Lervia LAMINATOR KH 4410 User manual
Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
www.kompernass.com
ID-Nr.: KH4410-08/05-V2
UK
KH4410_Laminator_UK 09.06.2006 9:22 Uhr Seite 1
Laminator KH 4410
Operating Instructions
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 2
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 3
Lervia KH 4410
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 4
- 3 -
Lervia KH 4410
Laminator KH 4410 Page
1. Intended Use 4
2. Package contents 4
3. Appliance description 4
4. Technical data 4
5. Safety Instructions 5
6. Suitable laminating pouches 6
7. Operating levels 6
8. Preparing for hot lamination 7
9. Preparing for cold lamination 8
10. Lamination process 8
11. Anti block system (ABS) 9
12. Cleaning and care 9
13. Storage 10
14. Disposal 10
15. Warranty & service 10
16. Importer 10
Read the operating instructions carefully before using the appliance for the first
time and preserve this booklet for later reference. Hand over the manual to anyone,
whom you pass on the appliance to.
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 3
- 4 -
Lervia KH 4410
Laminator KH 4410
1. Intended Use
The laminator is intended exclusively for
hot and cold lamination of documents
of paper or cardboard in private
households.
It is not intended for use with other
materials. It is also not intended for
commercial or industrial use.
No warranty is provided for damages
resulting from improper use of the
appliance!
2. Package contents
1 Laminator Lervia KH 4410
10 80 micron laminating pouches DIN
A4 for hot lamination
10 80 micron laminating pouches DIN
A5 for hot lamination
10 80 micron laminating pouches for hot
lamination of business cards
1 Operating instructions
1 Warranty card
3. Appliance description
Pouch guide (rear)
Pouch format lock
LED indicator light "Ready"
ON / OFF LED indicator light
ON / OFF switch
Selector switch for pouch thickness
and cold lamination
Pouch ejector slot (front)
Anti block (ABS) switch
Slot for manual pouch input
4. Technical data
Mains voltage: 220-240 V~, 50 Hz
Rated output: 308 W
Laminating speed: approx. 0.4 m / minute
Lamination thickness: max. 1 mm
Pouch width: max. 230 mm
Pouch thickness: max. 2 x 125 (250)
micron
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 4
- 5 -
5. Safety Instructions
• Do not allow children handle electronic
appliances unsupervised, as they may
not always be able to assess the possible
injury hazards.
• Unplug the power cord after every use
and before cleaning, so as to prevent
the appliance from switching on
inadvertently.
• Check the appliance and all the parts
for visible damages. The safety
concept can work only if the appliance
is in an immaculate condition.
• Never perform hot lamination on
flammable, heat-sensitive and/or
meltable materials and do not laminate
drawings on temperature-sensitive paper
or material that will undergo changes
in colour or quality when subjected to
heat.
• Never laminate valuable, unique docu-
ments. Although the laminator satisfies
all typical safety norms and standards,
errors can never be completely prevented
- as with all electrical appliances.
Errors with the laminator can result in
damage to the document being
laminated.
• Do not laminate any materials with
pouch in a thickness greater than 1.0
mm. Otherwise, the laminating pouch
can be angled incorrectly inside the
device. This can damage the lamina-
ting pouch, the document being
laminated as well as the laminator.
Danger of electrical shock!
• Connect the appliance to a power
socket with a mains voltage of
220 -240 V ~ /50 Hz.
• Do not operate the appliance with
damaged connecting cable or power
plug.
• Get customer service to repair or replace
connecting cables and/or appliances
that are not functioning properly or
have been damaged.
• Never immerse the appliance in water.
Just wipe it with a damp cloth.
• Do not expose the appliance to the
rain and never use it in a humid or wet
environment.
• Make sure that the power cord does
not become wet during operation.
• Unplug the appliance immediately after
use. The appliance is completely
disconnected, only when you pull out
the power plug from the power
socket.
• Do not open or repair the appliance
casing yourself. In this case, the appliance
is not safe and the warranty is voided.
Lervia KH 4410
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 5
6. Suitable laminating pouches
• You can use laminating pouches with a
width of up to 230 mm and a thickness
of max. 2x 125 (250) micron.
• Please note that each laminating
pouch may only be used once for
laminating.
For hot lamination, use only lamina-
ting pouches that are expressly
intended for hot lamination.
