LineEye SI-35USB User manual
[3000V High-voltage Resistant Isolation Type]
Interface Converter
USB ⇔Serial Conversion Model
Instruction Manual
SI-35USB / SI-35USB-2
The latest instruction manual is in the attached CD as PDF format.
(2nd edition)
Notice
Under the copyright laws, it is prohibited to reprint or duplicate any part or the whole
of this instruction manual without prior permission from LINEEYE CO., LTD.
(“LINEEYE”)
All company and product names in this manual are trademarks or registered trademarks
of their respective companies.
The contents of this manual and specifications of the products are subject to change
without any notice.
This manual has been designed and edited with great care to give you all necessary
information. If you have any questions, feel free to direct your inquiries to LINEEYE.
LINEEYE makes no warranty or guarantee, either expressed or implied with respect to
its quality, performance, merchantability, or tness for a particular purpose. LINEEYE
shall not be liable for direct, in-direct, special, incidental, or consequential damages
resulting from any defect in the product. The warranty and remedies set forth above are
exclusive and in lieu of all others.
Copyright © 2006-2017 LINEEYE CO., LTD. All right reserved.
Thank you for your purchase of SI series. To use it correctly, you are
advised to read and understand this instruction manual thoroughly. Keep
this together with the warranty.
Introduction
Be sure to read the following.
LINEEYE has developed and manufactured this product for purpose of using with
electrical devices such as a computer, a personal device, a measurement device,
semiconductor manufacturing equipment, a vending machine, a sequencer, display
equipment and so on. LINEEYE does not manufacture this product under the
purpose of using with equipment, which may cause malfunction to do harm to the
human body: control equipment for nuclear, aircraft equipment, life maintenance
equipment, traffic signals, etc. Therefore, LINEEYE makes no guarantee with
the mentioned-above use. If you use this product for the purposes mentioned
above, please contact LINEEYE considering safety like Fail Safe under your
responsibilities.
Danger Level
Warning
There is a possibility of getting a serious injury or a death if the
device is not used properly.
Caution
There is a possibility of getting an injury or material damage if
the device is not used properly.
* “Injury” indicates injury, burn, an electric shock, or the like which does not
require hospitalization or the extended hospital visit. “Material damage”
indicates damage related to a house, a building, furniture, apparatus, livestock
or a pet.
Safety Information
■ Do not disassemble or modify the converter .
This may cause overheating, a re, an electric shock, injury or unit malfunction.
■ Stop using the converter immediately when smoke, smells, or unusual sound emanates from
itself.
Continuous use may cause a burn, re, or electric shock.
■ Keep the products dry. Keep them away from water.
Failure to do so may cause overheating, an electric shock, or unit malfunction.
■ Do not insert the metal scrap or the rubbish such as lead wires into the opening.
Doing so may cause overheating, an electric shock, or unit malfunction.
■ Never touch the converter and AC adapter with wet hands.
Doing so may cause an electric shock.
■ Never use the converter in the place where an inammable gas leaks.
Doing so may cause ignition.
■ Do not conduct the installation or wiring work when power is applied.
Doing so may cause an electric shock or unit malfunction.
■ Do not use the damaged cables.
Doing so may cause re by overheating.
■ Do not install the converter in the unstable or vibrating place.
Doing so may cause unit malfunction or injury.
■ Do not install the converter in any temperature and humid places, or any places which has the
extreme temperature change.
Doing so may cause unit malfunction.
■ Do not install the converter in any places exposed to direct sunlight.
Doing so may cause a burn or unit malfunction by overheating.
■ Be sure not to short-circuit the pins on the connector.
Doing so may cause unit malfunction or injury.
■■■ Contents ■■■
Chapter 1 Before Using the Product ....................................................1
1-1. Overview ..........................................................................................................1
1-2. Specication .....................................................................................................1
1-3. Unpacking and Product Composition ...............................................................2
1-4. CD-ROM Included ...........................................................................................2
1-5. Mounting Arrangement ...................................................................................2
Chapter 2 Driver Installation and Usage..............................................4
2-1. Driver Installation for Windows 10/8.1/8/7 (32bit/64bit) ................................4
2-2. Manual Installation of the Driver for Windows ...............................................4
2-3. The Way to Conrm the Installed Driver ..........................................................7
2-4. Usage of Virtual COM Port Driver ...................................................................8
Chapter 3 Usage ..................................................................................9
3-1. Overview and Features .....................................................................................9
3-2. Panel Explanation ...........................................................................................10
3-3. Hardware Setup ..............................................................................................12
3-4 .Cable Connection ...........................................................................................14
Chapter 4 Warranty and After-sales Service .....................................16
4-1. Troubleshooting ..............................................................................................16
4.2. Loop-back Test by Communication Software ................................................16
4.3 Warranty and Repair ........................................................................................19
4.4. After-Sales Service .........................................................................................19
-1-
Chapter 1 Before Using the Product
1-1. Overview
This unit is an interface converter that converts PC’s USB port to an RS-422, or RS-485
port. A photo coupler and an isolation transformer electrically isolate the USB port from
the conversion port, which is ideal for FA equipment and medical equipment that require
high safety and reliability. It is able to access the USB port as a COM port using the
application software by virtual COM port driver.
1-2. Specication
Specications
SI-35USB-2 SI-35USB
Conversion USB ⇔RS-422/485
USB Interface USB1.1/2.0, full speed transmission B onnector
Serial Interface RS-422/485
5 pole terminal block (5.08mm press-to-screw pitch type*1) Rated torque/ Screw
size: 0.25Nm/M3
Built-in terminater ON/OFF.
Line monitor, Auto driver control.
Asynch Type Asynch
Baud Rate 300 to 3Mbps*2
Data Frame Data bits[7or8] + Parity[Even/Odd/none] + Stop bits[1/2]
Flow Control Xon/off, RTS/CTS*3 (supported by COM port emulator)
Surge Protection 15KV ESD
Isolation Protection 3000Vdc
System Requirements PC: PC/AT compatible with USB port (DOS/V PC)
OS:Microsoft Windows 10/8.1/8/7 *4
LED Transmission: TXD, Reception: RXD, Power: PWR
Power USB Bus power, DC5V±10%,
Max. 100mA
Temperature In operation: -20 to 60°C, In storage: -20 to 75°C
Humidity 10 to 90%RH (No condensation)
Standard CE (Class A), EMC (EN61326-1:2013) -
Dimension
& Weight
58(W)×80(D)×22.5(H)mm
Approx. 160g
65(W)×90(D)×22(H)mm
Approx. 200g
Mounting Method Attachement using M3 screw hole on the bottom face, installation to a DIN rail by
SI-DIN70, magnet attachment by SI-MG70, or wall-hanging by SI-WM1.
Composition USB cable (1.8m), Utility CD, Instruction manual, Warranty.
*1: Single wire: 0.2-2.5 mm2. Stranded wire: 0.2-1.5 mm2, AWG24 to 14. Refer to [3-4 Cable Connection] for more details.
*2: Speed is established in application software. Certain speed beyond 1.2Mbps cannot be established.
*3: Tuis unit can control the transmission timing by using the line monitor function (refer to [3-1])
*4: Supports 32bit/64bit of Windows 10/8.1/8/7. We do not support any problems occurred on Windows Vista/XP.
-2-
1-3. Unpacking and Product Composition
Make sure of the following when unpacking the product:
Converter : 1
USB cable : 1
Utility CD-ROM : 1
Instruction Manual : 1
Warranty : 1
Please let your LINEEYE distributor or LINEEYE know if you nd any damage to the
product caused by transportation, or if there are accessories lacking.
1-4. CD-ROM Included
This CD-ROM includes the document le such as the instruction manual, and driver for
Windows to connect it to the PC, and software for communication loop-back test. There
are two folders for Windows driver for your appropriate OS.
Folder name Supported OS
/siusb_drivers/new Windows 10/8.1/8/7
/siusb_drivers/old Windows Vista/XP (we conrmed the driver
works on these OSs but will not support them.)
1-5. Mounting Arrangement
Place this unit in the at and stable place. To mount it onto the other device, use the M3
screw holes in the bottom face. To mount it on a DIN rail (SI-DIN70 is required), use the
M3 screw holes and tight it together with DIN rail mounting plate (SI-DIN70).
Notice: Use the screws that can be inserted less than 6mm from the surface line.
If it is inserted deeper, it may damage the circuit.
-3-
With a wall bracket (SI-WM1, optional), you can x the converter to a wall by screwing
from the upper side of the bracket or hooking it to screws or nails hammered into the
wall.
Wall bracket (SI-WM1)
Two φ3.2 holes are for attaching this bracket on the backside of the converter,
other holes on each side of the bracket are for attaching on the wall.
Using the magnet to x
With the magnet (SI-MG70, optional), you can x the converter to a metal wall such as
steel wall. The magnet is attached to the converter by screwing the two magnet plates to
the bottom side of converter.
-4-
Chapter 2 Driver Installation and Usage
When connecting this converter to a USB port of the PC for the rst time, an installation
of the driver is necessary for the USB port.
If your PC has several USB ports, it is recommend using the specic USB port. Because
driver installation is necessary for each USB port to which you connect this converter for
the rst time.
2 - 1 . D r i v e r I n s t a l l a t i o n f o r Wi n d o w s 1 0 / 8 . 1 / 8 / 7 ( 3 2 b i t / 6 4 b i t )
When you connect the converter by USB cable with a PC which is connected with Inter-
net, automatically the driver will be installed.
Note: When the installation does not start automatically, use Windows Update and renew
the OS of the PC.
2-2. Manual Installation of the Driver for Windows
When the PC is not connected with Internet or the installation does not start automatically,
install the drivers in the CD-ROM (the USB driver and the virtual COM port driver).
Note: Only when you use it with Windows Vista or XP, use the drivers in the folder
￥siusb_drivers ￥old. (Please note that we do not support for Windows Vista and
XP.)
Note: Please do not connect the converter to the USB port and PC until the procedure6 is
completed.
1. Insert the attached CD-ROM into the CD-ROM Drive of PC.
2. Run “setup.exe” le in “/siusb_drivers/new” folder in the CD-ROM. The following
message appears, and then click “Yes” button.
-5-
3. Click “OK” to start install of the driver package.
4. Then the installation wizard runs. Click “Next” button.
Other manuals for SI-35USB
1
This manual suits for next models
1
Table of contents
Other LineEye Media Converter manuals
