded Big Button
Telephone with
Speakerphone
L05CBIG10
Contents
Safety First .................................................................................................. 4
Unpacking................................................................................................... 6
Getting Started........................................................................................... 7
Locating the Base Unit ..............................................................................................7
Wall Mounting (optional)........................................................................... 8
Control Overview......................................................................................10
Operation ..................................................................................................12
To Make a call............................................................................................................. 12
To Answer a Call........................................................................................................ 12
To Adjust the Handset Volume............................................................................ 12
To Adjust the Speakerphone Volume ............................................................... 12
To End a Call............................................................................................................... 12
To Switch between the Handset and the Speakerphone.......................... 12
Last Number Redial ................................................................................................. 12
Mute Function in Handset mode........................................................................ 13
Mute Function in Speakerphone Mode........................................................... 13
Use on PBX.................................................................................................................. 13
Inserting a Pause in the Dialing Sequence ..................................................... 13
Storing a Number in (0-9) two-touch memories .......................................... 13
Dial out Stored number (0-9) two-touch memories.................................... 14
Helpful Information..................................................................................15
Specications............................................................................................15
4
Safety First
For your continued safety and to reduce the risk of injury or electric shock,
please follow all the safety precautions listed below.
• Read all instructions carefully before using the telephone and keep
them for future reference.
• Retain the manual. If you pass the telephone onto a third party, make
sure to include this manual.
• Follow all warnings and instructions marked on the telephone.
• Do not use the product near water for example near a bathtub, kitchen
sink, etc.
• Place the product securely on a stable surface. Serious damage and/or
injury may result if the product falls.
• Do not cover slots and openings on the telephone. They are provided
for ventilation and protection against overheating. Never place the
telephone near radiators, or in places with poor ventilation.
• Do not place objects on the telephone line cable. Install the phone
where no one can step or trip on the telephone line cable.
• To reduce the risk of injury or electric shock, do not disassemble the
telephone. Incorrect reassembly can cause electric shock when the
product is subsequently used.
• During thunderstorms, avoid using telephones except cordless types.
There may be a remote risk of an electric shock from lightning.
• Do not use the telephone to report a gas leak, when in the vicinity of
the leak.
• Young children should be supervised to ensure that they do not play
with the telephone.
• The telephone is not intended for use by persons (including children)
with reduced sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instructions
concerning the use of the telephone by a person responsible for their
safety.
5
CAUTION:
Installation
• Never install telephone wiring during a lightning storm.
• Never install a telephone wall socket in wet locations unless it is
specifically design for wet locations.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• The telephone is designed for use on vertical walls constructed of
solid brick, solid concrete, solid wood and solid wood columns. It is
the installers responsibility to verify that the wall structure/surface will
safely support the total load (combined weight of telephone base and
handset). If the installer has any uncertainties about the wall structure/
surface, they must contact a qualified installer.
• Do not use this product for any applications other than its intended
purpose.
• Do not over tighten the screws.
6
Thank youfor purchasing your new Logik
Corded Big Button Telephone with Speakerphone.
We recommend that you spend some time to read this Instruction
Manual in order to fully understand how to install and operate it.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose
of it please do so according to local regulations.
Handset Cord
Telephone Line
Cord
Handset
Instruction Manual
Main Unit
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0344 800 3456 for assistance.
Instruction
Manual
7
Getting Started
Locating the Base Unit
1. The base unit should be placed on a level surface, in a position where:
• The telephone line cord will reach your telephone line wall socket.
• It is not close to a sink, bath or shower, or anywhere else where it
might get wet.
• It is not close to other electrical equipment - fridges, washing
machines, microwave ovens, TVs, fluorescent lights, etc.
2. Plug the handset cord into the handset. Plug the other end into the
side of the base unit.
3. Place the handset on the base unit.
4. Plug one end of the telephone line cord into the socket of the base
unit, and the other end into your telephone line wall socket.
5. Lift the handset and check for a dial tone.
Make sure the plugs click into
place.
Ringer HI/LOW switch.
To telephone line wall socket.
Always use the telephone line cord supplied with your telephone. Other telephone
line cords may not work.
8
Wall Mounting (optional)
1. Mark two points on the wall that are 80mm apart to lay the fixing
centres as shown below.
Wall
Wall plug
Screw
80mm
wall mount slots
2. Drill holes in the wall.
3. Insert the wall plugs into the holes.
4. Drive in the screws and make sure to leave approximately 5mm of the
screw head from the wall to hold the base unit securely.
5. Hang the base unit on the screws using the wall mount slots.
Before you drill any holes, make sure there is no electrical wiring or pipes hidden
in the wall.
9
Parking
Recess
Parking Hook
Slide-out
Rotate
Slide-back in
1
2
3
6. You may need to remove the telephone from the wall and tighten the
screws so that the base unit is securely fixed and does not wobble.
Place the Handset on the base unit with the parking hook on the base
unit arranged to fit in the parking recess under the earpiece on the
handset.
10
Control Overview
1
5
12 13 14 15
6 7
8
2
9
3
4
10
11
Table of contents
Other Logik Telephone manuals
