LG 23ET63V User manual
www.lg.com
OWNER’S MANUAL
LED MONITOR
(LED TOUCH MONITOR)
23ET63V
Please read this manual carefully before operating
your set and retain it for future reference.
LED MONITOR(LED TOUCH MONITOR) MODEL LIST
ENGLISH
WARNING: This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
2
ENG
ENGLISH
TABLE OF CONTENTS
CONTENTS
3 LICENSE
4 ASSEMBLINGANDPREPAR-
ING
4 Unpacking
5 Parts and buttons
6 Moving and Lifting the Monitor
6 Setting up the Monitor
6 - Mounting on a table
8 - Mounting on a wall
9 USINGTHEMONITOR
9 Connecting to a PC
9 - D-SUB connection
9 - HDMI connection
11 - USB cable-PC connection
11 - Headphone port connection
12 CUSTOMIZINGSETTINGS
13 Customizing Settings
13 - Menu Settings
14 - Picture
15 - Color
16 - Display
16 - Audio
17 - Others
18 SUPER ENERGY SAVING
19 Picture Mode
20 TROUBLESHOOTING
23 SPECIFICATIONS
24 Preset Modes (Resolution)
24 HDMI TIMING
24 Indicator
25 PROPERPOSTURE
25 Proper Posture for Using the Monitor
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
* Touch does not respond when the desktop is extended to a second touch monitor. For more information.(See p.22)
NOTE
Only support Windows 7 and Windows 8 system.
Windows 7 Starter, Home basic version are not support multi-touch as default option.
Please check the details on the homepage of the Microsoft.
Multi touch does not work.
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
Power Cord
Rubber(white)
CD(Owner's Manual) /
Card
D-SUB Cable
(This cable is not included in
all countries.)
( Depending on the country )
AC-DC Adapter
AC-DC Adapter
( Depending on the country )
or
A-B Type USB 2.0 Cable
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
yDo not use any unapproved accessories to ensure the safety and product life span.
yAny damages or injuries by using unapproved accessories are not covered by the warranty.
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
CAUTION
NOTE
5
ENG
ENGLISH
ASSEMBLING AND PREPARING
Partsandbuttons
PowerIndicator
LightingOn:Turnedon(Red)
LightingOff:Turnedoff
Connection panel
Button
(Power Button)
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
SettinguptheMonitor
Mountingonatable
1 Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
MovingandLiftingtheMonitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
As much as possible, avoid touching the
monitor screen. This may result in damage
to the screen or some of the pixels used to
create images.
CAUTION
It is advisable to place the monitor in the
original box or packing material before
attempting to move it.
Before moving or lifting the monitor, discon-
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
When holding the monitor, the screen should
face away from you to prevent it being
scratched.
When moving the monitor, avoid any strong
shock or vibrations to the product.
When moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
or
10 cm
10 cm
10 cm
10 cm
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
3 Press the (Power) button on the front panel
to turn the power on.
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
CAUTION
NOTE
Front Rear
Tilt from 15 to 58 degrees up or down to
adjust the angle of the Monitor set to suit
your view.
Avoid using the product in a high
temperature and high humidity area. Moving
the monitor from a environment like this to
an air conditioned area may cause moisture
formation inside the glass. This moisture
will be dissipate over time, which may vary
depending on the operating environment.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the Monitor set and a table.
The Kensington security system is optional.
You can obtain it from most electronics stores.
NOTE
Do not touch or press the screen when
adjusting the angle of the monitor.
WARNING
To avoid injury to the fingers when adjusting
the screen, do not hold the upper part of the
stand as shown below.
WARNING
Attach the rubber like the below picture.
If not, the fingers can be pinched or get
damaged.
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mountingonawall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1 Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2 If you use screw longer than standard, the
monitor might be damaged internally.
3 If you use improper screw, the product might be
damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
it.
4 VESA compatible.
5 Please use VESA standard as below.
784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad
and screws.
10 cm
10 cm
10 cm
10 cm
Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit will include an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
instructions supplied with the wall mount.
CAUTION
NOTE
Model 23ET63V
VESA(AxB) 75 x 75
Standardscrew M4
Numberofscrews 4
9
ENG
ENGLISH
USING THE MONITOR
USINGTHEMONITOR
ConnectingtoaPC
Your Monitor supports Plug & Play. When
connected to a PC and turned on, the device will
connect automatically without configuration or
user intervention.
D-SUBconnection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor with
the supplied D-sub 15 pin signal cable as shown in
the following illustrations.
This monitor support PC input via HDMI,
but you may experience some compatibility
issues.
NOTE
HDMIconnection
Transmits the digital video and audio signals from
your PC or A/V to the Monitor. Connect the PC or
A/V and the Monitor with the HDMI cable as shown
in the following illustrations.
Macadapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
When using a D-Sub signal input cable
connector for Macintosh
NOTE
(soldseparately)
Table of contents
Other LG Monitor manuals
