Linksys SRW2024P User manual

Model No.

USER GUIDE

BUSINESS SERIES

Model No.

24-Port 10/100/1000 Gigabit Switch

Model No. SRW2024P

with Webview and PoE

WIRED

WebView Switches

Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco

rights reserved. Other brands and product names are trademarks or registered trademarks of their respective

holders.

How to Use this User Guide

The User Guide to the WebView Switches has been designed to make understanding networking with the switch

easier than ever. Look for the following items when reading this User Guide:

In addition to these symbols, there are definitions for technical terms that are presented like this:

Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like

this:

Figure numbers and descriptions can also be found in the “List of Figures” section.

This exclamation point means there is a caution or

warning and is something that could damage your

property or the Switch.

word: definition.

This checkmark means there is a note of interest and

is something you should pay special attention to while

using the Switch.

This question mark provides you with a reminder about

something you might need to do while using the Switch.

Figure 0-1: Sample Figure Description

SRW2024P-UG-60807NC BW

WARNING: This product contains chemicals, including lead, known

to the State of California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

TableofContents

Chapter 1: Introduction 1

Welcome 1

Chapter 2: Getting to Know the Switch 3

Front Panel 3

The Back Panel 4

The Side Panel 5

LAN Ports 5

The Gigabit Expansion Ports 5

The Console Port 6

Chapter 3: Connecting the Switch 7

Overview 7

Before You Install the Switch... 8

Placement Options 9

Connecting the Switch 9

Uplinking the Switch 10

Chapter 4: Using the Console Interface for Configuration 11

Overview 11

Configuring the HyperTerminal Application 11

Connecting to the Switch through a Telnet Session 12

Configuring the Switch through the Console Interface 13

Chapter 5: Using the Web-based Utility for Configuration 25

Overview 25

Accessing the Web-based Utility 25

Setup Tab - Summary 26

Setup Tab - Network Settings 27

Setup Tab - Time 28

Port Management Tab - Port Settings 29

Port Management Tab - Link Aggregation 31

Port Management Tab - LACP 33

Port Management Tab - PoE Power Settings 34

VLAN Management Tab - Create VLAN 35

VLAN Management Tab - Port Settings 35

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

VLAN Management Tab - Ports to VLAN 36

VLAN Management Tab - VLAN to Ports 37

Statistics Tab - RMON Statistics 38

Statistics Tab - RMON History 39

Statistics Tab - RMON Alarm 40

Statistics Tab - RMON Events 42

Statistics Tab - Port Utilization 43

Statistics Tab - 802.1x Statistics 43

ACL Tab - IP Based ACL 44

ACL Tab - MAC Based ACL 46

Security Tab - ACL Binding 47

Security Tab - Authentication Servers 48

Security Tab - 802.1x Settings 49

Security Tab - Ports Security 51

Security Tab - HTTPS Settings 52

Security Tab - SSH Settings 53

SSH Host-Key Settings 54

QoS Tab 55

QoS Tab - CoS Settings 55

QoS Tab - Queue Settings 56

QoS Tab - DSCP Settings 57

QoS Tab - Diffserv Settings 57

QoS Tab - Diffserv Port Binding 60

QoS Tab - Bandwidth 60

Spanning Tree Tab 61

Spanning Tree Tab - Global Settings 61

Spanning Tree Tab - STP Settings 62

Spanning Tree Tab - STP Port Settings 63

Multicast Tab - Global Settings 66

Multicast Tab - Static Member Ports 67

Multicast Tab - Static Router Ports 67

Multicast Tab - Member Ports Query 68

Admin Tab - User Authentication 69

Admin Tab - SNMP 71

Admin Tab - Log 72

Admin Tab - Port Mirroring 74

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Admin Tab - Cable Test 75

Admin Tab - Save Configuration 76

Admin Tab - Jumbo Frame 76

Admin Tab - Reboot 78

Admin Tab - Factory Default 78

Appendix A: About Gigabit Ethernet and Fiber Optic Cabling 79

Gigabit Ethernet 79

Fiber Optic Cabling 79

Appendix B: Windows Help 80

Appendix C: Downloading using Xmodem 81

Startup Menu Procedures 81

Appendix D: Glossary 83

Appendix E: Specifications 90

Appendix F: Warranty Information 94

Appendix G: Regulatory Information 95

Appendix H: Contact Information 101

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

ListofFigures

Figure 2-1: Front Panel 3

Figure 2-2: Back Panel 4

Figure 2-3: Side Panel 5

Figure 3-1: Typical Network Configuration for the SRW2024P 7

Figure 3-2: Attach the Brackets to the Switch 9

Figure 3-3: Mount the Switch in the Rack 9

Figure 4-1: Finding HyperTerminal 11

Figure 4-2: Connection Description 11

Figure 4-3: Connect To 11

Figure 4-4: COM1 Properties 12

Figure 4-5: Telnet Login Screen 12

Figure 4-6: Switch Main Menu 13

Figure 4-7: System Configuration Menu 14

Figure 4-8: System Information Menu 15

Figure 4-9: Versions 15

Figure 4-10: General System Information 15

Figure 4-11: Management Settings Menu 16

Figure 4-12: Serial Port Configuration 16

Figure 4-13: User & Password Settings 17

Figure 4-14: IP Configuration Menu 17

Figure 4-15: IP Address Configuration 17

Figure 4-16: HTTP/HTTPS 18

Figure 4-17: SNMP 18

Figure 4-18: Ping Test 19

Figure 4-19: File Management 19

Figure 4-20: Restore System Default Settings 20

Figure 4-21: Reboot System 20

Figure 4-22: Back to Main Menu 20

