Ledj LEDJ163 User manual

Order codes:

LEDJ163 - CW Black Housing

LEDJ163A - CW White Housing

LEDJ164 - WW Black Housing

LEDJ164A - WW White Housing

PF 35 Prole Spot

User Manual

www.prolight.co.uk PF 35 Prole Spot User Manual

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.



• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk PF 35 Prole Spot User Manual

Product overview & technical specications

ThePF35Prolespotisaminiprolepoweredbyahighoutput35W

LEDandusesahighqualityopticalsystemforsharpandprecise

projection.Thebeamanglecanbemanuallyfocusedandalsoadjusted

viathe4framingshutters.Customgoboscanbettedintotheunitvia

theeasyaccessslot.Aglasstexturedgoboand4metaleffectgobos

arealsoincluded.Aremovableframeallowsuserstoeasilyinsert

colouredlters.0-100%outputanddimmercurvescanbeselectedvia

theon-board4buttonLEDmenuorDMX.

PF 35 Prole Spot

160mm 430mm

340mm

•1x35WcoolwhiteLED(7500K)/1x35WwarmwhiteLED(3200K)

•Adjustablebeamangle:15°-30°

•1kHzrefreshrate

•Adjustablefocus

•Highqualityopticalsystem

•DMXchannels:1/2or3selectable

•0-100%dimming

•4dimmingcurvesinbothLEDandhalogenproles:

Linear,squarelaw,inversesquarelawandS-curve

•4framingshutters

•Removablecolourframeforlters

•Easyaccessgoboslot

•Includesatexturedglassand4metalgobos

•Bracketallowsformultipleriggingoroorstandingapplications

•PowerCONinput/output

•3-PinXLRinput/output

•Fancooled

•SuppliedwithIRremote

Specications PF 35 Prole Spot

Powerconsumption 43W

Powersupply 100~240V,50/60Hz

Fuse T2A250V

Dimensions 340x160x430mm

Weight 3.2kg

Ordercode LEDJ163-CWVersion,BlackHousing

LEDJ163A-CWVersion,WhiteHousing

LEDJ164-WWVersion,BlackHousing

LEDJ164A-WWVersion,WhiteHousing

CWversion

0m 2m 3m 4m 5m

15° - Lux

30° - Lux

4000

1369

16000

5480

1780

609

30°

1000

343

640

219

15°

WWversion

0m 2m 3m 4m 5m

15° - Lux

30° - Lux

3519

869

14100

3480

1560

386

30°

880

217

563

139

15°

www.prolight.co.uk PF 35 Prole Spot User Manual

Technical specications

01-Earthpoint

02-LCDdisplay

03-Functionbuttons

04-IRremotesensor

05-Colourframereleasemechanism

06-Framingshutters

07-Goboslot

08-Zoomadjustment

09-Focusadjustment

10-3-PinDMXinput

11-3-PinDMXoutput

12-PowerCONinput

13-PowerCONoutput

14-Fuse:T2A250V

15-Hangingbracket

16-Hangingbracketadjustableknob

Inthebox:1 x xture,

4 x metal gobos,

1 x textured glass,

1 x IR remote,

1 x power cable

& 1 x user manual

ZOOM

FOCUS

UPENTER DOWN

PF 35 Prole Spot

www.prolight.co.uk

DMX INPUT DMX OUTPUT

FUSE: T2A 250V

POWER INPUT:

100-240V~50/60Hz

POWER OUTPUT:

100-240V~50/60Hz

03 12

www.prolight.co.uk PF 35 Prole Spot User Manual

Operating instructions

SLAVE MODE Slave mode

DMX MODE

ADDR:001

DMX

address

setting

DMX MODE

ADDR:001

DMX MODE

CHAN: 01

DMX MODE

DELAY:01

DMX MODE

ADDR:512

DMX MODE

CHAN: 02

DMX MODE

CHAN: 03

DMX MODE

DELAY:04

Fade in/out mode

FADE RUN

SPEED:09

FADE RUN

SPEED:01

FADE RUN

SPEED:16

Manual dimming mode

MANUAL

WHIE:255

MANUAL

WHIE:000

MANUAL

WHIE:255

MANUAL

STROB:00

MANUAL

STROB:15

OPTION:

