Part 2 -Kit assembly
8
Tools required
It is expected that the kit builder has some soldering experience. Always use a fine tipped soldering iron.
It is not advisable to use a heavy industrial unit.
Use fine solder when assembling.
Some basic tools are required for assembly.
A soldering station, a small screwdriver, small side cutters, pointed nose pliers, a small craft knife and ruler.
A multimeter is advisable to check voltages and polarities. A drilling machine, a 1,5 mm drill bit, 7mm and 6 mm
drill bits are required. A small toothbrush and benzine to clean the pcb after soldering.
A smartphone will aid in determining left and right headphone connections when connecting.
Download a “left and right” app from aapp store as this makes it very simple to set the correct speaker
when assembled.
Benzine and a small toothbrush will be required to clean the printed circuit board when complete.
The kit is supplied as a complete package, the assembled kit works and has been in service.
It performs to expectations. Aenclosure is not provided.
When assembling, ensure that components are not overheated by poor assembly equipment.
When using soft solder, always wash hands before consuming foodstuffs, avoid contact with lead.
