LG 34UM67 User manual
www.lg.com
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
29UM67
34UM67
2
ENG
ENGLISH
Contents
CONTENTS
22 USER SETTINGS
23 Customizing settings
23 - Menu Settings
23 - -Quick Settings
24 - -PBP
25 - -Picture
27 - -Sound
28 - -General
29 - -Reset
30 TROUBLESHOOTING
32 SPECIFICATIONS
32 29UM67
33 34UM67
34 Factory support mode
(DVI-D/ HDMI/ DisplayPort)
34 HDMI Timing (Video)
34 Indicator
35 PROPER POSTURE
35 Proper Posture for Using the Monitor
3LICENSE
4ASSEMBLING AND
PREPARING
4Product Components
5Component and Button Description
6- How to Use the Joystick Button
7Moving and Lifting the Monitor
8Installing the Monitor
8- Assembling the stand base
10 - Using the cable holder
11 - Installing onto a table
12 - Adjusting the angle
13 - Using the Kensington lock
13 - Installing the wall mount plate
14 - Installing to a wall
15 USING THE MONITOR
15 Connecting to a PC
15 - DVI connection
16 - DisplayPort connection
16 - HDMI connection
17 Connecting to AV Devices
17 - HDMI connection
17 Connecting to External Devices
17 - Connecting Headphones
18 INSTALLING THE LG
MONITOR SOFTWARE
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, Display Port Compliance Logo and Display Port
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
yThe DisplayPort cable may not be available in some areas.
CAUTION
NOTE
CD(Owner's Manual) /
Card
OPTIONAL ACCESSORIES
The DisplayPort cable may not be
available in some areas.
Display Port Cable
Stand Base Stand Body
HDMI Cable
( This cable is not in-
cluded in all countries. )
( Depending on the country ) ( Depending on
the country )
Power Cord AC-DC Adapter AC-DC Adapter
or
DVI-D Dual Cable
( This cable is not included in
all countries. )
Stand Base
Screws Screws Cable HolderCable Holder
Clear sheet
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Component and Button Description
Power Indicator
yOn: power is on
yOff: power is off
Joystick Button
Input Connector
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the
monitor.
Power off Press and hold the joystick button once with your finger to turn off
the monitor.
◄/►Volume
Control You can control the volume by moving the joystick button left/right.
yThe joystick button is located at the bottom of the monitor.
NOTE
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
yIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Applying excessive force when tightening
the screws may cause damage to the moni-
tor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be
careful.
CAUTION
Installing the Monitor
Assembling the stand base
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2First, please insert Stand Body to Stand Base,
Then tighten two screws into the back of the
stand base.
1Place the screen face down.
29UM67
4Tighten two screws into the back of the stand
body .
3Check the direction of the stand body
(front, back) and then mount the stand
body onto the stand hinge.
Stand Body
Stand Body
Stand Base
(Silver)
(Black)
or
120 mm
100 mm
(Black)
Stand Hinge
yYou can disassemble the stand in the
reverse order of the assembly.
NOTE
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
1 Place the screen face down.
Stand Hinge
yTo protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
2 Mount the stand base onto the stand hinge as
shown in the illustration. Fix two screws into
the back of the stand base and close the screw
cover.
Stand Base
120 mm
Screw Cover
or
100 mm
yThe stand height is adjustable by 20 mm
yWhen tightening the screws after mounting
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Other-
wise, the product may fall, causing personal
injury or damage to the product.
yBe careful not to hurt your hand on the edges
of the screw covers.
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
yIf you use the monitor panel without the
stand base, its joystick button may cause the
monitor to become unstable and fall, result-
ing in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
CAUTION
34UM67
yYou can disassemble the stand in the
reverse order of the assembly.
NOTE
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the cable holder
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yApplying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
yBe careful not to hurt your hand on the edges
of the screw covers.
yDo not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
CAUTION
29UM67
1First, as shown in the illustration,push the
cable holder on the stand body, Second ,Fix
the cable holder to stand body.
2Put the cables into the cable holder.
Stand Body
Tidy up cables using the cable holder on the stand base as
shown in the illustration.
34UM67
yCables can get caught in the hinge area as
shown in the illustration, so be careful when
organizing cables.
NOTE
This manual suits for next models
2
Table of contents
Other LG Monitor manuals
