LENCO SCD-39 USB User manual

CD/MP3 PLAYER WITH PLL FM RADIO

AND USB READER

SCD-39 USB



Users guide



Please read and follow these instructions before using your unit.

For information and support, www.lenco.com

Dear customer,

Thank you for buying this Lenco product. Quality and usability is our

top priority. In order to let you fully enjoy this product, we have

manufactured this product using high quality standards, materials,

components and care.

SAFETY INSTRUCTIONS

Read carefully before use

CAUTION - RISK OF ELECTRICAL SHOCK - DO NOT

OPEN

CAUTION: TO PREVENTAN ELECTRICAL SHOCK, DO

NOT REMOVE ANY COVER SCREWS. THERE ARE NO

USER SERVICEABLE PARTS INSIDE. REQUESTAQUALIFIED

SERVICE PERSON TO PERFORM SERVICING.

Keep these instructions in mind:

Although this device is manufactured with the utmost care and

checked several times before leaving the factory, it is still

possible that problems may occur, as with all electrical

appliances. If you notice smoke, an excessive build-up of heat or

any other unexpected phenomena, you should disconnect the

plug from the main power socket immediately.

Do not use this device near water.

Clean only with a slightly damp cloth.

Do not cover or block any ventilation opening. When placing the

device on a shelf, leave 5 cm (2”) free space around the whole

device.

Install in accordance with the supplied user manual.

Don’t step on or pinch the power cord. Be very careful,

particularly near the plugs and the cable’s exit point. Do not place

heavy items on the power cord, which may damage it. Keep the

entire device out of children’s reach! When playing with the

power cable, they can seriously injure themselves.

Unplug this device during lightning storms or when unused for a

long period.

Keep the device away from heat sources such as radiators,

heaters, stoves, candles and other heat-generating products.

Avoid using the device near strong magnetic fields.

ESD can disturb normal usage of this device. If so, simply reset

and restart the device following the instruction manual. During file

transmission, please handle with care and operate in a static-free

environment.

Never insert an object into the product through the vents or

openings. High voltage flows thru the product and inserting an

object can cause electric shock and/or short circuit internal parts.

For the same reason, do not spill water or liquid on the product.

Do NOT use in wet or moist areas such as bathrooms, steamy

kitchens or near swimming pools.

Do not use this device when condensation may occur.

This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply

used in your home, consult your dealer or local power company.

The socket outlet must be installed near the equipment and must

be easily accessible.

Do not overload AC outlets or extension cords. Overloading can

cause fire or electric shock.

Devices with Class 1 construction should be connected to a main

socket outlet with a protective earthed connection.

Devices with Class 2 construction do not require a earthed

connection.

Keep away from rodents. Rodents enjoy biting on power cords.

Always hold the plug when pulling it out of the main supply socket.

Do not pull the power cord. This can cause a short circuit.

Avoid placing the device on any surfaces that may be subject to

vibrations or shocks.

When the device is not in use for long periods, unplug the AC

power cable for safety reasons.

To clean the device, use a soft dry cloth. Do NOT use solvents or

petrol based fluids. To remove severe stains, you may use a

damp cloth with dilute detergent.

The supplier is not responsible for damage or lost data caused by

malfunction, misuse, modification of the device or battery

replacement.

WARNING: Prolonged exposure to loud sounds from

personal music players may lead to temporary or permanent

hearing loss.

The USB memory stick should be plugged into the unit

directly. Don’t use an USB extension cable because it can

cause interference resulting in failing of data.

OVERVIEW OF THE PLAYER

1. FOLDING HANDLE

2. FM TELESCOPIC

ANTENNA

3. CD DOOR

4. CD DOOR OPEN AREA

5. SKIP/SEARCH DOWN

BUTTON

6. SOURCE BUTTON

7. STANDBY INDICATOR

8. STOP/CH- BUTTON

9. PLAY/PAUSE/CH+

BUTTON

10. LCD DISPLAY

11. ON/STANDBY BUTTON

12. SKIP/SEARCH UP

BUTTON

13. SPEAKERS

14. MEM/MODE/PROG

BUTTON

15. VOLUME - BUTTON

16. USB PORT

17. VOLUME + BUTTON

18. FOLDER/10+ BUTTON

19. BATTERY

COMPARTMENT

20. DC IN JACK

21. PHONE JACK

22. AUX IN JACK

1234

5678 9101112

13 14 15 16 17 18 13

19 20 21 22

POWER SUPPLY

BATTERY OPERATION

1. Remove the battery compartment cover gently.

2. Install 6 x 'C' size batteries (UM-2 or equivalent) while observing

the correct polarities.

3. Replace the battery compartment cover.

NOTE:

The AC/DC adapter must be detached from the DC IN jack of the

player for battery operation.

Leaking batteries may damage the battery cabinet and the player

as a whole, so they should be removed from the cabinet when

becoming flat or when the player is not to be played on batteries

for some time.

DC INPUT OPERATION

Plug the supplied adapter to the DC IN jack on the unit and the main

power.

NOTE:

If not any audio signal inputs to the unit in about one hour, the unit

will enter to standby mode automatically (except at FM radio mode).

FM RADIO

TUNING THE FM RADIO

1. The standby indicator will light once connect the main unit to the

main power. Press the ON/STANDBY button to turn the unit on

(the standby indicator will be off).

2. Press the SOURCE button repeatedly to switch the unit to radio

mode if necessary.

3. To launch the auto-searching, press and hold the SKIP/SEARCH

DOWN button or SKIP/SEARCH UP button several seconds and

then release it.

4. Press the SKIP/SEARCH DOWN button or SKIP/SEARCH UP

button to tune the radio stations manually.

5. Adjust the volume level to a comfortable listening level via

pressing the VOLUME +/- buttons.

6. Press the ON/STANDBY button to turn off the unit.

NOTE:

The FM telescopic antenna is directional. When you are receiving

an FM broadcast, fully extend the telescopic antenna and rotate it

for the best reception.

STORING YOUR FAVORITE RADIO STATION

1. Tune to your favorite station first; press the MEM/MODE/PROG

button for storing the current station until memory cell number

flashes on the screen.

2. Use the STOP/CH- button or the PLAY/PAUSE/CH+ button to

select the corresponding memory cell among P01-P20.

3. Confirm your selection by pressing the MEM/MODE/PROG

button.

4. During radio playback, press the STOP/CH- button or the

PLAY/PAUSE/CH+ button repeatedly to recall the preset stations.

HANDLING AND MAINTENANCE OF A DISC

Follow the instructions below to handle and

maintain your disc in order that long time and

trouble free performance can possibly be

obtained:

Ensure not to caress the rain bow side of the

HANDLE DISC ONLYAS SHOWN

disc; handle the disc by the edge.

Long time exposure to sunshine, high temperatures and humidity

will damage the disc. And keep storage area clean.

Avoid sticking labels on both sides of a disc. Writing with pointed

articles on the disc should be strictly avoided.

Clean the disc wiping the centre and then working out to the edge

with a dry & soft cloth or a disc brush. Avoid any cleansing lotion

or chemical eradicator.

Store them in their cases when they are not to be used.

LOAD A DISC

1. Open the CD door by the Door open area.

2. Load a disc on the disc tray with the label side facing up.

3. Close the CD door.

PLAY A DISC (CD/MP3)

1. Press the ON/STANDBY button to turn the unit on (the standby

indicator will be off).

2. Press the SOURCE button repeatedly to switch to CD mode.

3. Follow the steps above to load a disc.

4. The player begins reading disc immediately.

5. When the disc is successfully read, the playback will start from the

first track automatically.

6. Press the PLAY/PAUSE/CH+ button once to halt music playback,

press the button again to resume the normal playback; press the

STOP/CH- button to cease music playback.

