Liquid LEDs Smart Colour String Lights User manual
SAFETY INFORMATION
• Sockets used to power smart string lights should comply with all national
and local electrical codes. If you are unsure of compliance requirements,
please consult your local electrician.
• Do not operate the bulbs without tightening string lights, making sure to
unplug the smart string lights during installation to avoid damage to the
power cord and lamp assembly during installation.
• Do not use in water. Do not use extension cords or places where water may
accumulate near water. Take care to keep the bulb at least 8meters from the
surface of the water. Keep the plug and socket dry.
• Do not install the smart light string in a position where you can step on it.
Not be allowed for children to play smart string lights should be installed
out of reach of children.
• SAA recommends testing power plug and outlets monthly to ensure proper
operation.
• Regularly check the smart string lights for physical damage or other damage
caused by outdoor exposure to components, and replace any damaged
smart string lights components in time.
Smart String Lights are designed to be mounted with their individual keyhole
mounting feature.
Do not mount Smart String Lights by using the main electrical cord or the
individual drop cords.
Smart String Lights are designed to have limited linkability by using their
electrical plugs and receptacles.
Do not mount Smart String Lights in any position where the bulb is facing up.
Do not allow the LED lamp assemblies to be in contact with combustilble
materials.
IMPORTANT: READ ALL THE SAFETY INFORMATION AND INSTALLATION
INSTRUCTIONS BEFORE INSTALLING OR SERVICING THIS PRODUCT.
KEEP THIS MANUAL FOR REFERENCE.
Warning:
RISK OF ELECTRIC SHOCK
RISK OF FIRES
2
LED lamp assemblies should hang freely and not be susceptible to repetitive
damage caused by environmental conditions such as wind, rain, and ice.
Not intended for installation in ceilings, soffits, cabinets, attics, or other
enclosed spaces.
Operation is subject to the two following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with SAA. These
limits are designed to provide reasonable
protection against harmful interference in a residential installation.
The LiquidLEDs Smart String Lights are perfect for any occasion! Control
your String lights using Alexa, Google Voice Assistant or control them with any
WiFi-enabled smartphone/tablet in the tuya smart app (available for Android
or iOS). The Tuya smart app allows you to control the Smart String Lights
throughout your entire house, indoors and out, at the touch of a button. Turn
your lights on and off from anywhere!
CAUTION: Suitable for outdoor /indoor use only.
DO NOT IMMERSE IN WATER DO NOT EXCEED RATED CAPACITY
SAA Notice:
3
Thank you for purchasing the LiquidLEDs Smart String
Lights
Inside the package you'll find:
15 Meter Smart String Lights
1. Carefully unpack Smart String Lights from the box.
2. Before installing, plug the Smart String Lights into an
outlet to ensure all lights work properly.
Overall Length: 15 meter
Number of Sockets: 15
Bulbs Included: 15
Input Volts: 110-250 V AC
Output Volts: 12 V DC
Rated Wattage: 7.5 W
Max Wattage: 24 W
Bulb Wattage(each): 0.5 W
Cord Color: Black
Bulb Color: RGBCW
4
Step 1: Initial Setup
Specifications:
IMPORTANT:Unplug the Smart String Lights prior to mouting
5
Installing By Guide Wire
Step 2: Installing
1. Attach to structure to the
sixth or seventh holder
in middle of each
String Light. 2. Attach to structure on first
and last holder.
3. Installing by Structure Connect securely to structure at the
beginning,middle and end of each string light.
Attach ring at the back of every bulb holder to the guide wire using
an S-hook or cable tie (not included)
Attach Using
hooks or cable ties
Guide Wire
Wire to
Structure
Wire to
Structure
NOTE: Attachment hardware, such as hooks or nylon cables
ties is not included.
6
Step 3: Plug - In
Plug LiquidLeds Smart String Lights into any standard outlet
7
Tuya
Tuya
Step 4: Download App
Download the Tuya App from the App Store or Google Play.
8
Step 5: Register
1. Enter your mobile phone number or email address.
9
2. Enter the verification code
and create a passwoord.
3. Log into the APP
10
Tuya Tuya
Tuya
“Tuya”
Step 6: Add Device
1. Enter your mobile phone number or email address.
Please select “Allow While Using APP”
positioning function when connecting
products with APP.
1. Select “Add Device” or
click"+"at the top right
corner of the homepage
2. Click “Add” from Discovering
devices
Table of contents
Other Liquid LEDs Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