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Figure 4-23: Port Status 21

Figure 4-24: Port Configuration 21

Figure 4-25: System PoE Configuration 22

Figure 4-26: Power Configuration 22

Figure 4-27: Power Port Status 22

Figure 4-28: Port PoE Configuration 23

Figure 4-29: Help 23

Figure 4-30: Log Out 23

Figure 5-1: Login Screen 25

Figure 5-2: Setup - Summary 26

Figure 5-3: Setup - Network Settings 27

Figure 5-4: Setup - Time 28

Figure 5-5: Port Management - Port Settings 29

Figure 5-6: Port Settings - Port Setting Detail 30

Figure 5-7: Port Management - Link Aggregration 32

Figure 5-8: Link Aggregation - Link Aggregation Select Member 32

Figure 5-9: Link Aggregation - Link Aggregation Detail 32

Figure 5-10: Port Management - LACP 33

Figure 5-11: Port Management - PoE Power Settings 34

Figure 5-12: VLAN Management - Create VLAN 35

Figure 5-13: VLAN Management - Port Settings 35

Figure 5-14: VLAN Management - Ports to VLAN 36

Figure 5-15: VLAN Management - VLAN to Ports 37

Figure 5-16: VLAN to Ports - Join VLAN 37

Figure 5-17: Statistics - RMON Statistics 38

Figure 5-18: Statistics - RMON History 39

Figure 5-19: RMON History Table 40

Figure 5-20: Statistics - RMON Alarm 40

Figure 5-21: Statistics - RMON Events 42

Figure 5-22: Statistics - RMON Events - Log Table 42

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Figure 5-23: Statistics - Port Utilization 43

Figure 5-24: Statistics - 802.1x Statistics 43

Figure 5-25: ACL - IP Based ACL 44

Figure 5-26: ACL - Mac Based ACL 46

Figure 5-27: Security - ACL Binding 47

Figure 5-28: Security - Athentication Servers 48

Figure 5-29: Security - 802.1x Settings 49

Figure 5-1: Security - 802.1x Settings - Port Settings 50

Figure 5-30: Security - Ports Security 51

Figure 5-31: Security - HTTPS Settings 52

Figure 5-32: Security - Management ACL 52

Figure 5-33: Security - SSH Settings 53

Figure 5-34: Security - SSH Host-Key Settings 54

Figure 5-35: QoS - CoS Settings 55

Figure 5-36: QoS - Queue Settings 56

Figure 5-37: QoS - DSCP Settings 57

Figure 5-38: QoS - Diffserv Settings 57

Figure 5-39: QoS - Diffserv Settings - Edit Class Element 58

Figure 5-40: QoS - Diffserv Settings - Edit Policy Element 59

Figure 5-41: QoS - Diffserv Port Binding 60

Figure 5-42: QoS - Bandwidth 60

Figure 5-43: Spanning Tree - Global Settings 61

Figure 5-44: Spanning Tree - STP Settings 62

Figure 5-45: Spanning Tree - STP Port Settings 63

Figure 5-46: Multicast - Global Settings 66

Figure 5-47: Multicast - Static Member Ports 67

Figure 5-48: Multicast - Static Router Ports 67

Figure 5-49: SNMP - Member Ports Query 68

Figure 5-50: Router Ports Query 68

Figure 5-51: Admin - User Authentication 69

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Figure 5-52: Admin - Forwarding Database 70

Figure 5-53: Admin - SNMP 71

Figure 5-54: Admin - Log 72

Figure 5-55: Admin - Log - Flash Logging 73

Figure 5-56: Admin - Log - Memory Logging 73

Figure 5-57: Admin - Port Mirroring 74

Figure 5-58: Admin - Cable Test 75

Figure 5-59: Admin - Ping 75

Figure 5-60: Admin - Save Configuration 76

Figure 5-61: Admin - Jumbo Frame 76

Figure 5-62: Admin - Firmware Upgrade 77

Figure 5-63: Admin - HTTP Upgrade 77

Figure 5-64: Admin - Reboot 78

Figure 5-65: Admin - Factory Defaults 78

Figure C-1: Interface 81

Figure C-2: Send File 81

Figure C-3: Browse 82

Figure C-4: Sending File 82

Chapter 1: Introduction

Welcome

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Chapter1:Introduction

Welcome

The Linksys WebView Managed Switch allows you to expand your network securely. Configuration of the switch

is secured using SSL for Web access. User control is secured using 802.1x security using a RADIUS

authentication mechanism and can also be controlled using MAC-based filtering.

Extensive QoS features makes the solution ideal for real-time applications like Voice and Video. The 4 priority

queues together with the Weighted Round Robin and Strict Priority scheduling techniques facilitate efficient co-

existence of real-time traffic with data traffic allowing them each to meet their QoS needs. Individual users or

applications can be prioritized above others using various Class of Service options - by port, layer 2 priority

(802.1p), and Layer 3 priority (TOS or DSCP). Intelligent Broadcast, and Multicast storm control minimizes and

contain the effect of these types of traffic on regular traffic. IGMP Snooping limits bandwidth-intensive video

traffic to only the requestors without flooding to all users. Incoming traffic can be policed and outgoing traffic can

be shaped allowing you to control network access and traffic flow.

There are features that allow you to expand and grow your network of switches. Link aggregation allows multiple

high-bandwidth trunks between switches to be setup. This also provides a level of reliability in that the system

continues to operate if one of the links break. Spanning Tree (STP), Fast Spanning Tree, and Rapid Spanning Tree

(RSTP) allow you to build a mesh of switches increasing the availability of the system.

The rich management functionality of the WebView switches includes SNMP, RMON, Telnet, and HTTP

Management options, allowing you to flexibly integrate and manage these devices in your network.

Other manuals for SRW2024P

Table of contents

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual