Linkstar LES-2000TD User manual
Instruction Manual
E-mail: [email protected]
Website: www.linkstarhk.com
LES-2000TD
For Android
For IOS
D) Specifications:
LM
2007_LES-2000TD_eng
3
E) Attention
型号Model no.：L3L1.5
1.Make sure the power is off after use.
2.Do NOT plug/unplug when the power is still connected.
3.Since there can be high voltage inside the unit, Do NOT open or repair the unit yourself. If
there is any defect, please contact an experienced technician.
4.Keep the environment dry and ventilated when using the product. Do not leave or use the
flash in humid or dusty environment.
5.For best performance of LEDs, maintain cleanliness of LEDS by wiping the surface softly
with clean cloth.
6.Do NOT apply pressure to the product.
7.Read this manual carefully before using the product.
Fig
13、
Fig
14、
3. Save function: 5 momery slots(A,B,C,D,E), save button and delete button are located at the
bottom of the apps
①
Save current setting to memory slots: choose the slots and then press save button.Recall
settings by press any memory slots for 2 seconds.
②Refer to Fig. 13, RED slot represents memory stored, BLUE represents slot memory is
recalling BLACK represent slots are free to store memory.
③Choose any memory slots then press delete button,
any stored data will be erased.
Ⅱ、
LED Display (Fig.14)
1. Turning the upper button to adjust Color Temperature of the light.
Pressing the upper button to switch between multi- light and
single-light mode(Press 3 s for multi-light mode, 6s for sing light-
mode)
2. Turning the lower button to adjust the brightness. Pressing the
lower button to enter or exit stand by mode.
3. Press the up and down arrows on the screen to adjust brightness
and color temperature respectively.
Model no.：
No. of LED bulbs
Power
Color Temperature
LUX（LUX)
LPS-200TD
1pcs
210w
3000K-8000K（Adjustable）Voltage AC 100-240V 50/60Hz
LCD Display
Weight
4 kg
√
3M(1310)/1M(12800 )
A) Product Overview
21
C) Brief instructions
Ⅰ、LPS-200TD
1. Please make sure the WiFi application is installed on mobile phone. You can download from our
website or scan the QR code on the first page of the manual to download the apps.
2. Plug in power cable . Switch on the light and the indicating light on the receiver should have
lighted up. Turn on the WiFi function on mobile phone and start to connect.
①Single Light mode: Search the WiFi network “LEDSxxxx” on your mobile phone and enter
password: candlehome to connect. Enter the WiFi app and the connected light should appear on
the control screen. (All RC-W01 receiver starts with the name LEDSxxxx and follow by 4 digits, e.g.
LEDS1234) (All receiver are pre-set with password : candlehome ro 12344321)
Fig
6、
Fig
7、
Fig
8、
Fig
9、
Fig
10、
Fig
11、
Fig
12、 ②
A router is needed for multi-lights connection. Enter WiFi connection of the smartphone
and connect to a password protected router as Fig6. Enter WiFi app and then 2nd control
screen as Fig7 and Fig8. Click to enter Router setting as Fig9. (IOS system to enter
router name first and then password). Please press the Reset button (CCT knob) at the back
of the LED light for 3 seconds. The RC-W01 indicating light will twinkle rapidly and please
release the button now. (Please also do the same procedure for other LED lights). After 5 - 20
seconds, the indicating light stops twinkling. Click on the WiFi app to search for the
connected lights as Fig10. (IOS system needs not to click the icon, connected lights will
be displayed automatically). Click the light ID to enter 3rd control screen for adjustment. For
Multi-lights adjustment, Click to choose specific lights as Fig10 or uppper icon to
choose all lights as Fig12. Then entering any one of the light to 3rd screen allows multi-lights
adjustment at one time. (Please start from the begining if connection fails.)
Fig1
、
Fig
2、
Fig
3、
Fig
4、
Fig
5、
Control panel
Connect LEDS5469 Enter password Enter 2nd screen Click ID to enter 3rd screen
Click ID to enter
3rd screen
Connect
LEDS5469 Enter 2nd screen Enter Router setting Enter password Light control screen Control screen
B) Panel Diagram
LES-2000TD series LED designed by is equipped with WiFi control function. With
the smartphone apps, users can adjust the color temperature and brightness of the
light via their smart phones.The aluminum housing provides strong protection to the
light. LED beads are with stable performance, long lifespans and HIGH CRI of
(~95Ra). Color temperature is adjustable from 3000K - 8000K and there is a touchable
LCD screen at the back for users to adjust color temperature and brightness directly.
Ⅰ、Light control panel
13
12
8
9
7
6
1.Indicating light
2.color temperature
3.AC Power socket
4.Fastening knob
5.Handle
6.Brightness
7.CCT knob / reset button
8.Brightness knob / Stand by button
9.Fuse
10.Switch
11. Lock Handle
12.Reflector Lock
13. Reflector
14.LED blubs
1
2
37
8
4
5
6
9
10
11
12
13
14
15
16
Ⅱ、WiFi Apps operation
1.Indicating light
2.ID of lights
3.Memory slot
4.Light switch
5.Brightness
6.Color Temp.
7.Save
8.Delete
9. Light Scan
10.Back
11.Color Temp. (3rd screen)
12.Color Temp. adjustment area
13.Pre-set color temp.
14.Router setting
15.Status display
16. Brightness control
14
1
3
4
5
2
10
11
Other Linkstar Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
