LG SK3E User manual
MODEL
SK3E (SK3E, SPH4B-W)
Please read this manual carefully before operating
your set and retain it for future reference.
OWNER’S MANUAL
Wireless
Sound Bar
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
1808_Rev01
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Getting Started 3
Getting Started
1
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specication page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or re. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
For models using an adapter
Only use the AC adapter supplied with this device.
Do not use a power supply from another device or
another manufacturer. Using any other power cable
or power supply may cause damage to the device
and void your warranty.
Getting Started4
Getting Started
1
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
7 Remote control
8 Front panel
8 Rear panel
9 About LED condition
11 Installing the sound bar
2 Connecting
12 Connecting the AC Adapter
12 Wireless subwoofer connection
14 Connecting to your TV
14 – Using an OPTICAL cable
14 – LG Sound Sync
16 Optional equipment connection
16 – OPTICAL IN connection
17 – USB connection
17 – Compatible USB devices
17 – USB device requirement
18 – Playable file
3 Operating
19 Basic operations
19 – USB operation
19 Other operations
19 – Turn off the sound temporarily
19 – Using your TV remote control
20 – Auto display Dimmer
20 – Auto power down
20 – AUTO POWER On/Off
21 – Auto function change
22 Using BLUETOOTH® technology
22 – Listening to music stored on the
BLUETOOTH devices
23 – BLUETOOTH connection lock (BT lock)
24 Using BLUETOOTH App
24 – Install “Music Flow Bluetooth” App onto
Your BLUETOOTH Device
24 – Activate BLUETOOTH with “Music Flow
Bluetooth” App
26 Sound adjustment
26 – Setting sound effect
26 – Adjust the woofer level settings
26 – Night mode
4 Troubleshooting
27 Troubleshooting
27 – General
28 – NOTES to use wireless
5 Appendix
29 Trademarks and licenses
30 Specifications
31 Maintenance
31 – Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit will turn off by itself for energy saving
consumption.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
BLUETOOTH®
Listen to music stored on your Bluetooth device.
USB playback
Listen to music stored on your USB device.
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Getting Started 7
Getting Started
1
Remote control
Replacement of Battery
Remove the battery cover on the rear of the remote
control, and insert the battery with and
matched correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
F (Function) : Selects the function and the input
source.
ASC : Analyzes the property of input sound and
provides the sound optimized for the content in real
time.
(Mute) : Mutes the sound.
VOL (Volume) o/p: Adjusts speaker volume.
BASS BLAST : Reinforces the bass and powerful
sound.
CINEMA : Selects cinematic surround sound.
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
C/V (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a le.
dM (Play/Pause) : Starts playback. / Pauses
playback.
NIGHT ON/OFF :
- Turns on or off Night mode.
- Controls this unit using TV remote. (Page 19)
WOOFER LEVEL o/p: Adjusts sound level of
subwoofer.
AUTO POWER ON/OFF :
- Turns on or off AUTO POWER function. (Page 20)
- Turns on or off the Bluetooth connection lock.
(Page 23)
Getting Started8
Getting Started
1
A Remote sensor
B Standby LED (Red)
C Function LED (White)
D The buttons are located on the rear.
Front panel
Ao/p (Volume) : Adjusts volume level
F (Function) : Selects the function and input
source.
1/! (Standby/On)
BDC IN : AC adapter input
COPTICAL IN : Optical input
DUSB /: Connect to a USB device
Rear panel
Getting Started 9
Getting Started
1
About LED condition
: LED is staying on. : LED is blinking. : LED is off.
LED Condition Description
OPTICAL LED turns on. OPTICAL function is selected.
OPTICAL LED blinks twice and
turns on.
LG Sound Sync (Optical) function is
selected.
USB LED turns on. USB function is selected.
USB LED blinks. Paused USB playback.
BT (Bluetooth) LED turns on. Paired with Bluetooth device.
BT (Bluetooth) LED blinks. Waiting for Bluetooth connection.
LG TV LED turns on. LG Sound Sync (Wireless) function is
selected.
yWhen you press any button, standby LED (Red) on the main unit blinks.
yWhen you press (Mute) button, standby LED (Red) blinks slowly.
yWhen this unit reaches minimum volume, standby LED (Red) turns on for 2 seconds and blinks slowly.
yWhen this unit reaches maximum volume, standby LED (Red) turns on for 2 seconds.
yWhen you press volume (o/p) button continually, standby LED (Red) blinks quickly.
,
Note
Getting Started10
Getting Started
1
Useful functions for using the unit
Function Description To do Do this
TV Remote On/
Off
(Page 19)
It allows you to control the
volume of this unit by your TV
remote control even by other
company’s product.
Initial setting of this function
was set to on.
ON Press and hold NIGHT ON on the remote
control for about 2 seconds.
The standby LED (Red) blinks once.
OFF Press and hold NIGHT OFF on the remote
control for about 2 seconds.
The standby LED (Red) blinks once.
BT Lock On/Off
(Page 23)
It allows you to connect a
Bluetooth deivce only on
Bluetooth and LG TV functions.
Initial setting of this function
was set to off.
ON Press and hold AUTO POWER ON on the
remote control for about 2 seconds in
Bluetooth function.
The standby LED (Red) blinks once.
OFF Press and hold AUTO POWER OFF on
the remote control for about 2 seconds in
Bluetooth function.
The standby LED (Red) blinks once.
Auto Power
On/Off
(Page 20)
It allows the unit to turn on
and off automatically by input
signals :
Optical, LG TV or Bluetooth.
Initial setting of this function
was set to on.
ON Press AUTO POWER ON on the remote
control.
The standby LED (Red) blinks once.
OFF Press AUTO POWER OFF on the remote
control.
The standby LED (Red) blinks once.
This manual suits for next models
1
Table of contents
Other LG Speakers System manuals
