TAKING A TEST
The fail screen means that your breath
sample has an alcohol level above the
predetermined level and you will be
unable to start your vehicle.
Your rst fail test will be followed by a
mandatory 2 - 15 minute (depending on
jurisdiction) temporary lockout.
Depending on the jurisdiction’s requirements,
one or more fails will result in a temporary
lockout. Additional lockouts will occur for
subsequent failures. The durations of these
lockouts are set by the jurisdiction. Be sure
to ask your monitoring authority about the
temporary lock out times for testing.
If during your test attempt you receive an
Abort screen you have not failed the test.
This just means that the device was unable
to analyze your breath sample. There are a
number of things that can cause an abort,
such as blowing too hard, blowing too softly,
not blowing long enough or not humming
properly. The device will present you with
an Abort screen detailing what the issue was.
Driving:
Once you have passed a test and are driving
your vehicle you will be required to take
a number of retests. Typically your rst retest
will be shortly after the vehicle is started and
at random intervals thereafter. In between
retests the devices screen will continuously
display “DRIVE SAFE”.
7
2031159-3_B1_GV_ L250 ClientHandbook_EN.indd 102031159-3_B1_GV_ L250 ClientHandbook_EN.indd 10 5/8/20 4:16 PM5/8/20 4:16 PM
