LG 24BR750C User manual
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
24BR750C
27BR750C
24BR650B
27BR650B
OWNER’S MANUAL
LED LCD MONITOR
(LED Monitor*)
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
LICENSE
Each model has different licenses.Visit www.lg.com for more information on the license.
The terms HDMI, HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.
The SuperSpeed USB Trident logo is a registered trademark of USB
Implementers Forum, Inc.
TABLE OF CONTENTS
LICENSE ...................................................... 2
OPEN SOURCE SOFTWARE NOTICE
INFORMATION ............................................ 3
ASSEMBLING AND PREPARING .................. 3
USING THE MONITOR................................ 13
USER SETTINGS ........................................ 16
TROUBLESHOOTING ................................. 26
PRODUCT SPECIFICATION......................... 28
3
ENGLISH
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses that have the obligations to
disclose source code, that is contained in this product, and to access all referred license terms, copyright notices
and other relevant documents please visithttps://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request toopensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three yearsafter our last shipment of this
product.
ASSEMBLING AND PREPARING
CAUTION
•Always use genuine LG components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of unauthorized components.
•It is recommended that use the supplied components.
•If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•Illustrations in this document represent typical procedures, so they may look different from the actual product.
•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Do not carry the monitor upside down by just holding the base.This may cause the monitor to fall off the stand
and could result in personal injury.
•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•The components may look different from those illustrated here.
•Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•The power cord provided may differ depending upon the region.
Supported Drivers and Software
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
4
ENGLISH
Product and Button Description
24BR750C/27BR750C
Joystick Button
1
4 4
2
3
Front Adjust Button Functions Information
1Webcam 3Webcam activity status indicator
2IR LED 4MIC
Webcam activity status indicator
Mode LED Color
Webcam enabled Blue
Webcam disabled Off
NOTE
•The joystick button is located on the right back of the monitor.
5
ENGLISH
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
Basic Functions
Power on Press the joystick button once with your finger
to turn on the monitor.
Power off
Press and hold the joystick button once more
than 3 seconds with your finger to turn off the
monitor.
/ Volume control You can control the volume by moving the
joystick button left/right.
NOTE
•The direction of the button changes with the direction of the display.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•Place the monitor in the original box or packing material before attempting to move it.
•Before moving or lifting the monitor, disconnect the power cord and all other cables.
•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•When holding the monitor, the screen should face away from you to prevent it from being scratched.
•When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
•Avoid touching the monitor screen as much as possible.
-This may result in damage to the screen or some of the pixels used to create images.
•If you use the monitor panel without the stand base, its button may cause the monitor to become unstable and
fall, resulting in damage to the monitor or human injury. In addition, this may cause the button to malfunction.
6
ENGLISH
Adjusting the Stand Height
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
Max. 130.0 mm
WARNING
•Do not put your fingers or hand between the screen and the base (chassis) when adjusting the screen's height.
Installing on a Table
•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from
the wall to ensure sufficient ventilation.
100 mm
100 mm
100 mm
100 mm
CAUTION
•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
7
ENGLISH
Adjusting the Angle
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 25° for a comfortable viewing
experience.
25 °-5°
WARNING
•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•Be careful not to touch or press the screen area when adjusting the angle of the monitor.
Pivot Feature
The pivot feature allows the monitor to rotate 90° clockwise and -90° counter clockwise.
1 Raise the monitor to the maximum height.
2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
Rear Side Front Side
8
ENGLISH
3 Rotate the monitor 90° clockwise and -90° counter clockwise as shown in the figure.
4 Complete the installation by rotating the monitor 90° clockwise and -90° counter clockwise as shown below.
NOTE
•Auto Pivot feature of the display is not supported.
•The screen can be rotated easily using the screenpivot shortcut key provided with your Windows operating
system. Note that someWindows versions and some graphics card drivers may use different settings for the
screen pivot key or may not support the pivot key at all.
•Windows screen pivot shortcut keys
-0°: Ctrl + Alt + Up arrow key (↑)
-90°: Ctrl + Alt + Left arrow key (←)
-180°: Ctrl + Alt + Down arrow key (↓)
-270°: Ctrl + Alt + Right arrow key (→)
WARNING
•To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand
does not make contact with the monitor.
Head
Head
Stand
Stand
9
ENGLISH
WARNING
•Take care when rotating the monitor if the cable is connected.
•To avoid injury when rotating the display, do not place your fingers between the display and the stand base.
Swivel stand
•Image shown may differ from your Monitor set.
1 Swivel 60 degrees and adjust the angle of the Monitor set to suit your view.
10
ENGLISH
Using the cable holder
Arrange the cables using the cable holder as shown in the illustration.
Rotate Set(Pivot) and put connectors. It is easy to put connectors and manage cables using cable holder.
Using the Kensington Lock
The connector for the Kensington security system is located at the back of the monitor.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
Other manuals for 24BR750C
1
This manual suits for next models
4
Table of contents
Other LG Monitor manuals
