Linde BOC EVOS VIPR User manual

1Introducing the F3VIPR

EVOS™VIPR Instructions for use.

Before Use

Check the cylinder and valve

for any damage before use and

restrain the cylinder so that it is

not able to rotate or fall.

Check the cylinder label to

ensure the correct gas has been

selectedfor the application.

Refer to Safety Data Sheet

at www.boc.com.au for

moreinformation.

Trundling knob

Do not lift cylinder by the

trundling knob or guard.

Flow control knob.

Live content indicator

shows full when pointer

in dark green zone at

30MPa, and slightly

below for products lled

to <30MPa.

Actuator lever.

Flow indicator

(not shown).

Safety interlock button.

5/8" Shielding gas

connection.

Outlet hose.

(

)

(

)

(

)

●

;

●

131 262 c[email protected] www.boc.com.au

BOC is a trading name of BOC Limited, a Linde company. © BOC Limited 2022 ABN95000029729. Reproduction without permission is strictly

prohibited. Details given in this document are believed to be correct at the time of printing 0522. Whilst proper care has been taken in the

preparation, no liability for injury or damage resulting from its improper use can be accepted. MP22-0400 FDAUS 26310

1. Remove light blue plastic cap from threaded valve

Connection (B). Connect the relevant outlet hose

connection(C). DO NOT OVER TIGHTEN.

2. To open the valve, press the blue safety interlock button

(D) and then slowly lift the actuator lever (E).



3. Slowly turn the ow control knob (F) in a clockwise

direction to increase gas ow to the desired level (litres per

minute) shown on indicator (G) at the notch. The EVOS ViPR is

ready to deliver gas.

1. To shut o󹟽 the valve slowly lower the actuator lever (E)

to its closed position, ensuring it engages with the safety

interlock mechanism (D).

2. Shut down the regulator by slowly turning the ow control

knob (F) in an anti-clockwise direction, until the indicator shows

OFF. DO NOT GO BELOW OFF OR APPLY EXCESSIVE TORQUE.

3. Disconnect the outlet hose connection (C) when the

cylinder is empty or a di󹟽erent gas is required. The cylinder

package is now safe to be stored or transported ahead of its

next intended use.

IMPORTANT SAFETY NOTE: Whether the cylinder is in use or not, it should be restrained to avoid rotation or tipping.

Start-up Shut-o󹠢





Other Linde Control Unit manuals

Linde

Linde R545 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual