Lion Tree Supernova 240 Std User manual
END USER MANUAL FOR LION TREE
We would like to Thank You for purchasing a Lion Tree product. We know you
will have many years of use. We would like you to please have a read through
the manual before using the product.
Keep it in a safe place for future use.
DESCRIPTION
Lion Tree lights have been manufactured with the end user in mind. Our lights
can be used in vertical farming, as well as greenhouse indoor and tent growing.
Please contact us should you need any advice or assistance.
WARNING
This product should only be used as it is intended.
PRODUCT SPECIFICATIONS
Model
Size LxBxH
Weight
Draw
Supernova 240 Std
730 x 330 x 110
4.7 Kg
Max. 237W
Supernova 240 Adv
730 x 330 x 110
5.4 Kg
Max. 242W
Supernova 320 Std
880 x 330 x 110
6.9 Kg
Max. 318W
Supernova 320 Adv
880 x 330 x 110
7.5 Kg
Max. 321W
Double barrel Std
610 x 160 x 110
3.1 Kg
Max 101W
Double barrel Adv
610 x 160 x 110
3.9 Kg
Max. 105W
Limpet 200
310 x 310 x 135
3.5Kg
Max. 198W
Operating temperature (Est) 45-58 C⁰
Certification. All components used in the manufacturing of Lion Tree Lights have been CE,
TUV, DLE certified as well as NRCS accredited.
Product Features
•90% dimmable, enabling greater control in all stages of growth
•Customised waterproof LED housing with photometric lenses
•White light with customized full spectrum, for vegetative and flowering cycle
•Added Deep Red spectrum 660nm
•90 % Dimming
•90 / 140 degree beam angle, can be customised.
•Low operating temperature 40-50 degrees Celsius.
•Water and humidity proof (IP 65/ K10
•Working voltage: 90-305Volts @ 50-60Hz
•5 year warranty on all parts and construction
•MOSO drivers available
•CE, RoHS, CB, LM-79, LM-90 approve
•Bridgelux chip set.
OPTICS AND LIGHT DISTRIBUTION
Loin Tree lights come equipped with 90/140 Degree Optical grade lenses, that
focus the light where it is needed. With optimal spacing between modules we
have allowed for the crossing of light, to create an even level of PPFD,
throughout the grow area. The lenses further protect the chip set, against
moisture and dust ingress.
PAR, PPF, PPFD AND ENERGY
DISTRIBUTION
Lion Tree LED grow lights have been designed to be as efficient as possible.
You will find all the specific information with regards to these values on the Lion
Tree website. www.liontree.co.za
Please have a look at the below recommended hanging heights to maximise light
energy distribution.
RECOMMENDED HANGING HEIGHTS
Veg 400 PPFD
Mid flower 650 PPFD
End flower 650/800 PPFD
Veg stage Mid flower End
flower
Supernova 320
700/800 mm
500/600mm
450/500mm
Supernova 320 S
500/600mm
400/500mm
300/350mm
Supernova 240
700/800 mm
500/600mm
450/500mm
Supernova 240 S
400/500mm
400/350mm
300/350mm
Double Barrel 100W
600mm
500mm
450mm
Double Barrel 100W S
500mm
450mm
300mm
Limpet 200W
500 mm
400mm
350mm
INSTALLATION OF FITTING
Before installing the fitting, please make sure the unit is not plugged in
and the power is off.
After opening the box, please ensure all is in order, before use. Please feel free to
contact us should you need any assistance.
Install light fitting at recommended height for plant cycle, take into consideration
the PPFD Map to determine, the perfect placing of plants under the light footprint.
Use the hangers on the fitting to attach/ hang your light to a solid structure. Make
sure the structure is strong enough to hold the fitting.
Lion Tree lights come with a South African 3 pin plug and is compliant with South
African laws.
Do not cover the fins of the fitting at any time. The heat sink is designed to move
heat away from the LEDs, obstructing this could lead to LED failure.
WARNING AND SAFETY
Do not open the light fitting at any time, as this causes risk of electrical shock as
well as voiding the warranty on the fitting.
Never look directly into the light
Always use LED eye protection when working in the area, when the fitting is on.
The user is responsible for installing the light to make sure it is safe and works
correctly, should you have any doubts, please contact a qualified person to assist
with installation.
Lion Tree will not be held liable for the product being installed incorrectly.
CLEANING OF FITTING
Please ensure that the fitting has been unplugged from the mains before,
cleaning takes place.
Ensure the fitting has cooled down before cleaning.
Use a soft wet cloth to clean the lenses and body work. The lenses are made from
polycarbonate, please be extra careful when cleaning the lenses. You could use a
light soap mix to wipe them down with a soft damp cloth. Ensure lenses are clear
after. Don’t use solvents, window cleaner, chemicals that are aggressive.
Lion Tree fittings are IP67 rated meaning, they will not be affected by over spray
from the grow environment.
Please don’t use abrasive materials on lenses.
Clean fitting in between every grow in order, to prevent cross contamination
between crops.
We Thank You for supporting Lion Tree and we look forward to your review of
the product on our website.
Welcome to the Lion Tree Family.
Thanking you
The Lion Tree team
This manual suits for next models
6
Table of contents
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
