lefant T8 Series User manual
Applicable for T800 Series
User Manual
Applicable for T8 Series
Robotic Vacuum Cleaner T8
Please read the instructions carefully before using this product and keep it properly.
Congratulations on the purchase of your Lefant ROBOTICS!
We hope it brings you many years of satisfaction. We trust the purchase of
your new robot will help keep your home clean and provide you more quality
time todo other things.
Wisdom Inspired Freedom
Should you encounter situations that have not been properly addressed in
this Instruction Manual, please contact our Customer Service Center where
atechnician can address your specific problem or question.
For more information,please visit the Lefant ROBOTICS official website:
The Company reserves the right to make technological and/or design changes
to this product for continuous improvemen.
Contents
1
1.Important Safety Instructions·······························
2.Product Composition ·········································
3.Operating and Programming································
3.1 Notes Before Cleaning··············································
3.2 Quick Start·························································
3.3 Cleaning Mode Selection············································
3.4 Scheduling setting··················································
3.5 APP download and network configuration·····························
4.Maintance························································
4.1 Dust Bin and Filters················································
4.2 Roller Brush and Side Brushes······································
4.3 Other Components·················································
5.Indicator Light··················································
6.Troubleshooting················································
7.Technical Parameters········································
2
4
6
6
7
10
11
13
17
17
18
19
20
21
23
1.Important Safety Instructions
2
Whenusing an electrical appliance, basic precautions should alwaysbe followed, including the following:
READ ALL INSTRUCTIONS BEFOREUSING (THIS APPLIANCE)
WARNING:Read all safety warnings and instructions.
1.Do not leave appliance when plugged in. Unplug from outlet when not in use and before
servicing.
2.Do not use outdoors or on wet surfaces.
3.Do not allow to be used as a toy. Close attention is necessary when used by or near children.
4.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
5.Do not handle plug or appliance with wet hands.
6.Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
7.Turn off all controls before unplugging.
8.Use extra care when cleaning on stairs.
9.Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas
where they may be present.
10.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot
ashes.
11.Do not use without dust bag and/or filters in place.
12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on
the switch or energizing appliance that have the switch on invites accidents.
13.Disconnect the battery pack from the appliance before making any adjustments, changing
accessories, or storing appliance. Such preventive safety measures reduce the risk of starting
the appliance accidentally.
14.Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
15.Use appliances only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
16.When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire.
17.Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
18.Do not use a battery pack or appliance that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
19.Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire
or temperature above 130°C may cause explosion. The temperature of 130°C can be replaced
by the temperature of 265°F.
20.Follow all charging instructions and do not charge the battery pack or appliance outside of
the temperature range specified in the instructions. Charging improperly or at temperatures
outside of the specified range may damage the battery and increase the risk of fire.
21.Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
22.Do not modify or attempt to repair the appliance or the battery pack (as applicable) except
as indicated in the instructions for use and care.
SAVE THESE INSTRUCTIONS
2.Product Composition
3
Robot
Start/Pause Button Wi-Fi Indicator Light
Anti-drop Sensors
Roller Brush
Anti-collision Sensor
Battery Cover
Driving Wheels
Dust Bin
Dust Bin/Water Tank
Infrared Receiver
Power Switch
Charging Contacts
Side Brushes
Universal Wheel
and Bumper
2.Product Composition
4
Charging Dock
Cleaning Tool
Charging Dock Pins
Power Indicator Light
Power Adapter
Power Adapter Port
Remote Control
clock icon
Appointment icon
AUTO Mode Button
Time Scheduling Button
Set Current Time Button
Suction/water volume
adjustment
Week display bar
Clock time display
Schedule time display
Mode status display
Return to Charger
Mode Button
Direction Control Button
START/PAUSE Button
Programmed Cleaning Mode
Button
Spot Cleaning Mode Button
Edge Cleaning Mode Button
2.Product Composition
5
Dust Bin
Dust Bin Cover
Filter Net
Sponge Filter
Dust Bin Release Button
High Efficiency Filer（HEPA）
3.1Notes Before Cleaning
6
Please refer to the following guidelines to check the cleaning area before
using the robot.
Remove power cords and small objects from the
Floor that could entangle the products.
The product is not suitable for use on long-pile
carpet. Before using the product near an area rug
or on a short-pile area rug with tasseled edges,
please fold area rug edges under themselves.
If there is a step or stairs in the cleaning area,
please operate robot to ensure its Anti-Drop Sensors
can detect the drop off. lt may be necessary to place
a physical barrier at the edge of the drop off to keep
the unit from falling over the edge.
Please be aware that the robot needs at least an
8 cm(3”)clearance to clean under furniture without
complications.
3.Operating and Programming
3.2 Quick Start
7
Place the Charging Dock on a level floor surface against the wall with the base perpendicular
to the ground.Keep the immediate area 2m(6.6’) in front of the charger and 1m(3.3’) on both
sides of the charger clear of objects and reflective surfaces.
Plug the Charging Dock in. The Power Indicator Light on the Charging Dock glows.
Place the charging Dock Connect the power supply
Charging Dock Placement
Connect the adapter tothe charging Dock
1
Attach Side Brushes to the bottom of
robot by pressing a brush into each
slot until it clicks.
Install Side Brushes
2
Before using the Robot, please remove the
front bumper and charging station Protective
strip and protective film.
Remove Protector
32
1M
1M
2M
3.Operating and Programming
8
Turn the robot’s Side Power Switch to the ON
position. “-” indicates ON and“O” indicates OFF.
Robot is powered ON when button glows a
continuous BLUE.
Start to Charge
Turnon the Robot
1
Charge Robot
2
Place robot on the Charging Dock making sure the
Charging Contacts on robot and the Charging Dock
Pins make a connection. Charge Robot for at least
4 hours before the first use.
making sure the Charging
Contacts on robotand
the Charging Dock Pins
makea connection.
* Usually take 5.5 hours from low battery mode to fully charged.
* button in breathing status when robot is charging. button stops glowing after
robot is fully charged.
3.Operating and Programming
This manual suits for next models
1
Table of contents
Other lefant Vacuum Cleaner manuals
