Livestrong LS7.0B User manual
LS7.0B
EXERCISE BIKE OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE DU VÉLO D’EXERCICE
MANUAL DEL PROPIETARIO DE LA BICICLETA ESTACIONARIA
2
LIVESTRONG® is a registered trademark of the Lance Armstrong Foundation.
The Lance Armstrong Foundation fights for the more than 25 million people around the world living with cancer today. There can be – and should be – life after cancer for more people. The
Foundation’s support kicks in at the moment of diagnosis, giving people the resources and support they need to fight cancer head-on. They find innovative ways to raise awareness, fund research
and end the stigma about cancer that many survivors face. They connect people and communities to drive social change, and call for state, national and world leaders to help fight this disease.
Anyone, anywhere can join the fight against cancer. Join them at LIVESTRONG.org.
INTRODUCTION
Congratulations and thank you for your purchase of this LIVESTRONG® exercise bike!
Purchases of this product ensure that a minimum of $4M will go to the Lance Armstrong Foundation and the fight against cancer.
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a LIVESTRONG® exercise bike can help
you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features
you need to get stronger and healthier, faster. Because we’re committed to designing fitness equipment from the inside
out, we use only the highest quality components. It’s a commitment we back with one of the strongest frame-to-brake
warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.
LIVESTRONG® exercise bikes deliver.
2 ENGLISH
38 FRANÇAIS
74 ESPAÑOL
3
IMPORTANT PRECAUTIONS
SAVE THESE INSTRUCTIONS
When using an exercise product, basic precautions should always be followed, including the following: Read all instructions
before using this exercise bike. It is the responsibility of the owner to ensure that all users of this exercise bike are adequately
informed of all warnings and precautions. If you have any questions after reading this owner’s manual, contact Customer Tech
Support at the number listed on the back panel.
4
READ AND SAVE ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS
EXERCISE BIKE. IT IS STRONGLY RECOMMENDED TO TAKE THE FOLLOWING SAFETY
INSTRUCTIONS.
• CAUTION: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your
physician before continuing.
• Use this exercise bike for its intended purpose as described in this manual. Do not use attachments that have not been
recommended by the manufacturer.
• Never operate the exercise bike if it is not working properly, or if it has been damaged. Contact Customer Tech Support or the
authorized dealers for examination and repair.
• Do not use the exercise bike without proper footwear. NEVER operate the exercise bike with bare feet.
• Do not wear any clothing that might catch on any moving parts of this exercise bike.
• Keep hands and feet clear at all times from moving parts to avoid injury. Never turn the pedal cranks by hand.
• Do not dismount the exercise bike until the pedals are at a complete STOP.
• Do not attempt to ride the exercise bike in a standing position at high RPMs until you have practiced at slower speeds.
• Do not insert any object, hands or feet into any openings, or expose hands, arms or feet to the drive mechanism or other potentially
moving part of the exercise bike.
• Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Customer Tech
Support or the authorized dealers.
• Do not operate where aerosol (spray) products are being used or when oxygen is being administered.
• Close supervision is necessary when used near children, invalids or disabled people.
• When the exercise bike is in use, young children and pets should be kept at least 3 meters / 10 feet away.
• Ensure that adjustment levers (seat and handlebar fore-and-aft) are properly secured and do not interfere with range of motion
during exercise.
WARNING
5
ASSEMBLY
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
exercise bike could have parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to
the exercise bike, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your exercise bike’s serial number located on
the front stabilizer tube and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
» Be sure to enter both the SERIAL NUMBER and MODEL NAME on your warranty card.
MODEL NAME: LIVESTRONG LS7.0B EXERCISE BIKE
WARNING
SERIAL NUMBER:
BK
SERIAL NUMBER LOCATION
6
CRANK
TOP CAP
WATER BOTTLE HOLDER
PULSE GRIP
HANDLEBARS
REAR STABILIZER TUBE
CONSOLE MAST HANDLEBARS
POWER CORD SOCKET
CONSOLE
IPOD/MP3 PLAYER POCKET
SEAT SLIDE
SEAT POSITION ADJUSTMENT LEVER
FRONT STABILIZER TUBE
SEAT BACK
SEAT BASE
SEAT FRAME
PEDALS
TOP CAP GROMMET
FRONT SHROUD
WARNING
CONSULT A PHYSICIAN PRIOR TO USING ANY
EXERCISE EQUIPMENT. POSSIBILITY OF
SERIOUS INJURY IF EQUIPMENT IS USED
IMPROPERLY. READ INSTRUCTION MANUAL
BEFORE USING. KEEP CHILDREN OFF AND
AWAY FROM THIS EQUIPMENT. FOR
CONSUMER USE ONLY.
AVERTISSEMENT
CONSULTER UN MÉDECIN AVANT D’UTILISER
CET ÉQUIPEMENT. POSSIBILITÉ DE BLESSURES
SÉRIEUSES SI L’ÉQUIPEMENT EST UTILISE DE
MANIÈRE INCORRECTE. AVANT USAGE, LIRE LE
GUIDE D’UTILISATEUR. NE PAS LAISSER CET
ÉQUIPEMENT À LA PORTÉE DES ENFANTS.
