LG LAS160B User manual
OWNER’S MANUAL
Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LAS160B
*MFL69342301* www.lg.com
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product shall not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they should be placed
upon a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch
circuits. Check the specication page of this owner’s
manual to be certain. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock
or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery from the
equipment: Remove the old battery or battery pack,
follow the steps in reverse order than the assembly.
To prevent contamination of the environment and
bring on possible threat to human and animal health,
the old battery or the battery put it in the
appropriate container at designated collection points.
Do not dispose of batteries or battery together with
other waste. It is recommended that you use local,
free reimbursement systems batteries and
accumulators. The battery should not be exposed to
excessive heat such as sunshine, re or the like.
Getting Started4
Getting Started
1
Disposal of your old appliance
1. All electrical and electronic products shall
be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
2. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
3. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.
Disposal of waste batteries/accumulators
Pb
1. This symbol may be combined with chemical symbols
for mercury(Hg), cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005% of mercury,
0.002% of cadmium or 0.004% of lead.
2. All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old batteries/
accumulators will help to prevent potential negative
consequences for the environment, animal and
human health.
4. For more detailed information about disposal of your
old batteries/ accumulators, please contact your city
office, waste disposal service or the shop where you
purchased the product.
Declaration of Conformity
Hereby, LG Electronics European Shared Service Center
B.V., declares that this Sound Bar is compliant with the
essential requirements and other relevant provisions of
Directive 1999/5/EC. The complete Declaration of
Conformity may be requested through the following
postal address:
LG Electronics European Shared Service Center B.V.
European Standard Team
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz wideband transmission system,
intended for use in all EU member states and EFTA
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 – Auto power down
6 Introduction
6 – Symbols used in this manual
6 Accessories
7 Remote control
8 Front panel
9 Rear panel
2 Connecting
10 Installing the sound bar
11 Connecting to your TV
11 – Using an OPTICAL cable
11 Optional equipment connection
11 – OPTICAL IN connection
3 Operating
12 Operations
12 – DRC (Dynamic range control)
12 – Turn off the sound temporarily
12 – Using your TV remote control
13 – AUTO POWER On/Off
13 – Auto function change
14 Using BLUETOOTH® technology
14 – Listening to music stored on the
BLUETOOTH devices
15 Sound adjustment
4 Troubleshooting
16 Troubleshooting
17 NOTES to use wireless
5 Appendix
18 Trademarks and licenses
19 Specifications
20 Maintenance
20 – Handling the unit
Getting Started6
Getting Started
1
Unique features
Auto power down
This unit supports to turn off by itself for saving
energy consumption.
Introduction
Symbols used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
Remote control (1) Batteries (2)
Getting Started 7
Getting Started
1
Remote control
Replacement of battery
Remove the battery cover on the rear of the Remote
Control, and insert two (size AAA) batteries with
and matched correctly.
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1 (Power): Switches the unit ON or OFF.
F : Changes input sources.
STANDARD : Selects STANDARD sound effect.
VOICE : Selects VOICE sound effect.
CINEMA : Selects CINEMA sound effect.
(Mute) : Mutes the sound.
VOL o/p: Adjusts speaker volume.
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
DRC ON/OFF : Turns on or off DRC function. (Refer
to the page 12.)
AUTO POWER ON/OFF: Turns on or off AUTO
POWER function. (Refer to the page 13.)
?: This button is not used.
Getting Started8
Getting Started
1
AF (Function)
Selects the function and input source.
Bp/o (Volume)
Adjusts volume level.
C1(Standby/On)
DRemote sensor
EFunction LED
yYou can check current function through
the LED.
yThis unit turns off LED If there is no key
input for 20 seconds. To display LED,
press any button.
yStandby LED quickly blinks when you
press any button.
yBluetooth LED blinks when you select
Bluetooth function. if you connect
Bluetooth device, LED will turn on.
, Note
FMUTE LED
GAUTO POWER LED
HStandby LED
It lights up in red on standby mode.
Precautions in using the touch buttons
yUse the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before using.
yDo not press the touch buttons hard to make
it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yTouch the button that you want to work in
order to operate the function correctly.
yBe careful not to have any conductive
material such as metallic object on the touch
buttons. It can cause malfunctions.
, Note
Front panel
ABC
DEHFG
Getting Started 9
Getting Started
1
Rear panel
AOPT. IN : Optical input
A
2 Connecting
Connecting10
Connecting
2
Installing the sound bar
You can hear the sound by connecting the unit to the
other device : TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
device you want. (Refer to page 11.)
For best performance of wireless connection
such as Bluetooth, do not install the unit on
Metallic furniture because wireless connection
communicates through a module positioned on
the bottom of the unit.
> Caution
Other manuals for LAS160B
4
Table of contents
Other LG Speakers System manuals
