Logik lbudox16 User manual
1 | EN
DOUBLE BUILT IN OVEN SERVICE
MANUAL
2 | EN
1.COVER
2.INDEX
1. COVER
2.INDEX
1.COVER ......................................................................................................................................2
3. SAFETY WARNING ....................................................................................................................5
3.1 GENERAL SAFETY ...............................................................................................................................5
3.2. SAFETY FOR CONFİGURATİONS .............................................................................................................5
3.3 INFORMATİONS FOR CONSUMER ...........................................................................................................6
4. TECHNICAL SPECIFICATIONS .....................................................................................................7
5. PRODUCT ASSEMBLY/ ASSEMBLY RULES/ SETTINGS .................................................................8
5.1 PRODUCT TRANSPORTATION ................................................................................................................8
5.2UNPACKING PRODUCT ........................................................................................................................9
5.3 CONTROLLING THE SETUP PLACE AND ENERGY SOURCES ...........................................................................11
5.3.1 Measurement control of the mounting place ......................................................................11
5.4 ELECTRİCAL CONNECTİON...................................................................................................................12
6. USE OF PRODUCTS .................................................................................................................13
6.1 OPERATING FUNCTIONS.....................................................................................................................13
6.3 USE OF PRODUCT HOURS ..................................................................................................................15
6.3.1 Digital clock products (6 keys)..............................................................................................15
Using the oven clock......................................................................................................................17
Using the clock as an alarm ..........................................................................................................25
6.3.2 Adora clock products ............................................................................................................27
7.BY PRODUCTS/PRODUCTS LABELS USED..................................................................................37
7.1 ACCESSORIES...................................................................................................................................37
7.2 TAGS AND DESCRIPTIONS USED IN THE PRODUCT ....................................................................................38
7.2.1 Type the label .......................................................................................................................38
7.2.2 Barcode Label .......................................................................................................................39
7.3.3 Energy Label .........................................................................................................................39
8. GENERAL WORKING PRINCIPLE...............................................................................................41
9. LIST OF COMPONENTS / COMPONENT WORKING PRINCIPLE...................................................42
9.1 TECHNICAL SPECIFICATIONS OF THE COMPONENTS; .................................................................................42
10. FAULT FLOW / FAULT FINDING DIAGRAMS ...........................................................................44
10.1.RESİSTANCE FAULTS .......................................................................................................................44
10.1.1 Resistance does not work;the food is not cooked ..............................................................44
10.2 LAMP FAULT .................................................................................................................................45
10.2.1 Furnace is working but the oven does not illuminate ........................................................45
10.2.2 Oven does not work,oven lamp does not light,..................................................................46
10.3 TERMOSTAT FAULT.........................................................................................................................47
10.3.1 Furnace runs continuosly,the thermostat is not tripped....................................................47
3 | EN
10.4 THERMİNAL FAULT .........................................................................................................................48
10.4.1There is no power from the terminal does not diffuse into the electric furnace ................48
10.4.2 When the fuse blows the oven is plugged into the Wall socket.........................................49
12. COMPONENT ASSEMBLY / DISASSEMBLY BE USED IN EQUIPMENT........................................52
13.COMPONENT ASSEMBLY / DİSASSEMBLY...............................................................................53
13.1 REPLACEMENT OF THE KNOB .............................................................................................................53
13.2 REPLACEMENT OF THE UPPER COVER SHEET .........................................................................................53
13.3 REPLACEMENT OF THE CONTROL PANEL ..............................................................................................54
13.4 REPLACEMENT OF THE FRONT DOOR...................................................................................................56
13.5 REPLACEMENT THE FRONT DOOR HINGE..............................................................................................57
13.6 REPLACEMENT OF THE REMOVABLE GLASS COVER 3...............................................................................58
13.7 REPLACEMENT OF THE REMOVABLE GLASS COVER 2...............................................................................60
13.8 REPLACEMENT OF THE REMOVABLE GLASS COVER 4...............................................................................65
13.9 REPLACEMENT OF THE HANDLE .........................................................................................................68
13.10 REPLACEMENT OF THE COMUTATORS ...............................................................................................69
13.11 REPLACEMENT OF THE OVEN THERMOSTAT ........................................................................................70
13.12 REPLACEMENT OF THE THERMOSTAT BULB.........................................................................................71
13.13 REPLACEMENT OF THE Bİ-METAL THERMOSTAT ..................................................................................73
13.14 REPLACEMENT OF THE ENGINE COOLING ...........................................................................................73
13.15 REPLACEMENT OF THE VENTILATION PLATE ........................................................................................74
13.16 REPLACEMENT OF THE VENTILATION THERMOSTAT ..............................................................................75
13.17 REPLACEMENT OF THE REAR COVER SHEET .........................................................................................77
13.18 REPLACEMENT OF THE SIDE WALLS ..................................................................................................78
13.19 REPLACEMENT OF THE BOTTOM PLATE..............................................................................................79
13.20 REPLACEMENT OF THE SWİTCH........................................................................................................80
13.21 REPLACEMENT OF CATALIYTIC SIDE WALLS .........................................................................................82
13.22 REPLACEMENT OF TOP HEATİNG ELEMENT .........................................................................................83
13.23 REPLACEMENT OF THE BOTTOM HEATİNG ELEMENT............................................................................85
13.24 REPLACEMENT OF THE RING HEATER.................................................................................................86
13.25 REPLACEMENT OF THE SEAL OVEN....................................................................................................88
13.26 REPLACEMENT OF THE TURBO MOTOR ..............................................................................................89
13.27 REPLACEMENT OF THE TERMINAL BOX ..............................................................................................91
13.28 REPLACING THE RUNNERS ..............................................................................................................93
13.29 REPLACING THE OVEN LAMP ...........................................................................................................93
13.30 REPLACEMENT OF THE OVEN SQUARE LAMP ......................................................................................94
13.31 REPLACEMENT OF THE SİGNAL LAMP ................................................................................................95
13.32 REPLACEMENT OF THE GLASS WOOL ...............................................................................................96
13.33 REPLACEMENT OF THE 6BUTTON HOURS..........................................................................................98
13.34 REPLACEMENT OF THE ADORA TIMER...............................................................................................99
14. PYRO OVEN SPECIFICATIONS ASSEMBLY / DİSASSEMBLY ....................................................102
14.1 ISOLATION SHEET METAL CONNECTION .............................................................................................102
14.2 DISPLACEMENT OF CATALYSOR .......................................................................................................103
14.3 REPLACEMENT DOOR LOCK.............................................................................................................103
14.3 REPLACEMENT OF THE VENTILATION SHEET........................................................................................105
14.3 REPLACEMENT OF THE PYRO VENTİLATİON SHEET METAL.......................................................................107
4 | EN
14.4 CHANGING THE PYRO COOLING ENGINES ...........................................................................................107
14.5 REPLACING THE ENGINE COOLING THERMOSTAT .................................................................................108
5 | EN
3. SAFETY WARNING
This section contains safety instructions that will help protect from risk of personal
injury or property damage.
