LEGRAND PLUGMOLD PM48TC User manual

PLUGMOLD®

PLUG-IN UNITS

I N S T A L L A T I O N I N S T R U C T I O N S

WARNING: For maximum safety, Plugmold Plug-In Units are

equipped with a grounding type plug 3-prong) for use

only with grounding type receptacles. Modification of

the plug to allow its use in non-grounding receptacles

voids the warranty and may lead to electrical shock.

1. Determine the installation location and rotate the

Plugmold Plug-In Unit to the necessary orientation

as ollows:

a. Loosen the 2 phillips head screws near the plug

blades. Do not ully remove the screws.

b. Pull the rotating section o the plug outwards and

rotate to the desired orientation. The Plugmold

Plug-In Unit will rotate in 90° increments only.

c. Push in the rotating section o the plug and tighten

the 2 phillips head screws.

2. Plug the Plugmold Plug-In Unit into the desired

receptacle, hold securely, and mark the wall on top

and bottom o the Plugmold Plug-In Unit where the

mounting clips will be installed.

INSTALLATION:

Legrand/Wiremold electrical systems con orm to and should be

properly grounded in compliance with requirements o the current

National Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or ire hazard i

improperly installed or used. Legrand/Wiremold electrical products

may bear the mark o a Nationally Recognized Testing Laboratory

(NRTL) and should be installed in con ormance with current local

and/or the National Electrical Code.

1 010 518 0811

© Copyright 2011 Legrand/Wiremold All Rights Reserved

WIREMOLD

U.S. and International:

60 Woodlawn Street • West Hart ord, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S.: 860-233-6251

Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4

1-800-723-5175 • FAX 905-738-9721

. Unplug the Plugmold Plug-In Unit and install the

mounting clips on the wall. IMPORTANT – i the lat

head screws urnished are not used, the substitute

asteners must also be o the lat head type, or the

unit will not seat securely in the mounting clips.

4. Plug the Plugmold Plug-In Unit into the receptacle

and snap into the mounting clips.

INSTALLATION continued):

This manual suits for next models

1

Table of contents

Other LEGRAND Power Distribution Unit manuals

LEGRAND

LEGRAND Middle Atlantic Select Series User manual

LEGRAND

LEGRAND RARITAN PXE User manual

LEGRAND

LEGRAND MP6-Megabreak User manual

LEGRAND

LEGRAND 4 130 44 User manual

LEGRAND

LEGRAND PX3 User manual

LEGRAND

LEGRAND Raritan PX3-1000 Series User manual

LEGRAND

LEGRAND Raritan PXO User manual

LEGRAND

LEGRAND 0 734 54 User manual

LEGRAND

LEGRAND PDU zero U User manual

LEGRAND

LEGRAND Server Technology PRO3X User manual

LEGRAND

LEGRAND 6 461 00-CTO User manual

LEGRAND

LEGRAND Arteor 5 735 49 User manual

LEGRAND

LEGRAND Server Technology PRO3X User manual

LEGRAND

LEGRAND Raritan PX4 User manual

LEGRAND

LEGRAND Wiremold Power Commander User manual

LEGRAND

LEGRAND 10'' User manual

LEGRAND

LEGRAND MIDDLE ATLANTIC NEXSYS User manual

LEGRAND

LEGRAND Server Technology PRO4X User manual

LEGRAND

LEGRAND Mosaic 775 40 User manual

LEGRAND

LEGRAND Raritan PX4 User manual

LEGRAND

LEGRAND Middle Atlantic Nexsys PDX-915R User manual

LEGRAND

LEGRAND Server Technology PRO3X User manual

LEGRAND

LEGRAND Raritan PX3-4000 Series User manual

LEGRAND

LEGRAND CS102 User manual

Popular Power Distribution Unit manuals by other brands

hager

hager SP 015 User instructions

Pakedge

Pakedge PowerPak 9 user guide

Pts

Pts 9042 Series installation guide

Shure

Shure WA405 user guide

CORNING

CORNING CCH 4U quick start guide

Panamax

Panamax M4LT-EX datasheet

PANCONNECT

PANCONNECT FLAT 3M Assembly instruction

Raytheon

Raytheon 138-118 manual

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS user manual

Botex

Botex PSA 322-6 DL quick start guide

GE

GE QuiXtra 4000 Assembly and mounting instructions

RDL

RDL EZ Series Installation and operation manual

StarTech.com

StarTech.com RKPW161915 Spec sheet

Vertiv

Vertiv Knürr DI-Strip Rack PDU manual

ABB

ABB PSBS0065 Instruction handbook

Baumuller

Baumuller BFN 3-1-0007-001 Instruction handbook

Eaton

Eaton StructuredWiringSolutions ESWT41600 Instruction leaflet

GE

GE GEK-45404F instructions