Lightmybricks 75252 User manual

Please note: This page lists instructions for the LED light kit only.

Package Contents:

34x Cool White 30cm Bit Lights

3x Flashing White 30cm Bit Light

4x Flashing Red 30cm Bit Light

5x Cool White 30cm Large Bit Lights

20x Green 15cm Micro Bit Lights

11x White 30cm Micro Bit Lights

Effects and Expansion Boards

1x Pulse Effects Board

1x Gun Effects Board

1x Multi Effects Board

1x Flicker Effects Board

7x Micro 4-Port Expansion Boards

1x Micro 8-Port Expansion Boards

1x 2-Port Expansion Board

6x 6-Port Expansion Boards

1x 8-Port Expansion Boards

3x 12-Port Expansion Boards

Connecting Cables:

9x 5cm Connecting Cables

6x 15cm Connecting Cables

5x 30cm Connecting Cables

2x 50cm Connecting Cable 1x USB

Power Cable

LEGO Pieces:

28x Trans Clear Round Plate 1×1

4x Trans Light Blue Round Plate 1×1

1x Trans Clear Tile 1×2

1x Trans Black Cone 1×1 with Top Groove

1x Trans Clear Slope 30 1x1x2/3

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid

correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables;

instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be

inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on

the left side of the port. The connector side with the wires exposed should be facing toward the

soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do

not force it.

Incorrectly inserting the connector can can result in bent pins inside the port or possible

overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the

connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector,

don’t force it. Doing so will damage the plug and the connector.

Connecting Micro Cable connectors to Micro Expansion Board

Ports

Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards.

Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables

to Strip Lights. With the expansion board facing up, ensure the side of the connector with the

wires exposed is facing down. If a plug won’t fit easily into a port connector, do not force it. Use

your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow

LED component exposed). You can either place them directly on top of LEGO® studs or in

between.

OK, Let’s Begin!

1.) Start by disconnecting the following sections from the top of the ship.

Use your LEGO removal tool to disconnect the following pieces to allow us to remove the

two panels that make up the entire left section of the ship.

Table of contents

Other Lightmybricks Lighting Equipment manuals

Lightmybricks

Lightmybricks 21333 User manual

Lightmybricks

Lightmybricks LEGO Brick Bank 10251 Light Kit User manual

Lightmybricks

Lightmybricks 75326 User manual

Lightmybricks

Lightmybricks LEGO THE BATMAN-BATMOBILE 42127 User manual

Lightmybricks

Lightmybricks LEGO HOGWARTS CASTLE AND GROUNDS LIGHT KIT User manual

Lightmybricks

Lightmybricks LEGO FISH TANK User manual

Lightmybricks

Lightmybricks LEGO MINI DISNEY THE HAUNTED MANSION 40521 LIGHT... User manual

Lightmybricks

Lightmybricks LEGO 75277 User manual

Lightmybricks

Lightmybricks Downtown Diner Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO ORCHID 10311 LIGHT KIT User manual

Lightmybricks

Lightmybricks LEGO THE INSECT COLLECTION 21342 User manual

Lightmybricks

Lightmybricks LEGO ALPINE LODGE User manual

Lightmybricks

Lightmybricks LEGO JAZZ QUARTET 21344 User manual

Lightmybricks

Lightmybricks LEGO Hogwarts Castle 71043 Lighting Kit User manual

Lightmybricks

Lightmybricks LEGO STAR WARS UCS LUKE SKYWALKER'S... User manual

Lightmybricks

Lightmybricks 10265 User manual

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 User manual

Lightmybricks

Lightmybricks 71016 User manual

Lightmybricks

Lightmybricks LEGO Assembly Square 10255 User manual

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM User manual

Lightmybricks

Lightmybricks LEGO UCS OBI-WAN's JEDI STARFIGHTER 10215 LIGHT... User manual

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 User manual

Lightmybricks

Lightmybricks LEGO 1989 Batwing User manual

Lightmybricks

Lightmybricks 75306 User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions