LevelOne WAB-3000 Setup guide

How to Set Up

WAB-3000 Mesh Network

This guide is written as a reference for setting up a WAB-3000 mesh network by

using the following equipments and network topology as shown in figure 1. Only

parts of WAB-3000 feature will be discussed here. For other unmentioned functions,

please refer to WAB-3000 user manual for details.

WAB-3000-A MAC Address: 00:0B:6B:0A:F2:71

WAB-3000-B MAC Address: 00:0B:6B:0A:F0:16

WAB-3000-C MAC Address: 00:0B:6B:0A:F2:7F

WBR-3406 Internet Service

PC Wireless Card

Figure 1. WAB-3000 Mesh Network Topology

1

1) Make sure a router has access to Internet and it is offering DHCP service. In this

case, LevelOne WBR-3406 router is used and it is giving out IP addresses on

192.168.123.x subnet.

2) Connect all three WAB-3000s to an administrator PC for configuration. For

more detail, please refer to user manual.

3) Open up WAB-3000 web UI, go to System Configuration/Operating Mode

configuration page, and make sure “Wireless Access Point/Bridging Mode” is

selected. This operating mode can be different depending upon user’s need.

2

4) Go to System Configuration/WAN configuration page and select to receive an IP

from a DHCP server.

3

5) Go to System Configuration/LAN configuration page and assign a different IP to

each WAB-3000 for administration purpose.

In this example:

WAB-3000-A is assigned to 192.168.15.11

WAB-3000-B is assigned to 192.168.15.12

WAB-3000-C is assigned to 192.168.15.13

4

6) For the purpose of verifying the success of WAB-3000 mesh network later,

wireless access point of WAB-3000-C is enabled.

5

7) Go to Wireless Bridge/General configuration page. Tow bridging modes are

available: “Manual Bridging” and “Auto Bridging.” For “Auto Bridging” mode,

WAB-3000s would communicate with each other through SSID and establish

bridging automatically. In this guide, “Manual Bridging” mode is selected to

show details of setting up a WAB-3000 mesh network.

6

8) Select “Manual Bridging” mode and enable the spanning tree protocol 802.1d.

7

9) Go to Wireless Bridge/Radio configuration page and adjust the parameters to that

best suit user’s network. Afterwards, click on apply to activate new settings.

10)At the bottom of the configuration page, insert MAC addresses of remote

WAB-3000 adding them to the mesh network. Therefore, in WAB-3000-C,

MAC address of WAB-3000-A and WAB-3000-B are added here. Repeat the

same process on WAB-3000-A and WAB-3000-B.

8

11)Once above steps are done on all three WAB-3000, bridge network would be

established. Bridge information is available on Monitoring/Reports/Bridging

Status configuration page.

9

12)User may view the mesh network on the Monitoring/Reports/Bridging Site Map

configuration page.

10

Other manuals for WAB-3000

1

Other LevelOne Wireless Access Point manuals

LevelOne

LevelOne WAP-6150 User manual

LevelOne

LevelOne WAP-6010 User manual

LevelOne

LevelOne WAB-3003 User manual

LevelOne

LevelOne WAP-0003 User manual

LevelOne

LevelOne WAP-8021 User manual

LevelOne

LevelOne EAP-300 User manual

LevelOne

LevelOne WAP-6010 User manual

LevelOne

LevelOne WAP-1001 User manual

LevelOne

LevelOne WAP-0010 User manual

LevelOne

LevelOne WAP-6013 User manual

LevelOne

LevelOne WAP-6111 User manual

LevelOne

LevelOne 108Mbps PoE User manual

LevelOne

LevelOne WAP-8121 User manual

LevelOne

LevelOne WAP-0003 User manual

LevelOne

LevelOne WAB-8010 User manual

LevelOne

LevelOne WAB-5010 User manual

LevelOne

LevelOne OAN-4058 User manual

LevelOne

LevelOne WAP-0005 User manual

LevelOne

LevelOne WAP-0006 User manual

LevelOne

LevelOne WAB-7400 User manual

LevelOne

LevelOne WBR-2400TX User manual

LevelOne

LevelOne MobilSpot WBR-3800 User manual

LevelOne

LevelOne WBR-3400TX User manual

LevelOne

LevelOne WAP-3000 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide