After 3 seconds the status LED will turn red and there will be a haptic
pulse. Release the button within 2 seconds and the Switch will reboot.
If the button is not released within this period, the Switch will return to
its previous state, i.e. no reboot.
Alternatively and if the Switch is connected to your Wi-Fi, you can use
the LIFX app and go to Device Settings to perform this action.
To Factory Reset
OR First Time
Setup:
Important! The Switch is Factory Reset when Setup Mode is entered.
Please read the next row before proceeding.
Hold down all buttons.
After 10 seconds the status LED will flash green and there will be
a haptic pulse. This is indication that you’ve entered Setup Mode.
Now it’s time to Onboard your Switch to your Wi-Fi. Do so by doing
the following:
• Release the buttons and the Switch.The status LED will now flash
green to indicate it is discoverable.
• Open the app and select “Add New Device” and follow the
prompts to connect to the Wi-Fi network.
• Once the Switch has connected to the LIFX cloud, the status LED
will change to green and then turn oafter 60 secs.
If you’ve entered
Setup mode and
want to exit:
Continue holding all buttons down beyond the 10 second point
After 15 seconds the following will happen:
• Status LED will turn o
• Setup mode will be cancelled
To exit Setup
Mode:
Once in Setup Mode, press down all Switch buttons for 3 seconds.
The Switch will be Factory Reset and no longer be discoverable once
this is done.
Factory Reset
(alternative):
If the Switch is connected to a Wi-Fi network and is shown in the LIFX
app you can reset it from the Device Settings screen.
