Linsar LS50UHDZEN User manual
User Manual
LS50UHDZEN
50" 4K Ultra HD
Smart TV
2
Welcome
Welcome to Linsar!
This user manual tells you all you need to know about setting up your newTV.
Please take special note of any important safety and usage information presented with the symbol.
All products brought to you by Linsar are manufactured to the highest standards of performance and safety
and, as part of our philosophy of customer service and satisfaction, are backed by a comprehensive
3Year Warranty.
3
Contents
Welcome 2
Unpack and Prepare 4
What's in the Box 4
ImportantTips 5
Attaching the Stand 6
Wall-Mounting theTV 7
Connect to Power 8
Connect your Antenna 8
Controls and Connections 9
Get to Know yourTV 9
Buttons on theTV 9
Ports on theTV 10
Remote Control 12
Setup 12
Using the Remote Control 13
Remote Pairing 13
Smart Remote 14
Pairing the Remote 15
Using Voice Assistant 15
On-Screen Set Up 16
DisplayingYour Smart Phone
ScreenToThe TV 17
DisplayingYour PC Screen
ToThe TV 17
ControlTheTV With A Keyboard,
Mouse or Gamepad 17
UsingThe Keyboard And Mouse 18
Smart TV 19
Smart Hub 19
Using the On-Screen
Virtual Keyboard 20
Home Screen 21
Samsung Account 23
Using the Apps Service 24
Using the e-Manual 25
System and Support 26
High Dynamic Range (HDR) 30
TV Guide 31
Troubleshooting 33
Specications 36
Compliance and
Responsible Disposal 37
4 | UNPACK AND PREPARE
D
Unpack and Prepare
See the flap of the box
for how to handle theTV
without damaging it!
What's in the box
In the box you will find:
A. 50" 4K Ultra HD SmartTV
B. Smart Remote
C. AAA Batteries
D. TV Stands
E. Screws forTV Stands
F. Warning Sheet
G. TVToppling Safety Message
H. Quick Start Guide
I. Warranty Certificate
J. General Safety Warnings
K. User Manual
You will need:
• Phillips-head screwdriver (for stand installation)
• Someone to help you lift and install yourTV
• Antenna cable (to watch liveTV)
• Broadband internet connection (to use smart apps)
Before installing your newTV, check you have everything needed.
UNPACK AND PREPARE | 5
Important Tips
• Place theTV on a level surface.
• Place theTV away from any source that may generate heat or vibrations.
• Make sure there is enough space around vents for airflow.
• The remote control works up to 5 metres away from theTV.
• Unplug theTV before cleaning it.
• Clean using a dry cloth only - do not use water or chemicals.
• Use only the power supply provided.
• It is highly recommended to use safety straps for securing theTV in place.
• Keep liquid, children and pets away from theTV at all times.
6 | UNPACK AND PREPARE
Attaching the stand
• ThisTV is heavy! We recommend asking
someone to help you lift it.
• Unplug theTV from the power outlet before
installing or removing the stand.
• DO NOT place theTV standing upright without
its stand attached; it could damage the remote
sensor at the bottom of theTV.
• Only touch the frame, not the screen.
• It is highly recommended to use safety straps
for securing theTV.
CAUTION!
Do not apply
excessive force as
you might damage
the screw holes.
Unless you are wall-mounting theTV, you will need to
attach its stand/legs.
1. Lay theTV face-down on a soft, flat surface (like
the sofa, or a towel on a table) larger than theTV
itself.
2. Match the stands to the installation points on the
underside of theTV.
3. Attach the stands to theTV at the installation
points using the screws provided. (Grab a
screwdriver for this bit).
1
2
3
3
UNPACK AND PREPARE | 7
400mm
Back of theTV
200mm
Wall-mounting the TV
TheTV comes with holes on the back panel for use
with wall-mounting brackets (bracket not included).
Use four standard M6*10mm screws (or longer,
depending on the mounting bracket) to wall-mount
thisTV (screws are not included).
• Unplug theTV from the power outlet
before wall-mounting.
• Contact a professional for assistance with
wall-mounting theTV.
Required
• VESA Mounting
Bracket
• 4 x M6*10mm
screws (or
longer as
required)
The screws in the package are for securing theTV
stand only. If you are wall-mounting theTV, consult a
qualified installer for advice on bracket support and
wall support.
8 | UNPACK AND PREPARE
Free-to-airTVinHD(HighDenition)
High Definition (HD) channels
provide the best viewing quality
and are available with a digital
antenna connection.
TV channels in Ultra HD resolution are
not currently available in Australia.
Therefore when you watch HD
broadcast signals on an Ultra HDTV,
the picture can appear 'soft' and lacks
the detail you see when watching the
same content on an HDTV.
Connect to power
Make sure theTV is switched off at the power outlet
until you have finished connecting your cables.
Connect your antenna
Antenna cable not included.
ABC HD
SBS ONE HD
7HD
9HD
10 HD
PRIME7 HD
WIN HD
Example
HD Channels
Don't forget to plug in theTV to
the power outlet. Leave the power
switched off until installation is
finished.
CONTROLS AND CONNECTIONS | 9
Controls and Connections
Get to know your TV
On/Standby light and Remote sensor
Buttons on the TV
• (On/Standby) : When theTV is off, press this
button to turn theTV on.
• When theTV is on, press once to access the on-
screen control menu.
• While on this menu, press once to switch between
menu options; press and hold for 1.5 seconds to
select.
Back of TV
10 | CONTROLS AND CONNECTIONS
Ports on the TV
1
HDMI IN
Use a high-speed
HDMI cable for
best picture and
sound quality.
SOUND
PICTURE
COMPUTER
All-digital connection between theTV and any HDMI device.
Supports Ultra HD. Requires a HDMI cable (not included).
2ANTENNA IN
FREETO-AIR
TV
Connect your antenna for liveTV. (Antenna cable not included).
3USB
STORAGE
Plug in a USB stick/drive to play media files stored on your
USB storage device (supported file codecs and extensions may
vary).
1 3
2
Table of contents
Other Linsar Smart TV manuals
