Leviton 47691-5MS User manual

Table of contents

Other Leviton Switch manuals

Leviton

Leviton 321 User manual

Leviton

Leviton OSSNL-ID User manual

Leviton

Leviton 41920-SW4 User manual

Leviton

Leviton 47611-8PT User manual

Leviton

Leviton 35A00-1 Mounting instructions

Leviton

Leviton powerswitch MDS3-AC User manual

Leviton

Leviton decora smart DZ15S User manual

Leviton

Leviton Decora L5614 User manual

Leviton

Leviton powerswitch MDS3 User manual

Leviton

Leviton L1461 User manual

Leviton

Leviton Lumina ZS10S User manual

Leviton

Leviton decora L5613 User manual

Leviton

Leviton PowerSwitch EDSR User manual

Leviton

Leviton Decora Plus 56021 User manual

Leviton

Leviton 5655 User manual

Leviton

Leviton renu RE154 User manual

Leviton

Leviton 1203-PL User manual

Leviton

Leviton 5-Port Gigabit User manual

Leviton

Leviton SS0AV-091 User manual

Leviton

Leviton vizia+ decora VPS15-1L User manual

Leviton

Leviton HCS08 User manual

Leviton

Leviton HCCS7-10W User manual

Leviton

Leviton Scene Capable Electronic Switch User manual

Leviton

Leviton W5601 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

1

Quick-Install Guide

5x8 Multi-Switch

The 5x8 Multi-Switch distributes satellite signals from incoming LNB’s to

up to eight satellite receivers. It is designed to work with all DIRECTV Dish

Antenna Systems and all generations of DIRECTV satellite receivers. The

module also incorporates a separate input to receive TV antenna or CATV

signals.

47691-5MS

Technical Support: 800-824-3005

www.leviton-lin.com

PACKAGE CONTENT

5x8 Multi-Switch

24 VDC Power Supply

6 Push-Lock pins

5x8 BETA GUIDE

The 5x8 Multi-Switch can be installed horizontally or vertically within any Leviton

Structured Media Center (SMC).

For horizonal mounting, snap the supplied grommets in to the locations marked

‘H’. See Figure 1.

For vertical mounting, snap the supplied grommets in to the locations marked ‘V’.

See Figure 2.

Insert the pin plungers in to all 4 locations. With the mounting pin plungers in the

out position, press the unit into the grid in the desired locations. Final setting is

made by pressing the plunger head in to lock it in place.

2

INSTALLATION

Figure 1 Figure 2

3

Connect the cables from the satellite dish to the multi-switch as shown in Figure

3. Connect cables going to the satellite receivers to the “receiver 1 through 8”

connectors.

5x8 BETA GUIDE

Figure 3

4

IMPORTANT INSTRUCTIONS:

Read and understand all instructions. Follow all warnings and

instructions marked on the product.

Do not use this product near water - e.g., near a tub, wash basin,

kitchen sink or laundry tub, in a wet basement, or near a swimming

pool.

Never push objects of any kind into this product through openings, as

they may touch dangerous voltages.

SAVE THESE INSTRUCTIONS!

1.

2.

3.

4.

SAFETY INFORMATION:

Never install communications wiring or components during a

lightning storm

Never install communications components in wet locations unless

components are designed speciﬁcally for use in wet locations.

Never touch uninsulated wires or terminals unless the wiring has been

disconnected at the network interface.

Use caution when installing or modifying communications wiring or

components.

1.

2.

3.

4.

The UHF/VHF input may be used to receive TV antenna or CATV signals. When

combining incoming TV antenna or CATV signals with the incoming satellite signal,

it is necessary to use a diplexer to separate out signals before connecting to the

satellite receivers.

For the power connection to the multiswitch:

Make a coax jumper cable of the desired length.

Connect one end of the jumper to the power connection on the

multiswitch.

Connect the other end of the jumper to the included power transformer.

Plug the power transformer into a powered outlet.

Note: Power the multiswitch using the included power supply only, do

not power the multiswitch until all other connections are made.

•

•

•

•

5

5x8 BETA GUIDE

Notes:

59-25 Little Neck Pkwy.

Little Neck, N.Y. 11362-2591, USA

Tech Support: 800-824-3005

5x8 BETA GUIDE