Getting Started
Follow these steps if you have a DAqM without a DRM. If you have a DRM, follow the steps on the DRM quick start guide.
Step 1: Install the Blueprint Utility
Go to www.licor.com/env/support/Biomet-System/software.html. Choose the software for your operating system, install it, and open the app.
Step 2: Load a biomet program
Click Biomet Library, select the program that corresponds with your sensor package. Enter the calibration information for your sensors. The program will tell you
which multipliers are needed. For custom programs, you can either modify an existing program or create one from scratch. Click Help for in-app assistance.
Step 3: Install wires and communication cables
9
8
7
6
5
4
3
2
1
11
10
9
8
7
6
5
4
3
2
1
9
8
7
6
5
4
3
2
1
Data Acquisition Module
SmartFlux
System
Network
Switch
To
Computer
or Network
Black
Yellow
White/Yellow
Green
White/Green
Wire Color SmartFlux Terminal
Signal Return (5)
TX+ (6)
TX- (7)
RX+ (8)
RX- (9)
DAqM Terminal
RTN
RX+
RX-
TX+
TX-
Bundles of wire leads connect the DAqM to the SmartFlux 2 or
3 System. A standard Ethernet cable connects the SmartFlux
System to your network or computer. A detailed wiring dia-
gram is provided in the Data Acquisition System instruction
manual.
Step 4: Power on the system
Each part needs to be powered on (+9 to 30 VDC).
Step 5: Connect and send the program
Click Connect in the Blueprint Utility. Select the SmartFlux Sys-
tem from the list. It is identified by the serial number. Click
Configure Port and select the port that the DAqM is con-
nected to. Click OK to connect. Click Push to load the program. Additional steps must be taken to configure SDI-12 sensors and to connect the DAqM to your
eddy covariance system. Refer to the data acquisition system instruction manual for details.
Global Headquarters
Lincoln, Nebraska, USA
Intl.: +1-402-467-3576
envsupport@licor.com
Outside the United States– Regional Offices
and Distributors
www.licor.com/env/contact
Windows® is a trademark of Microsoft, Inc. macOS® is a trademark of
Apple, Inc., registered in the US and other countries.
©2019 LI-COR, Inc. All rights reserved.
984-17496•04/19
