Leonton ET2-1600 Series User manual
LEONTON
ET2-1600 Series
(ET2-1600 / ET2-1600-T)
User Manual
© Copyright 2020 Leonton Technologies Co., Ltd.
All Rights Reserved
This document contains information, which is protected by copyright. Reproduction, adaptation or
translation without prior permission is prohibited, except as allowed under the copyright laws.
Disclaimer
Leonton Technologies, Co. Ltd. provides this manual without warranty of any kind, expressed or
implied, including but not limited to the implied warranties of merchantability and fitness for a
particular purpose. Leonton Technologies, Co. Ltd. may make improvements and/or changes to the
product and/or specifications of the product described in this manual, without prior notice. Leonton
Technologies, Co. Ltd. will not be liable for any technical inaccuracies or typographical errors found
in this guide. Changes are periodically made to the information contained herein and will be
incorporated into later versions of the manual. The information contained is subject to change
without prior notice.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class-A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio communications if the
equipment is not installed and used in accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
Déclaration FCC
Cet équipement a été testé et reconnu conforme aux limites de la classe A pour les équipements
numériques, conformément à la section 15 des Réglementations FCC. Ces limites sont conçues pour
fournir une protection raisonnable contre toutes interférences nuisibles dans un milieu résidentiel.
Cet équipement génère, utilise, et peut émettre de l’énergie de fréquence radio et, s’il n’est pas
installé et utilisé conformément au manuel d’instruction, peut perturber la réception radio.
Cependant, il n’est pas garanti que l’équipement ne produira aucune interférence dans une
installation particulière. Si cet équipement cause des interférences nuisibles à la réception radio ou
télévisée, qui peuvent être déterminées en l’éteignant et le rallumant, l’utilisateur est encouragé à
essayer de remédier au problème en prenant les mesures suivantes:
* Réorienter ou déplacer l’antenne réceptrice.
* Augmenter la distance entre l’équipement et le récepteur.
* Connecter l’équipement à une prise secteur sur un circuit différent de celui utilisé par le récepteur.
* Consulter le négociant ou un technicien radio/TV expérimenté.
ATTENTION: Tout changement ou modification non expressément approuvé par le concessionnaire
de cet appareil pourrait annuler l'autorité de l'utilisateur à utiliser l'équipement.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
CE Mark AVERTISSEMENT
Ceci est un produit de classe A. Dans un environnement domestique, ce produit peut être utilisé en
présence d'interférences radio.
This document is the current official release manual. Please check our website (www.leonton.com)
Contents
Overview.............................................................................................................................................................................................. 1
Key Features.............................................................................................................................................................................. 1
Package Contents ................................................................................................................................................................... 2
Safety Precaution .................................................................................................................................................................... 2
Hardware Description .................................................................................................................................................................... 3
Physical Dimensions .............................................................................................................................................................. 3
Front Panel................................................................................................................................................................................. 4
Top View ..................................................................................................................................................................................... 4
LED Indicators........................................................................................................................................................................... 5
Ethernet Ports........................................................................................................................................................................... 6
Cabling ........................................................................................................................................................................................ 7
Wiring the Power Inputs ...................................................................................................................................................... 7
Wiring the Fault Alarm Contact......................................................................................................................................... 8
Grounding Note ...................................................................................................................................................................... 8
Mounting Installation..................................................................................................................................................................... 9
DIN-Rail Mounting................................................................................................................................................................. 9
Wall Mounting .......................................................................................................................................................................11
Hardware Installation ...................................................................................................................................................................12
Installation Steps...................................................................................................................................................................12
Trouble Shooting ...........................................................................................................................................................................14
1
Overview
This series is rated IP30 and installation by DIN Rail. Each unit of this industrial unmanaged Ethernet
switch series has 16*10/100Tx Ethernet ports, which the RJ-45 interface provides auto detection
of MDI or MDI-X.
In order to prevent unregulated voltage, this series provides high EFT and ESD protection. This also
allows it to function in harsh environments, as well as support power redundancy with a dual power
input design with reverse polarity protection.
With one model having an operating temperature of -10 ~ 65°C, and another with a wide operating
temperature of -40°C ~ 75°C, this series is designed to meet any needs for industrial automation
application and harsh environments.
Key Features
Interface & Performance
•All Copper ports support auto MDI/MDI-X function
•Embedded 16*10/100Tx Ethernet
•Store-and-forward switching architecture
•16K MAC Address Table
•Support 1664 bytes Jumbo packet
•4Mbits memory buffer
Power Input
•Dual 12-48VDC redundant power inputs, with SELV output certified by UL61010-2-201
•1 removable 6-contact terminal block
•Max. current 0.36A
Certification
•CE/FCC
•UL 61010-1
•UL 61010-2-201
Operating Temperature
•Standard operating temperature model: -10°C ~ 65°C
•Extended operating temperature model (–T): -40°C ~ 75°C
Case/Installation
•IP30 protection (not certified by UL)
•DIN-Rail and Wall mount design
•Installation in a pollution degree 2 industrial environment
•Installation in the environment with adequate airflow
2
Package Contents
•1 - ET2-1600(-T) - 0.628 kg (1.38 lb), Shipping weight: 0.812 kg (1.79 lb)
•2 - Wall mounting brackets and screws
•1 - Quick installation guide
Safety Precaution
Attention
If the DC voltage is supplied by an external circuit, please use a protection device on the power
supply input. Supply by UL Listed industrial use power. The industrial Ethernet switch’s hardware
specs, ports, cabling information, and wiring installation will be described within this user manual.
Attention
Si la tension CC est fournie par un circuit externe, veuillez utiliser un dispositif de protection sur
l'entrée d'alimentation. Fourniture par courant industriel homologué UL. Les spécifications
matérielles, les ports, les informations de câblage et l'installation du câblage du convertisseur de
média industriel seront décrits dans ce manuel d'utilisation.
Warning Labels
The caution label means that you should check the certain information on user manual when
working with the device. (Shown in Figure 1.1)
Étiquettes d'avertissement
L'étiquette d'avertissement signifie que vous devez vérifier certaines informations sur le manuel
d'utilisation lorsque vous travaillez avec l'appareil. (Montré dans la Figure 1.2)
Figure 1.1 - Caution Label
Figure 1.1 - Étiquette de mise en garde
Figure 1.2 - Hot Surface Warning Label
Figure 1.2 - Étiquette d'avertissement de surface chaude
3
Hardware Description
Physical Dimensions
Figure 2.1, below, shows the physical dimensions of ET2-1600 series.
(W x H x D) is 46mm x 142mm x 99mm
Figure 2.1: Physical Dimensions
4
Front Panel
The front panel of the ET2-1600 series industrial unmanaged Ethernet switch is shown below in
Figure 2.2.
Figure 2.2: The Front Panel
Top View
Figure 2.3, below, shows the top panel of the ET2-1600 series switches that is equipped with one
6-pin removal terminal block connector for dual DC power inputs (12-48VDC).
Figure 2.3: Top Panel View
LED Indicator
10Mbps Link/Act LED
100Mbps Link/Act LED
10/100Tx RJ45 Copper Port
5
LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that
display the power status and network status. Each LED indicator has a different color and has its
own specific meaning, see below in Table 2.1.
LED
Color
Description
P1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
P2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 is inactive
Off
Power input 1 and 2 are both functional
100M
(LAN Port)
Green
On
Connected to network, 100Mbps
Flashing
Networking is active
Off
Not connected to network
10M
(LAN Port)
Green
On
Connected to network, 10Mbps
Flashing
Networking is active
Off
Not connected to network
Table 2.1: LED Indicators
This manual suits for next models
2
Table of contents
Other Leonton Network Router manuals
Leonton
Leonton EG2-0702-SFP Series User manual
Leonton
Leonton PT2-0800-24 User manual
Leonton
Leonton ET5-0800 Series User manual
Leonton
Leonton PG5-0802-M-24 Series User manual
Leonton
Leonton CET2-0500 Series User manual
Leonton
Leonton EG2-0800 Series User manual
Leonton
Leonton ET2-0500-M12-67 Series User manual
Leonton
Leonton PG5-1600 Series User manual
Leonton
Leonton PG5-0501-SFP-24 Series User manual
Leonton
Leonton PT5-0501-M-24 Series User manual
