LevelOne KCM-0832 User manual

LevelOne

KCM-0832 / KCM-1632

8 / 16-Port KVM Module

Quick Installation Guide

PackageChecklist

KCM-0832 or KCM 1632

Quick Installation Guide

Introduction

Each Host port connectoris HDDB15 type. The 3-in-1 VGA cable has a HDDB15 male connectorat one end, plug it into PC

port of KVM switch back panel, and plug theother end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connectorto keyboard port, and PS/2 mouse connectorto mouse port.

■USB Computers --- connect PS/2-USB changerto PS/2 keyboard connector, then plug the changerinto available USB

port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human

Interface Device), no extra driver needed.

■Note: the PS/2 mouse connectorshould be left disconnected.

HardwareInstallation

Before installation, please make sure all of peripherals and computers have been turned off.

Install ModularKVMSwitch

1. Push KVM switch into the rails from rear of cabinet.

2. Slide the unit into therack and secure it to the rack.

Install the Computer/Server on Host Side

Local Console --- Connect the keyboard, mouse and monitor to the local consoleports.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys& OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first KVM

switch unit on the Daisy chain line is of bank 1 (the Master). A

standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable theScreen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will showup the Login

window waiting for username and password.If Security is disabled

it will showup the Status window

For SUPERVISOR to set the OSD back to factory default value

(except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access to the

KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”. Immediately,

the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch, and does not affect your

computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

Caps

Lock

Caps

Lock

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

This manual suits for next models

Table of contents

Other LevelOne Switch manuals

LevelOne

LevelOne GSW-0509 User manual

LevelOne

LevelOne POH-1250 User manual

LevelOne

LevelOne FSW-1621 User manual

LevelOne

LevelOne GNS-8000A User manual

LevelOne

LevelOne FEP-1601 User manual

LevelOne

LevelOne OfficeCon FSW-2420TX User manual

LevelOne

LevelOne FSW-1609TFX User manual

LevelOne

LevelOne FGP-1072 User manual

LevelOne

LevelOne Infinity IES-2880 User manual

LevelOne

LevelOne 55051007 User manual

LevelOne

LevelOne FSW-0802TX User manual

LevelOne

LevelOne FSW-1610TX User manual

LevelOne

LevelOne GES -2451 User manual

LevelOne

LevelOne GSW-0504 User manual

LevelOne

LevelOne 20 GE PoE-Plus User manual

LevelOne

LevelOne GSW-1641 User manual

LevelOne

LevelOne GTP-2871 User manual

LevelOne

LevelOne GTP-5281 User manual

LevelOne

LevelOne FSW-2106 User manual

LevelOne

LevelOne GTL-2890 User manual

LevelOne

LevelOne GEL-2681 User manual

LevelOne

LevelOne FGL-2870 User manual

LevelOne

LevelOne FSW-1611TX User manual

LevelOne

LevelOne GEP - 5271 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual