LevelOne KVM-8916 User manual

LevelOne

KVM-0808/KVM-8916

19” Widescreen LCD Rack Console with

8/16-Port KVM Switch

Quick Installation Guide

Console Combo KVM Switch

Package Checklist

KVM Switch Unit

Quick Installation Guide

Computers/Servers Installation

Each Host port connector is KVM-Cabel type. The 3-in-1 VGA cable has a KVM-Cabel male connector at one end,

plug it into PC port of KVM switch back panel, and plug the other end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse

port.

■USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into

available USB port. This single USB port can communicate both keyboard and mouse signals. It works as a

standard HID (Human Interface Device), no extra driver needed.

■Note: the PS/2 mouse connector should be left disconnected.

Console Installation

Local Console --- Connect the keyboard, mouse and monitor to the local console ports.

Remote Console --- With a CAT5 cable, one end connecting to the RJ45 connector on the CAT5 extender module,

and the other end connecting to CAT5 Receiver.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys & OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first

KVM switch unit on the Daisy chain line is of bank 1 (the

Master). A standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable the Screen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will show up the

is disabled it will show up the Status window

For SUPERVISOR to set the OSD back to factory default

value (except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access

to the KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

This manual suits for next models

Table of contents

Other LevelOne Switch manuals

LevelOne

LevelOne POH-1260 User manual

LevelOne

LevelOne GEL-2460 User manual

LevelOne

LevelOne GTL-5280 User manual

LevelOne

LevelOne FGU-5021 User manual

LevelOne

LevelOne ProCon GSW-2693 User manual

LevelOne

LevelOne GES -2451 User manual

LevelOne

LevelOne GSW-0503T User manual

LevelOne

LevelOne FSW-2106 User manual

LevelOne

LevelOne GEL-5261 User manual

LevelOne

LevelOne KVM-0831 User manual

LevelOne

LevelOne OfficeCon GSW-0841 User manual

LevelOne

LevelOne GEU-0822 User manual

LevelOne

LevelOne GEP-5070 User manual

LevelOne

LevelOne 20 GE PoE-Plus User manual

LevelOne

LevelOne GEP-2681 User manual

LevelOne

LevelOne GSW-0840T User manual

LevelOne

LevelOne GEL-1072 User manual

LevelOne

LevelOne FSW-1607TFX User manual

LevelOne

LevelOne IFE-0500 User manual

LevelOne

LevelOne GEP-0523 User manual

LevelOne

LevelOne GTU-5211 User manual

LevelOne

LevelOne ProCon GSW-4896 User manual

LevelOne

LevelOne ProCon GSW-2456 User manual

LevelOne

LevelOne FGP-1000 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual