Linksys X2000 Operating and safety instructions
6
Product Overview
Linksys X2000/X3000
X3000
Top
Ethernet If the LED is continuously lit, the
modem router is successfully connected to a
device through that port.
Wi-Fi Protected Setup™ Button Press this
button to have Wi-Fi Protected Setup™ search for
your Wi-Fi Protected Setup™-supported wireless
device. The LED is continuously lit when a Wi-
Fi Protected Setup™ connection is successfully
established. The LED blinks slowly while Wi-Fi
Protected Setup™ is setting up a connection, and
blinks rapidly in amber if an error occurs. The LED
is off when Wi-Fi Protected Setup™ is idle.
Wireless The Wireless LED lights up when the
wireless feature is enabled. It flashes when the
modem router is actively sending or receiving
data over the network.
WAN Lights up white when the modem router
is connected directly to an ADSL line. Lights up
blue when the modem router is set up as a router
only and is connected to the internet through a
separate modem.
Power The Power LED lights up when the
modem router is powered on. When the modem
router goes through its self-diagnostic mode
during every boot-up, the LED flashes. When the
diagnostic is complete, the LED is continuously
lit.
7
Product Overview
Linksys X2000/X3000
Back
DSL—Connects to the ADSL line.
Cable—To use the modem router as only a router, use a
network cable to connect this port to a separate modem’s
LAN/Ethernet port.
Ethernet—Using Ethernet cables (also called network
cables), these Ethernet ports connect the modem router
to computers and other Ethernet network devices on your
wired network.
USB—For network-attached storage, connect an external
USB drive to this port.
Power—The Power port connects to the included power
adapter.
Power button—Press | (on) to turn on the modem router.
(Button not available on North American models.)
Bottom
Reset—This button allows you to reset the router to
its factory defaults. Press and hold the Reset button for
approximately five seconds.
Wall-mounting placement
The router has two wall-mount slots on its bottom panel. The distance between
the slots is 175.56 mm. Two screws are needed to mount the router.
Suggested Mounting Hardware
2.5-3.0 mm
4-5 mm 1-1.5 mm
NOTE
Cisco is not responsible for damages incurred by unsecured wall-
mounting hardware.
Follow these instructions:
1.
Determine where you want to mount the router. Make sure that the wall
you use is smooth, flat, dry, and sturdy. Also make sure the location is
within reach of an electrical outlet.
2. Drill two holes into the wall. Make sure the holes are 175 mm apart.
3. Insert a screw into each hole and leave 3 mm of its head exposed.
4. Position the router so the wall-mount slots line up with the two screws.
5. Place the wall-mount slots over the screws and slide the router down
until the screws fit snugly into the wall-mount slots.
175 mm
Wall-mounting template
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drill precise spacing.
28
Specifications
Linksys X2000/X3000
28
X3000
Standards WLAN: 802.11n, 802.11g, 802.11b
Ethernet: 802.3, 802.3u, 802.3ab
ADSL: T1.413i2, G.992.1 (G.DMT), G.992.2
(G.Lite), G.992.3 (ADSL2), G.992.5 (ADSL2+)
for Annex A, B, M, L, U-R2 for Annex B
USB 2.0
Ports DSL, Cable, Gigabit (10/100/1000) Ethernet (1-4),
Power, USB
Buttons On/Off, Reset, Wi-Fi Protected Setup™
LEDs Power, Ethernet (1-4), Wi-Fi Protected Setup,
Wireless, Internet
Cabling Type CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B)
Antennas 2 Internal
Modulations 802.11b: CCK/QPSK, BPSK
802.11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
802.11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
Transmit Power 802.11b: 12,5 ± 1,5 dBm
802.11g: 12,5 ± 1,5 dBm
802.11n: 12,5 ± 1,5 dBm
Receive Sensitivity 802.11b: -85 dBm (typical) @ 11 Mbps
802.11g: -70 dBm (typical) @ 54 Mbps
802.11n HT20: -68 dBm (typical) @ MCS15
802.11n HT40: -65 dBm (typical) @ MCS15
Antenna gain 802.11b/g/n: Right antenna 3,60 dBi
Left antenna 2,51 dBi
Security Features
WPA2™/WPA™ Personal and Enterprise;
128, 64 bits WEP; MAC Address Filtering;
SPI Firewall
OS Requirements Windows 7, Windows Vista, Windows Vista
(for Setup wizard) 64-bit edition, or Windows XP
Mac OS X 10.5 or higher
USB Storage Maximum supported capacity: 1 x 2 TB
Environmental
Dimensions 202 x 34 x 160 mm (8,0” x 1,3” x 6,3”)
Weight 335 g (11,8 oz)
Power 12VDC, 1,5A
Certification FCC, CE, Telepermit, K.21, UL, CB,
Wi-Fi (802.11b/g/n), WPA™, WPA2™, WMM,
Wi-Fi Protected Setup™
Operating Temperature 0 to 40°C (32 to 104°F)
Storage Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 10 to 85% Noncondensing
Storage Humidity 5 to 90% Noncondensing
NOTES
For regulatory, warranty, and safety information, see the CD that
came with your modem router or go to Linksys.com/support.
Specifications are subject to change without notice.
Maximum performance derived from IEEE Standard 802.11
specifications. Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage. Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions.
Other manuals for X2000
1
This manual suits for next models
1
Other Linksys Wireless Router manuals
Linksys
Linksys WRT160NL - Wireless-N Broadband Router User manual
Linksys
Linksys WRT54G - Wireless-G Broadband Router... User manual
Linksys
Linksys WRV200 User manual
Linksys
Linksys RT41-BU User manual
Linksys
Linksys WRT54G3G-ST User manual
Linksys
Linksys RangePlus WRT110 User manual
Linksys
Linksys WRT54GR - Wireless-G Broadband Router User manual
Linksys
Linksys WRT54G3G - Wireless-G Router For Verizon Wireless... User manual
Linksys
Linksys WRT150N - Wireless-N Home Router Wireless Original operating instructions
Linksys
Linksys MAX-STREAM MR6350 Owner's manual
Linksys
Linksys WRT55AG - Wireless A+G Broadband Router Original operating instructions
Linksys
Linksys BEFW11S4-AT User manual
Linksys
Linksys WRT54G3GV2-VF Original operating instructions
Linksys
Linksys WRT 1900AC User manual
Linksys
Linksys Small Business WRP400 Original operating instructions
Linksys
Linksys WRT400N - Simultaneous Wireless-N Router... User manual
Linksys
Linksys WRT55AG - Wireless A+G Broadband Router User manual
Linksys
Linksys EA-Series User manual
Linksys
Linksys 5G WiFi 6 User manual
Linksys
Linksys EA2750 User manual