POUR USAGE DOMESTIQUE UNIQUEMENT.
PRECAUCIÓN
CONSULTAR CON UN MEDICO ANTES DE USAR ESTE
EQUIPO. POSIBILIDAD DE RESULTAR EN HERIDAS
GRAVES SI EL EQUIPO ESTÁ UTILIZADO
IMPROPIAMENTE. LEER LA GUÍA DE
INSTRUCCIONES ANTES DE USAR.MANTENER
NIÑOS PEQUEÑOS ALEJADOS DE LA MÁQUINA.ESTE
EQUIPO ES SÓLO PARA EL USO DEL CONSUMIDOR.
CAUTION AVERTISSEMENT PRECAUCIÓN
KEEP HANDS AND FEET
AWAY FROM THIS AREA.
GARDER LES MAINS ET LES
PIEDS LOIN DE CETTE REGION.
MANTENGA LAS MANOS Y LOS
PIES LEJOS DE ESTA AREA.
CONSOLE MAST
7
TOOLS INCLUDED:
F5mm Allen Wrench
F5mm T Wrench
F13/15mm Flat Wrench
FPhillips Screwdriver
PARTS INCLUDED:
F1 Console
F1 Console Mast
F2 Pedals
F1 Top Cap
F1 Top Cap Grommet
F1 Seat Back
F1 Seat Base
F1 Rear Stabilizer Tube
F1 Pulse Grip Handlebar
F1 Seat Frame
F1 Rear Plastic Cap
F1 Water Bottle Holder
F1 LIVESTRONG.COM USB Stick
F1 Audio Adapter Cable
F1 Power Cord
F1 Hardware Kit
UNPACKING
Unpack the product where you will be using it. Place the exercise bike carton on a
level flat surface. It is recommended that you place a protective covering on your
floor. Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
NEED HELP?
PRE ASSEMBLY
8
ASSEMBLY STEP 1
A Open HARDWARE BAG 1.
B Attach the REAR STABILIZER TUBE to the
MAIN FRAME using 2 BOLTS (A).
C Attach the SEAT FRAME to the SEAT SLIDE
using 4 BOLTS (B).
D Adjust the 3 LEVELERS so that the bike does
not rock and is level on the floor.
E Attach the REAR PLASTIC CAP to the MAIN
FRAME.
BOLT (A)
20 mm
Qty: 2
BOLT (B)
10 mm
Qty: 4
HARDWARE BAG 1 CONTENTS :
BOLTS (A)
REAR STABILIZER TUBE
MAIN FRAME
SEAT FRAME
BOLTS (B)
SEAT SLIDE
REAR
PLASTIC CAP
LOCK ADJUSTMENT
ADJUST HEIGHT
LEVELERS
9
ASSEMBLY STEP 2
A Open HARDWARE BAG 2.
B Attach the PULSE GRIP WIRES from
the rear of the exercise bike to the PULSE
GRIP WIRES from the PULSE GRIP
HANDLEBAR.
C Press the COVERED PULSE GRIP WIRES
into the PLASTIC CLIP as shown above. Tuck
the EXPOSED WIRES into the RECESS
under the PULSE GRIP HANDLEBAR.
D Attach the PULSE GRIP HANDLEBAR to the
SEAT SLIDE using 4 BOLTS (B).
BOLT (B)
10 mm
Qty: 4
HARDWARE BAG 2 CONTENTS :
NOTE: Tuck in wires as shown. Be sure that the pulse grip wires
will not be crushed when adjusting the seat back and forth.
PLASTIC CLIP
EXPOSED WIRES
RECESS
PULSE GRIP HANDLEBAR
BOLTS (B)
COVERED PULSE
GRIP WIRES
SEAT SLIDE
PULSE GRIP WIRES
10
ASSEMBLY STEP 3
A Open HARDWARE BAG 3.
B Attach the SEAT BASE to the SEAT FRAME
using 4 ARC WASHERS (C) and 4 BOLTS (D).
C Attach the SEAT BACK to the SEAT FRAME
using 4 ARC WASHERS (C) and 4 BOLTS (D).
BOLT (D)
35 mm
Qty: 8
ARC WASHER (C)
17 mm
Qty: 8
HARDWARE BAG 3 CONTENTS :
SEAT FRAME
SEAT BASE
SEAT BACK
BOLTS (D)
ARC WASHERS (C)
Table of contents
Languages:
Other Livestrong Exercise Bike manuals
Livestrong
Livestrong LS9.9IC User manual
Livestrong
Livestrong 2010 EB LS User manual
Livestrong
Livestrong LS6.0R User manual
Livestrong
Livestrong LS5.0R User manual
Livestrong
Livestrong 2010 SB LS User manual
Livestrong
Livestrong LS9.9IC User manual
Livestrong
Livestrong 2010 SB LS User manual
Livestrong
Livestrong LS5.0R User manual
Livestrong
Livestrong LS9.9IC User manual
Livestrong
Livestrong LS5.0R User manual
