Lingmo Translate One2One User manual
On the SIM Operated
Device, press Lingmo
Earpiece to activate the
Translation App
Press ‘Translation
Between’ to select
languages
Scroll down to select
language to Translate
From by pressing a flag
Scroll down to select
language to Translate to
by pressing a flag
Confirm the language
selections are correct by
pressing the ‘ ‘
Add translation selection
to ‘Favourite’ for future
use
Using the two Translate One2One devices to have a
conversation (Data Connection required to use Translate One2One)
1
Press Voice to Voice to
open up new screen
depicting the flag in the
chosen languages
If Secondary device does not connect press
‘Connect’ on the Secondary Device screen
Once the flags are shown on the SIM Operated
Device press ‘One2One remote’ on the
Secondary Device and it will automatically
connect to the SIM Operated Device
The SIM Operated Device will depict the
primary language and the Secondary device
will show the other chosen language
2
Press the back button the Secondary device to
close the remote access
Press the Primary language flag and wait for the
beep and start speaking.
You have approximately 2 seconds to start the
conversation after you hear the beep.
Tap the screen to end recording
The translated conversation will come through
both earpieces
The spoken conversation will appear as text in
both languages on the Sim Operated Device
The secondary user can return the conversation
by pressing on their device after the beep and
tapping it again to finish the recording
The Microphone screen will appear on the SIM
Operated Device only
Features:
27 Languages powered by IBM Watson Artificial
Intelligence
•Average translation time is under 5 seconds
•Ability to make and receive calls
•Works on WiFi and/or Bluetooth
Back button
Power Button
Magnetic charging
point
Microphone
Receiver
SIM card
port
Ear cushion
Other manuals for Translate One2One
1
Other Lingmo Electronic Dictionary manuals