EXTERNAL MEMORY MEDIA OPERATION (USB)

1. Press the ON/STANDBY button to turn the unit on (the standby

indicator will be off).

2. Insert an USB to the USB port.

3. Press the SOURCE button repeatedly to switch to USB mode.

4. When the inserted USB is detected and read, the first track will be

played automatically.

5. Press the PLAY/PAUSE/CH+ button to pause or resume the

playback.

6. Press the STOP/CH- button to cease the playback.

SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY

(CD/MP3/USB)

1. Press once the SKIP/SEARCH UP button in music play to skip to

the next track; press once the SKIP/SEARCH DOWN button in

music play to go back to beginning of the current track, press the

button twice continuously to skip to the previous track.

2. Press and hold the SKIP/SEARCH UP button or the

SKIP/SEARCH DOWN button in music play to search at quick

rate for a specific point to play.

3. Press the FOLDER/10+ button once in play to skip to the track 10

tracks ahead, twice to skip to the track 20 tracks ahead. You can

reach the last track of the disc using this button.

SKIP TO THE PREVIOUS/NEXT FOLDER (MP3/USB)

1. During playback, press and hold the FOLDER/10+ button until the

folder number flashes on the screen.

2. Press the SKIP/SEARCH DOWN button or SKIP/SEARCH UP

button to select the folder you want.

3. Wait several seconds or press the FOLDER/10+ button to confirm,

the playback starts from the selected folder.

REPEAT PLAYBACK (CD/MP3/USB)

During playback, press the MEM/MODE/PROG button to repeat play

a single track; press the button twice to repeat play all tracks; press

the button three times to enter the introduction play mode; press the

button four times to enter the random play mode; press the button

five times to exit.

PROGRAMMED PLAY (CD/MP3 DISC/USB)

1. In stop mode, press the MEM/MODE/PROG button once, the

program’s icon shows with a program sequence indication "P01"

first, then a track number flickers on the LCD with the program’s

icon.

2. Select the first track to be programmed using the SKIP/SEARCH

UP button or the SKIP/SEARCH DOWN button, and then press

the MEM/MODE/PROG button again to store and advance to the

next programming step (If there are several folders on the MP3

disc or USB, it is necessary to program folders first and then the

tracks. The method of the folders programming is the same as the

tracks programming.).

3. Repeat the above steps to program more tracks. Amaximum of 20

tracks for CD and 99 tracks for MP3 disc/USB can be

programmed in memory in a preferred order. If the memory is full,

the screen will show “FUL” for indicating.

4. Press the PLAY/PAUSE/CH+ button to begin programmed play in

the preferred order after you are done with programming. The

player stops automatically after all programmed tracks are played.

5. You may press the STOP/CH- button to terminate programmed

playback. In program stop mode, press the PLAY/PAUSE/CH+

Other manuals for SCD-39 USB

Table of contents

Other LENCO MP3 Player manuals

Popular MP3 Player manuals by other brands

Blaupunkt

Blaupunkt Compact Drive MP3 operating instructions

Memorex

Memorex MMP9008 - 8GB USB 2.0 user guide

Meizu Electronic Technology

Meizu Electronic Technology E5 user manual

Naxa

Naxa NMV-173NX user manual

Philips

Philips PSA250 Specifications

Zipy

Zipy go! Waving user guide

Sylvania

Sylvania SMPK4068 manual

Sony

Sony NW-MS7 - Memory Stick Walkman Service manual

Irradio

Irradio RF-42UC user manual

NABAIJI

NABAIJI SWIM MUSIC 100 user guide

Laser

Laser MP3-A9-4GB user manual

Samsung

Samsung YP-T7F Service manual

Savant

Savant SMS-1001-00 Deployment guide

Trevi

Trevi XP 71 BT user guide

AGPtek

AGPtek C2 user manual

MobiBlu

MobiBlu DAH-1500i user manual

Denver

Denver MPS-201 user manual

Steren

Steren MP3-002 instruction manual