Leica Lino L2 User manual

Leica Lino

L2,

L2+

L2P5,

P5,

User Manual

1Start up

Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

User Manual

Version 757665d

English

Congratulations on your purchase of the Leica Lino.

The safety instructions follow the

section on how to operate the

instrument. Before starting up the

instrument for the first time, please

read through the entire User Manual paying special

attention to the section Safety Instructions .

Contents

Start up................................................................1

Operation.............................................................2

Technical data ...................................................10

Safety instructions ...........................................12

Start up

Inserting / replacing batteries

Slide the locking button forwards to unlock the

battery compartment. Open the battery compart-

ment cover and insert the batteries, observing the

correct polarity. Then press the battery compartment

cover back down until it engages.

The battery symbol 9 lights up when the battery

voltage is too low. Replace the batteries as soon as

possible.

• Insert the batteries observing the correct polarity

• Use alkaline batteries or rechargeable batteries only

• Remove the batteries if the instrument is not to

be used for a long period of time (to prevent

corrosion)

L2, P3, P5

L2P5, L2+

Operation Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Operation

Keypad and control elements

1LASER key

2PULSE/POWERSAVE MODE key

3Lock switch

Display

4Laser crossline

5Horizontal laser line

6Vertical laser line

7Lock ON

8Pulse/Powersave mode ON

9Battery voltage too low

AT Plumbing and crossline intersection point

AK Plumbing point

AL Laser switched on

L2, P3, P5 L2P5, L2+

L2+

Lino L2+

L2P5

Lino L2P5

Leica Lino L2

P3, P5

12 9

Leica Lino P3

3Operation

Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Switching on/off

Lino L2, L2+ and Lino L2P5:

•ON: Briefly press the LASER key 1.

•OFF: Press and hold down the LASER key 1.

Lino P3 and Lino P5:

•ON: Move the Lock switch 3to the left.

•OFF: Move the Lock switch 3to the right.

Laser functions

Pressing the LASER key 1activates the following

laser functions:

Self-levelling and Lock functions

The instrument automatically levels itself within the

specified grade range (Refer to "Technical data") .

Press the Lock switch 3in order to transport or tilt

the instrument beyond the self-levelling range. When

locked, the pendulum is fixed and the self-levelling

function is deactivated.

Pulse/Powersave mode

(only Lino L2, Lino L2+ and Lino L2P5)

The instrument is fitted with a Powersave mode. If

particularly good visibility of the laser line is not

necessary and you wish to save energy, you can

switch the Pulse mode on and off by pressing the

PULSE/POWERSAVE MODE key 2.

To be able to detect the laser lines over long

distances (> 15 m) or in unfavourable lighting condi-

tions, a laser detector can be used. The detector is

able to locate the laser beam in Pulse mode, even

over long distances.

(Laser detector refer to accessories)

Action P3 P5 L2 L2+

L2P5 L2P5

not in

Lock

mode

in Lock

mode

1x all 3

points

all 5

points

hori-

zontal

and

vertical

hori-

zontal

and

vertical

hori-

zontal

and

vertical

only

hori-

zontal

only

plumbing

points

only

plumbing

points

only

hori-

zontal

only

hori-

zontal

all lines

and

points

only

vertical

3x again as

plumbing

pointand

right/left

only

vertical

only

vertical all points again as

4x - again as

again as

only

plumbin

g point

5x - - - - again as

1x -

Operation Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Applications

5Operation

Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

How to use the wall mount bracket:

L2 P3, P5L2P5, L2+

Operation Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Checking the accuracy of the Leica

Lino

)Check the accuracy of your Leica Lino regu-

larly and particularly before important measuring

tasks.

Checking the accuracy of the levelling

Set the instrument on a tripod half-way between two

walls (A+B) that are approx. 5 m apart.

Place the Lock switch 3in the "Unlocked" ( )

position.

Direct the instrument at wall A and switch on the

instrument. Activate the horizontal laser line or laser

dot and mark the position of the line or the dot on

wall A (-> A1).

Rotate the instrument by 180° and mark the hori-

zontal laser line or the laser dot in exactly the same

way on wall B (-> B1).

Then place the instrument at the same elevation as

close as possible to wall A and again mark the hori-

zontal laser line or the laser dot on wall A (-> A2) .

Rotate the instrument by 180° again and mark the

laser on wall B (-> B2). Measure the distances of the

marked points A1-A2 and B1-B2. Calculate the differ-

ence of the two measurements. If the difference

does not exceed 2 mm, then the Leica Lino is within

tolerance.

| (A1 - A2) - (B1 - B2) | ≤2 mm

A1 B1

2.5 m 2.5 m

5 m

7Operation

Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Checking the accuracy of the horizontal line

(only Lino L2, Lino L2+ and Lino L2P5)

Place the Lock switch 3in the "Unlocked" ( )

position.