BLGT: ON

Backlight setting

IR setting

Reset factory settings

OPTION

BLGT: ON

OPTION

BLGT:OFF

OPTION

IR : ON

OPTION

IR : OFF

OPTION

SYSRESET

www.prolight.co.uk PF 35 Prole Spot User Manual

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthe

xtureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthetopoftheunittoshow

“DMX MODE ADDR” ontheLCDdisplay.Nowusethe“UP”and“DOWN”buttonstosettherequired

DMXaddress.Pressthe“ENTER”buttontoshow“DMX MODE CHAN” ontheLCDdisplayandusethe

“UP”and“DOWN”buttonstoselecttherequiredtheDMXchannel(1/2or3selectable).Pressthe

“ENTER”buttontoconrmthesetting.Thedimmingcurvesettingswillnowbedisplayed,usethe“UP”

and“DOWN”buttonsontherearoftheunittoselectbetween“DMX MODE DELAY:01” ~

“DMX MODE DELAY:04”.Pressthe“ENTER” buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Master/slave mode:

Tosetthemasterunit,pressthe“MENU”buttononthetopofthemasterunittoselecteitherthemanu-

almodeofthefadein/outmode.

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthetopoftheunittoshow“SLAVE

MODE”ontheLCDdisplay.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Operating instructions

Channel Value Function

1 000-255 Dimmer(0-100%)

2000-015 Nofunction

016-255 Strobe(slow-fast)

2 channel mode:

Channel Value Function

1 000-255 Dimmer(0-100%)

1 channel mode:

DELAY:01-Linear DELAY:02-SquareLaw DELAY:03-InverseSquareLaw DELAY:04-S-Curve

Channel Value Function

1 000-255 Dimmer(0-100%)

2000-031 LEDoff

032-063 LEDon

064-095 Strobe(slow-fast)

096-127 LEDon

128-159 Strobepulse(slow-fast)

160-191 LEDon

192-223 Stroberandom(slow-fast)

224-255 LEDon

3000-020 Linear(dimmingcurve)

021-040 SquareLaw(dimmingcurve)

041-060 InverseSquareLaw(dimmingcurve)

061-080 S-Curve(dimmingcurve)

081-255 Defaultdimmingcurve(setviamenu)

3 channel mode:

www.prolight.co.uk PF 35 Prole Spot User Manual

Operating instructions

Manual dimming mode:

Toaccessthemanualdimmingmodepressthe“MENU”buttonuntilthedisplayshows“MANUAL WHIE”

ontheLCDdisplay.Usethe“UP”and“DOWN”buttonstoselecttherequiredbrightnessfrom“000” ~

“255”.Pressthe“ENTER” buttonandthenusethe“UP”and“DOWN”buttonstoselecttheashspeed

fromfrom“00” ~“15”.Pressthe“ENTER” buttontoconrmthesetting.

Value: 000 - 255 (000 = low brightness, 255 = high brightness)

Value: 00 - 15 (00 = no ash, 15 = fast ash speed)

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fade in/out mode:

Toaccessthefadein/outmode,press“MENU”untilthedisplayshows“FADE RUN”ontheLCD

display.Usethe“UP”and“DOWN”buttonstoselecttherequiredfadespeedfrom“01” ~“16”.

Pressthe“ENTER” buttontoconrmthesetting.

Value: 01 - 16 (01 = slow speed, 16 = fast speed)

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Backlight setting:

Toaccesstheunitsbacklightsetting,press“MENU”untilthedisplayshows“OPTION BLGT”ontheLCD

display.Usethe“UP”and“DOWN”buttonstoselectthebetween“ON” (backlighton)and“OFF”

(backlightgoesoffafter20seconds).Pressthe“ENTER” buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

IR setting:

ToaccesstheunitsIRsetting,press“MENU”untilthedisplayshows“OPTION BLGT”ontheLCDdisplay.