For cold lamination, use only lamina-
ting pouches that are expressly
intended for cold lamination.
Note that the laminating pouches
included with the laminator are
intended exclusively for hot
lamination.
7. Operating levels
Tip: For high-gloss photos, select the
switch setting “125”.
Fire hazard!
• Do not use the appliance near hot
surfaces.
• Do not keep the appliance in places
that are exposed to direct sunlight,
as this could lead to overheating and
cause irreparable damage.
• Do not leave the appliance unattended
when in use.
• Never cover the ventilation slits on the
top of the appliance while it is on.
Injury hazard!
•
Keep children away from the connecting
cable and the appliance. Children
frequently underestimate the danger
from electrical appliances.
• Make sure to find a safe place for the
appliance.
• Do not operate the appliance if it has
sustained a fall or is damaged. Get the
appliance checked and repaired by
experts, if necessary.
• Some parts of the appliance become
very hot during operation. To avoid
burns, do not touch these parts.
- 6 -
Lervia KH 4410
Switch setting Laminating pouch
thickness
80 > 60 - 80
Cold to 200
125 85 - 125
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 6
Make certain that all corners of the
document have at least two milli-
metres of space to the edge of the
laminating pouch as shown in Fig. 1.
Make certain that you only use a
single pouch for laminating. Open it
up first, as shown in Fig. 2.
For information about the lamina-
tion process, please read section 10.
- 7 -
8. Preparing for hot lamination
➩Insert the pouch guide into the
holes on the back side of the
laminator.
➩Insert the power plug of the lamina-
tor into a power socket.
➩Be sure to find a stabile location for
the appliance.
➩Switch on the appliance by flipping
the ON / OFF switch . The red
ON / OFF LED indicator light turns
on.
➩Set the selector switch for the pouch
thickness and cold lamination to
the desired pouch thickness
(80 or 125 micron). The laminator
now heats up to the operating
temperature.
• As soon as the green LED indicator
light "Ready" lights up, the
laminator has reached its operating
temperature.
As soon as the operating tempera-
ture is reached, the green LED indi-
cator light “Ready” will light
up. For a more even laminating re-
sult, we recommend that you only
begin the laminating process after
waiting for an additional approx.
2-3 minutes, particularly when using
thinner pouches (less than 125 micron),
or when adjusting a different pouch
thickness.
➩Lay the document to be laminated
into a laminating pouch of the ap-
propriate size.
Lervia KH 4410
Fig. 1
Fig. 2
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 7
- 8 -
9. Preparing for cold lamination
If you have previously performed
hot lamination: Allow the laminator
to cool completely after hot
lamination before you begin the
cold lamination. Otherwise the rolls
inside the laminator are still hot.
This can damage the laminating
pouch and the document to be
laminated!
➩Insert the pouch guide into the
holes on the back side of the laminator.
➩Insert the power plug of the lamina-
tor into a power socket.
➩Be sure to find a stabile location for
the appliance.
➩Switch on the appliance by flipping
the ON / OFF switch . The red
ON / OFF LED indicator light turns
on.
➩Set the selector switch for pouch
thickness and cold lamination to
"COLD".
• As soon as the green LED indicator
light "Ready" lights up, you
can begin the cold lamination.
➩Lay the document to be laminated
into a laminating pouch of the ap-
propriate size.
Make certain that all corners of the
document have at least two milli-
metres of space to the edge of the
laminating pouch as shown in Fig. 1.
Make certain that you only use a
single pouch for laminating. Open it
up first, as shown in Fig. 2.
For information about the lamina-
tion process, please read section 10.
10. Lamination process
➩Lay the laminating pouch onto the
pouch guide . Lay the right or left
edge of the laminating pouch
against the pouch format lock
(closed side first). Slide the pouch
format lock together until the selec-
ted format is reached. This prevents
the laminating pouch from being
pulled in at an angle.
If the pouch is still pulled in at an
angle, use the "Anti block system"
as described in section 11.
➩Now slide the laminating pouch
slowly into the slot for manual
pouch input .
➩When you have slid the laminating
pouch several centimetres into the
slot, it will be pulled in automatical-
ly. Let go of the laminating pouch as
soon as you notice that it is being
pulled in automatically.
Lervia KH 4410
KH4410_Laminator_UK 09.06.2006 9:23 Uhr Seite 8
This manual suits for next models
1
Table of contents
Other Lervia Laminator manuals