Throughout this user manual the following symbols are used.
Important information or useful hints about usage.
Warning of hazardous situations with regard to life and property.
Warning of electric shock..
Warning of risk of fire.
Warning of hot surfaces.
3.1 General Safety
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
•Installation and repair procedures must always be performed by Authorized
Service Agents. The manufacturer shall not be held responsible for damages
arising from procedures carried out by unauthorized persons which may also void
the warranty. Before installation, read the instructions carefully.
•Do not operate the product if it is defective or has any visible damage.
Control that the product function knobs are switched off after every use.
3.2. Safety for Configurations
Control the area of the configuration is appropriate.
It is important that sources of energy is near the product.
Do not lay the network wire on the hot surface.If not wire coalasces and this couses
short circuit.
Be cafeful during the configuration wire is not cut or deformed.If not change them with
new one.
There is not a component to release the gases resulting of the burning in the
product.Set up the product according to the configuration rules.Especially,be careful
with the airing tools and needs.
6 | EN
3.3 Informations for Consumer
Product may be hot during the usage.Do not touch with hot parts ,inside the
oven,heating components etc. .When the product is working it is hot so do not put
combustable materials near the product.
Do not wash the product with water! It is dangerous for electrick shock!Ürünü, üzerine s
Do not heat the closed preserve jar or can with the product.Presure may cause the
explosion.
Do not clean while the product is working.
Do not change in anything on the porduct or any repair instead of some problems in the
user guide.
If there is no door or window for airing ,blower must be built.
Use a glove that is heat resistant during put/remove the meal to the hot oven
Do not use the product if front glass is broken or removed or any deformation on the
tweel block.
When tweel block is open, be careful about children do not sit down on it.
Do not hang cloth or towel or something like them on handle.
7 | EN
4. TECHNICAL SPECIFICATIONS
Refer to the product specifications manusoft.
8 | EN
5. PRODUCT ASSEMBLY/ ASSEMBLY RULES/ SETTINGS
5.1 Product Transportation
Control the view of the product for any damage which may occur in the carrying period.
To carry or move the product, do not use
door or handle of the product. Door,
handle or hinges can be harmed.
Product should be carried by two person for
safety of the product and ergonomics
When the product is being carried or the
product is being put to the ground, do not put it
keenly, do not drag it and do not skid it from
stairs.
9 | EN
5.2 Unpacking Product
To consider product changing in the mounting process, please do not harm package,
product and the product package when extracting.
Take lathes on the product’s front and behind sides, like shown in below.
Extract package with a knife without harming top
and bottom carton.
Take the top carton.
10 | EN
Symbols on the package of the products and meaning of them;
Preserve
from damp
Fragile
Carry with
barrow in
this way.
Do not carry
the product
like in the
picture
Carry the product
in this way by
squeezing with
clamp
Do not step on
the product.
Take stripers which are left and
right side of the products.
Other manuals for lbudox16
1
Table of contents
Other Logik Oven manuals
Logik
Logik LBFANW12 Parts list manual
Logik
Logik LCPCKX11 Parts list manual
Logik
Logik LBFANW10 Parts list manual
Logik
Logik LBMFMX14 User manual
Logik
Logik LBPCKX12 Parts list manual
Logik
Logik LBMULX10 Parts list manual
Logik
Logik L18MOV12 User manual
Logik
Logik LMF65SSTDN User manual
Logik
Logik LBIDOX16 User manual
Logik
Logik LBMFMX15 User manual
Logik
Logik lbudox16 User manual
Logik
Logik LBMFMX17 User manual
Logik
Logik L25MOV10 User manual
Logik
Logik LBPCKX10 Parts list manual
Logik
Logik LBMULX11 Parts list manual
Logik
Logik LBFANB16 User manual
Logik
Logik L18MOV13 User manual
Logik
Logik LBFANW14 User manual
Logik
Logik LBMULB13 Parts list manual
Logik
Logik LDOC60W17 User manual