Position the instrument approx. 5 m away from the

wall. Direct the instrument at the wall and switch on

with the LASER key 1. Activate the laser line with the

LASER key 1and mark the intersection point of laser

crosshairs on the wall.

Swivel the instrument to the right and then to the

left. Observe the vertical deviation of the horizontal

line from the marking. If the difference does not

exceed 3 mm, then the Leica Lino is within tolerance.

Checking the accuracy of the vertical line:

(only Lino L2, Lino L2+ and Lino L2P5)

Place the Lock switch 3in the "Unlocked" ( )

position.

As reference, use a plumb-bob and attach it as close

as possible to an approx. 3 m high wall.

Position the instrument at a distance of approx.

1.5 m from the wall at an elevation of approx. 1.5 m.

Direct the instrument at the wall and switch on with

the LASER key 1. Activate the laser line with the

LASER key 1. Rotate the instrument and align it with

the bottom of the plumb line. Now read off the

maximum deviation of the laser line from the top of

the plumb line. If the difference does not exceed

2 mm, then the Leica Lino is within tolerance.

max.

3 mm

5 m

1.5 m

max.

2 mm

Operation Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Checking the accuracy of the vertical

plumbing:

(only Lino P3, Lino P5 and Lino L2P5)

Place the Lock switch 3in the "Unlocked" ( )

position.

Checking the upper plumbing point:

Checking the lower plumbing point:

Set up the laser on its tripod or wall mount bracket

near point A1 at a minimum distance of 1.5 m from

point B1. The horizontal laser is aligned in direction 1.

Mark the laser dots A1 and B1 with a pin.

Rotate the instrument by 180° so that it points in the

opposite direction 2 to direction 1. Adjust the instru-

ment so that the laser beam hits point A1 exactly. If

point B2 is no further than 2 mm away from point B1,

then the Leica Lino is within tolerance.

)Should your Leica Lino be outside of the spec-

ified tolerance, please contact an authorised dealer-

ship or Leica Geosystems.

Display notices

Falling below or exceeding the permissible

temperature range:

The laser switches off and all symbols flash.

Outside of the self-levelling range:

The laser switches off and the symbol of the function

used starts to flash.

Pendulum locked:

(only Lino L2, Lino L2+ and Lino L2P5)

The laser beam is not levelled and the Lock symbol 7

lights up.

1.5 m

max. 2 mm

1.5 m

max. 2 mm

9Operation

Leica Lino 757665d en

FIN

ROK

RUS

EST

SLO

Care and advice on operation

Do not immerse the instrument in water. Wipe off dirt

with a damp soft cloth. Do not use aggressive

cleaning agents or solvents. Treat the instrument

with the same care that you would apply to binocu-

lars or a camera.

Dropping or violent shaking of the instrument may

damage it. Check the instrument for any damage

before using it. Check the levelling accuracy of the

instrument regularly.

Transport

To safely transport the instrument, set the Lock

switch 3to "Locked" ( ).

Warranty

This product comes with a three* year warranty from

Leica Geosystems.

More detailed information can be found at:

www.leica-geosystems.com/registration

tions and technical specifications).

*) To receive the three year warranty, the product

must be registered on our website

www.leica-geosystems.com/registration

within eight weeks of the purchase date. If the

product is not registered, a two year warranty

applies.

Other manuals for Lino L2

This manual suits for next models

Table of contents

Popular Laser Level manuals by other brands

Nedo

Nedo ET-5 operating instructions

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP user manual

LaserLiner

LaserLiner X2-Laser manual

Spectra

Spectra LL300N manual

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP user manual

Nedo

Nedo Crossliner 4 operating instructions

Lasertec

Lasertec FX360G instruction manual

Flex

Flex ALC 8 Original operating instructions

Black & Decker

Black & Decker LZR5 user manual

Johnson

Johnson 40-6692 instruction manual

Cocraft

Cocraft HL 20-SG Original instructions

Zircon

Zircon iLine instructions

HWH

HWH 310 SERIES Operator's manual

LaserLiner

LaserLiner SuperCross-Laser SCL 2 operating instructions

LaserLiner

LaserLiner ActiveFinder XP user manual

DeWalt

DeWalt DW082 Original instructions

imex

imex EL20 manual

Fixturlaser

Fixturlaser NXA D I-0912 user manual