LawnMaster FD2402 User manual
Instruction Manual
2400W Garden Shredder FD2402
WARNING: Read all safety instructions carefully before assembling and operating this
machine. Ensure the machine has been assembled correctly and safely. Keep the instructions
safe and pass them on to any subsequent user so that the information is always available.
Original Instructions
8
7
34
25
1
6
16
17
19
18
20
21
9
10
11 12
13
14
15
4
TABLE OF CONTENTS
Section Page
Symbols
Safety Information
In the Box
Assembly
Operation
Maintenance
Troubleshooting
Technical Data
Recycling and Disposal
5
6-12
13
13-14
14-17
17-18
19
20
20
5
SYMBOL DESIGNATION/EXPLANATION
Caution
Read instruction manual.
Wear eye and ear protection.
Wear hand protection.
Do not expose to rain.
Switch off and remove the plug from the mains before adjusting, cleaning or if
the cord is entangled or damaged.
Danger! Rotating blades. Keep hands and feet out of openings while the
machine is running.
WARNING! Danger from ying objects. Keep your distance from the funnel and
ejection area. Keep bystanders away.
Wait until all machine components have completely stopped before touching
them.
Do not use as a step.
Noise level specication Lwa in dB(A).
Protection class II (Double insulation).
Do not dispose of electrical equipment in domestic waste.
Protection against contact with the ngers and solid foreign bodies with
Ø≥12.5mm, as well as protection against splashed water from all directions.
Machine operated intermittently each cycle comprising a period of operation of
40s at rated power input and a period of 60s with the machine at no load.
SYMBOLS
The following warning symbols appear throughout this manual and indicate the
appropriate safety measures you should take when operating and maintaining the
appliance.
IP24
P40
107
6
■ Read the instructions carefully. Be familiar with the controls
and the proper use of the machine.
■Never allow people unfamiliar with these instructions or
children to use the machine. Local regulations may restrict
the age of the operator.
■The operator or user is responsible for accidents or
hazards occurring to other people or their property.
■Keep this manual in a safe place so that the information is
available at all times.
SYMBOLS
To avoid serious personal injury, do not attempt to use this product until you read thoroughly and
understand completely the instruction manual.
If you do not understand the warnings and instructions in the instruction manual, do not use this
product.
WARNING
SAFETY INFORMATION
When using this equipment, the following safety precautions
must be followed to avoid injuries and damage.
IMPORTANT!
READ CAREFULLY BEFORE USE. KEEP FOR FUTURE
REFERENCE.
IMPORTANT
7
■If you give the equipment to any other person, give them
these operating instructions as well.
■We accept no liability for damage or accidents which result
from non-compliance with these instructions.
■Observe local noise and other regulations.
Preparation
■ This appliance must not be used by people (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
■Children must be supervised to ensure that they do not
play with the appliance.
■Never operate the shredder while people, especially
children, or pets are nearby.
■Wear appropriate ear and eye protection at all times when
operating the shredder.
■Wear appropriate protective clothing, such as protective
gloves, rm footwear and long trousers. Do not operate the
shredder when barefoot or wearing open sandals. Do not
wear loosely tting clothes, or clothes with dangling cords
or belts.
■ Only use the shredder in the open (that is, away from walls
or other rigid structures) and on a rm, level surface.
■Do not operate the shredder on a paved or gravel surface
where ejected material could cause injury.
■Before use, always visually inspect to see that the
shredding means, all of the nuts, bolts and other fastenings
are tight. Covers and shields must be fastened properly
SAFETY INFORMATION
8
SAFETY INFORMATION
and in good working order. Replace any damaged or
illegible stickers.
■Before use, check the power supply and extension
cord for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the machine
if the cord is damaged or worn.
■For your personal safety use replacement parts
and accessories supplied and recommended by the
manufacturer.
■Only supply power to the machine through a circuit
protected by a residual current device (RCD) with a tripping
current of not more than 30mA.
■Keep all guards and shields in place and in good working
condition.
Operational Safety
■ Before starting the shredder, make sure that the hopper
funnel is empty.
■Keep your head, hair and body away from the intake
opening.
■Do not reach into the hopper funnel during operation.
The shredder will continue to run for a short period after
switching it off.
■Keep hands, other body parts and clothing out of the
lling chamber and ejection channel, and away from other
moving parts.
■ Always make sure you are standing in a rm, balanced
position. Do not overreach. Do not lean forwards, and
9
SAFETY INFORMATION
never stand above the shredder when inserting materials.
■Always stand clear of the discharge zone when operating
this machine.
■Make sure that the material inserted into the shredder does
not contain hard objects made of metal, stone, glass or
similar.
■Do not use the shredder in the rain or in bad weather. Work
in daylight or under good articial lighting conditions.
■Do not operate the shredder when you are tired or
distracted, or under the inuence of alcohol or medication.
Always take a break when you need one and be sensible
about how you work.
■Do not leave the shredder working unattended.
■Shut off the shredder before attaching or removing the
collection bag.
■If the shredder is making unfamiliar noises or vibrations,
or the cutting mechanism has struck any foreign objects,
immediately switch it off, and allow the shredder to stop.
Disconnect the power cable and take the following steps
before starting up again:
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
■Switch off the shredder and remove the plug from the
power supply under the following circumstances:
- when you are not using the shredder,
- transporting it or leaving it unattended,
- before releasing a jammed blade,
- when you are checking the shredder, cleaning it or
removing blockages,
- when you are carrying out cleaning or maintenance work or
10
SAFETY INFORMATION
replacing accessories,
- before moving or lifting the shredder.
■Do not transport or tilt the shredder with the motor running.
■Do not allow shredded material to accumulate near the
ejection area. This may otherwise hinder proper ejection
and force the material back up through the funnel.
■In the event of blockages in the machine intake or ejection
channel, switch off the motor and disconnect the machine
from the mains before removing leftover material in the
intake opening or ejection channel.
■ Ensure that the motor is free of rubbish and other
accumulations in order to safeguard the motor from
damage or possible re.
CAUTION
The following states how damage to the shredder and
possible injury to people can be avoided:
■ Handle the unit with care. Clean the ventilation slots
regularly and follow the maintenance instructions.
■ Do not overload your device. Work only within the indicated
range of performance. Do not use low power machines for
heavy-duty work. Do not use your device for purposes for
which it has not been designed.
■ Only switch the shredder off once the hopper funnel is
completely empty. The shredder may otherwise clog up
and not be able to start afterwards.
■ Do not attempt to repair the shredder yourself unless you
are qualied to do so.
Table of contents
Other LawnMaster Paper Shredder manuals
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
