LEVTECH LSP-TSTS User manual
User Manual
Lueta Nr. 319, Romania
+40758576007
www.levtech.ro
Temperature transmitter
for Pt100 or Pt1000
LSP-TSTS
PREFACE..................................................................................................................... 3
Document Revisions .....................................................................................................4
Approvals......................................................................................................................4
1. INTRODUCTION.......................................................................................................5
1.1. General Information .................................................................................... 5
1.2. Support and Services...................................................................................5
1.3. Disposal Remarks........................................................................................5
2. SAFETY INSTRUCTIONS.........................................................................................6
2.1.Symbols....................................................................................................... 6
2.2. Receipt and unpacking.................................................................................6
2.3. Environment................................................................................................ 6
2.4. Mounting......................................................................................................6
2.5. Cleaning ......................................................................................................7
3. DESCRIPTION..........................................................................................................8
4. FEATURES ...............................................................................................................8
5. INSTALLATION AND WIRING ...................................................................................9
5.1. Installation on TS-35 DIN Rail.......................................................................9
5.2. Connections with Screw Terminals...............................................................9
6. SPECIFICATIONS .................................................................................................. 10
7. CONFIGURATION TYPE AND ORDER CODE........................................................ 10
8. DIMENSIONS......................................................................................................... .11
9. TERMINAL DESIGNATION......................................................................................11
10. ELECTRICAL DIAGRAMS.....................................................................................12
11. APPLICATIONS..................................................................................................... 13
12. OPERATION AND MAINTENANCE......................................................................14
12.1. Operation................................................................................................. 14
12.2. Maintenance ............................................................................................14
13. WARRANTY DISCLAIMER .................................................................................. 14
14. CONTACT INFORMATION ....................................................................................15
Table of Contents
3
PREFACE
Thank you for selecting our product!
This User Manual contains information needed for proper installation, operation, and
maintenance of your product. A thorough understanding of these simple instructions will
help you get the most of your product.
This document should be read thoroughly, and the safety instructions described in this
manual should be followed carefully. If you have questions or concerns about the
operation and maintenance of this product, please contact our customer support.
If a problem arise with the product, check if you followed the installation steps
correctly. If the problem persists, contact an authorized Levtech dealer or our customer
support.
All information in this User Manual is based on the latest product information available at
the time of printing approval. Levtech reserves the right to make changes at any time
without notice and without incurring any obligation.
Please always keep this manual together with the isolator as a reference to everyone
who uses this product.
4
Approvals
This document requires following approvals:
Date
Version Number
Document Changes
11-03-2021
1.0
Initial draft
13-04-2021
2.0
Overall improvements
15-04-2021
3.0
Application examples added
Name
Title
Levi Mihaly
General Manager
Document Revisions
13-05-2021
4.0
Wiring diagram added
5
1.1.
General Information
1.2.
Support and Services
1.3.
Disposal Remarks
Lueta Nr. 319, Romania
+40758576007
www.levtech.ro
1.
INTRODUCTION
This manual is the designated User Manual for the installation, safe operation, and
maintenance of your product. It is divided into nine chapters covering general
information, safety instructions, how to safely install and operate the product,
maintenance, warranty, and contact information.
All personnel involved in the installation, operation, and maintenance of this equipment
should read and understand this manual, particularly its safety instructions. Substandard
performance and longevity, property damage, and personal injury may result from not
knowing and following these instructions.
In order to ensure long product life, Levtech recommends that you utilize the product and
perform maintenance by correctly following the instructions described in this guide. The
manufacturer’s warranty does not cover any damage resulting from the neglect of these
instructions.
Levtech assumes no liability for damage caused by operation contrary to what is
specified in this operating manual.
For information about further questions that are not answer in this manual, additional
materials, and support, please contact:
DO NOT dispose of the product with domestic waste!
Electronic devices have to be disposed of according to the regional directives on
electronic and electric waste disposal. In case of further questions, please consult your
supplier. The supplier may take care of proper disposal.
6
2.2.
Receipt and unpacking
2.3.
Environment
2.4.
Mounting
2.
2.1.
Symbols
WARNING
CAUTION
NOTICE
This symbol indicates information that, if ignored, could result possibly in
personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result in
personal injury or physical damage due to incorrect handling.
Indicates information considered important, but not hazard-related.
Unpack the device without damaging it and check whether the device type corresponds
to the one ordered. The packing should always follow the device until this has been
permanently mounted.
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, and rain
and heavy moisture.
Only technicians who are familiar with the technical terms, warnings, and
instructions in the manual and who are able to follow these should connect the
device.
Mounting and connection of the device should comply with national legislation for
mounting of electric materials, i.e. wire cross section, protective fuse, and location.
Descriptions of input / output and supply connections are shown in this installation
guide and on the side label.
Use this device only in accordance with this instruction manual, as well as all
applicable local and national laws and regulations. Only allow this device to be
installed, operated, maintained, repaired, etc. by others who have also read and
understood the user manual.