Pressthe“ENTER” buttontoshow“OPTION IR”ontheLCDdisplayandusethe“UP”and“DOWN”

buttonstoselectthebetween“ON” (IRreceiveron)and“OFF” (IRreceiveroff).

Pressthe“ENTER” buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Reset factory settings:

Toresettheunitbacktoitsfactorysettings,press“MENU”untilthedisplayshows“OPTION BLGT”on

theLCDdisplay.Pressthe“ENTER” buttontwicetoshow“SYSRESET”ontheLCDdisplay.Pressboththe

“UP”and“DOWN”buttonstogetherandtheunitwillresettofactorysettings.

Pressthe“ENTER” buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk PF 35 Prole Spot User Manual

Operating instructions

+–

SL S

F D

21 3

54 6

87 9

DIMMING

FLASH DMX MODE

AUTO RUNBLACKOUT

SLAVE SET ADDR

IR remote functions:

01-Setstheunitintoblackoutoff/on(LEDon/off).

02-Runsthefadein/outmode,usethe‘+’and‘–’buttons

toadjusttheprogramspeed.

03-Runsthemanualdimmingmode.Pressthisbuttonfollowed

bythe‘+’and‘–’buttonstoadjustbrightness(000-255).

PresstheFlashbuttonfollowedbythe‘+’and‘–’buttons

toadjusttheashspeed.

04-Setstheashspeedinmanualdimmingmode.Pressthis

buttonfollowedbythe‘+’and‘–’buttonstoadjusttheash

speed.

05-Setstheunitinslavemode.

06-SetstheDMXaddress.Pressthisbuttonfollowedbythe

‘+’and‘–’/numberbuttonstoadjusttheDMXaddress.

07-SetstheDMXaddress,channelanddimmingcurve.

WheninDMXaddressmodepressthisbuttonfollowedbythe‘+’

and‘–’/numberbuttonstoadjusttheDMXaddress.

WheninDMXchannelmodepressthisbuttonfollowedbythe‘+’

and‘–’buttonstoselecttherequiredDMXchannelmode.

Whenindimmingcurvemodepressthisbuttonfollowedbythe

‘+’and‘–’buttonstoselectthedimmingcurverequired(see

page6fordimmingcurves).

08-Adjuststhefadein/outspeed,ashspeed,manualdimming

brightness,DMXaddress,DMXchannelanddimmercurves.

09-NumberbuttonstobeusedwhensettingtheDMXaddress.

www.prolight.co.uk PF 35 Prole Spot User Manual

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-511.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Note: DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk PF 35 Prole Spot User Manual

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.Itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

This manual suits for next models

Table of contents

Popular Dj Equipment manuals by other brands

ALPHA LITE

ALPHA LITE ALPHA 1500 User manual book

Chauvet

Chauvet OVATION E-930VW Quick reference guide

Zumtobel

Zumtobel APHRODITE Home Instructions for use

Snow Masters

Snow Masters Zig Oscillator user manual

EuroLite

EuroLite 50530554 user manual

Beamz

Beamz BUV243 user manual

thomann

thomann Stairville DJ Lase 40-G MK-III user manual

Eagletone

Eagletone 6 Eyes Flower user manual

EuroLite

EuroLite FLD-1508 user manual

Technical Pro

Technical Pro LG8xSEA user manual

JB Systems

JB Systems Lounge Laser DMX Operation manual

Lightmaxx

Lightmaxx Vega Halo 90 user manual

Elation

Elation FUZE WASH Z350 user manual

Maverick

Maverick MK3 WASH Quick reference guide

Infinity

Infinity TF-260C7 Fresnel manual

Chauvet

Chauvet EVE E-50Z Quick reference guide

Eliminator Lighting

Eliminator Lighting E 138 manual

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC user manual