Do not allow minors, untrained personnel, or personnel suffering from physical or
mental impairment that would affect their ability to follow this manual to install,
operate, maintain, or repair this device.
Any untrained personnel who might be near the device while it is in operation
MUST be informed that it is dangerous and fully instructed on how to avoid injury
during its use.
SAFETY INSTRUCTIONS
7
WARNING
CAUTION
2.5.
Cleaning
WARNING
To avoid the risk of electric shock and fire, the safety instructions of this guide
must be observed and the guidelines followed.
When disconnected, the device may be cleaned with a cloth moistened with distilled
water.
The specifications must not be exceeded, and the device must only be applied
as described in the following.
Do not use the device near water or moisture.
Do not install near any heat sources such as radiators, stoves or other heaters
that produce heat.
To prevent ignition of the explosive atmospheres, disconnect power before
servicing and do not separate connectors when energized and an explosive
gas mixture is present.
Do not mount or remove devices from the power rail when an explosive gas
mixture is present.
Before the commissioning of the device, this installation guide must be
examined carefully, and only qualified personnel (technicians) should install
this device.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
To avoid the risk of explosion due to electrostatic charging of the enclosure, do
not handle the units unless the area is known to be safe, or appropriate safety
measures are taken to avoid electrostatic discharge.
8
4.
FEATURES
RTD type Pt100 or Pt1000 Input
4 to 20 mA output on current loop
TS-35 DIN rail mounng
+/-0.1% accuracy
Ip40 case
Screw terminals
Easy to use
Supply from current loop
Made in EU
This temperature transmitter is designed to provide a linearised 4-20mA current loop
signal output, proportional with the temperature characteristic of the temperature sensor
connected on its input. On the input it is possible to connect both 3 wires and 2 wires
Pt100 or Pt1000 sensors. This transmitter is suitable for any industrial application and
with its DIN rail mountable enclosure it is easy to instal in electrical cabinets. The
transmitter acquires its supply voltage from the current loop and no additional power
supply needed. The temperature range can be modified only in the factory and it has to
be ordered for a specific range. The default temperature range is -15C to 150C.
3.
DESCRIPTION
5.2.
Connections with Screw Terminals
5.1.
Installation on TS-35 DIN Rail
Inserting the Module in the Rail:
Removing the Module in the Rail:
5.
INSTALLATION AND WIRING
The module is designed to be installed, in a vertical position, on TS-35 DIN rail. For the
best module performance and duration, avoid placing objects that could obstruct the
ventilation. Never install the modules near heat sources.
1) Attach the module in the lower part of the rail, as shown in the left figure below.
2) Press the module upwards.
1) Apply leverage using a screwdriver, as shown in the right figure below.
2) Press the module downwards.
9
The module has been designed for screw-type terminal electrical connections. Proceed
as follows to make the connections:
1) Strip the cables by 8mm.
2) Insert a screwdriver in hole, unscrewing the screw.
3) Insert the cable in the round hole.
4) Again, use the screwdriver to tight the screw.
5) Remove the screwdriver and make sure that the cable is tightly fastened in the
terminal.
0,2...2,5 mm²
8 mm
10
7.
CONFIGURATION TYPE AND ORDER CODE
The LSP-TST has four different type and the product has to be ordered according to the
analog signal type and sensor that is used with. The following table shows the ordering
codes for each model.
Order Code
Input
Output 1
Pt100
LSP-TSTS-100-420 4-20mA4-
Pt1000
LSP-TSTS-000-420 4-20mA4-
Input
Temperature sensor
Pt100 or Pt1000
RTD open circuit protection
Yes
Output
Output Signal type
Current
Output Range current type
4-20mA on current loop
Output Resistanc
>75Ω
Output current noice
30nAPP
Output accuracy
0,1%
Power Supply
Supply Voltage
16 ~ 30VDC
Power Consumption
<40mA
Reverse-Polarity Protection
Yes
Enclosure
IP Rating
Ip20
Dimensions (L x D x H)
100 x 77.5 x 6.5 mm
Weight
40g (approx.)
Mounting
TS-35 DIN
Maximum Cable Cross-Section
2.5mm2
(max.)
Enviromental Conditions
Ambient Temperature Range
-10 ~ +60ºC
Storage Temperature Range
- 30 ~
+80ºC
Humidity Level
0 ~ 95% RH at 40ºC, no condensation
Over-Scale Limit
Under-Scale Limit 2,2mA
27mA
Over Voltage surge protection 36V
6.
SPECIFICATIONS
Table of contents
Other LEVTECH Transmitter manuals
Popular Transmitter manuals by other brands
Dejero
Dejero EnGo 3x manual
Rosemount
Rosemount 4600 Reference manual
Speaka Professional
Speaka Professional 2342740 operating instructions
trubomat
trubomat GAB 1000 instruction manual
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 instructions
Rondish
Rondish UT-11 quick start guide
