Lark SURFACE SKIMMER User manual

WARNING

Safety Care for Children

1. Children, especially children younger than five years, are at high risk of drowning. Drowning occurs silently and quickly and can occur in as little as 2 in (5 cm) of water.

2. Keep children in your direct sight, stay close, and actively supervise them when they are in or near this pool and when you are filling and emptying this pool.

3. When searching for a missing child, check the pool first, even if the child is thought to be in the house.

4. Locate pumps and filters in such a way that children cannot climb on them and gain access to the pool.

5. WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.

6. WARNING:To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times by an adult who is capable of

assisting a child in distress.

7. SAVE THESE INSTRUCTIONS.

OWNER′S MANUAL

SURFACE SKIMMER

FOR ABOVE GROUND SWIMMING POOLS

IMPORTANT SAFETY INSTRUCTIONS

When installing and using this product, basic safety precautions should always be followed.

READ AND FOLLOW ALL INFORMATION AND INSTRUCTIONS

Keep for future reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children.

Sold & Distributed by Lark Outdoors, Austin, TX USA. Assembly & Service by Polygroup Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong.

If you need help or encounter any problems, please call us at (888) 919-0070, between 8am - 5pm MST (extended operating hours may be available during holiday and peak seasons).

Thank you for your Lark Outdoors purchase! Should you encounter any problems, please DO NOT return the product to your place of purchase.

For assitance with product setup, parts or troubleshooting, please visit support.polygroupstore.com, or call our customer service team at +1 (888) 919-0070.

All warranty claims and parts requests must be made directly to our service & support partner, Polygroup. Depending on the nature of the concern, you may

be asked to return all or part of the product for inspection or repair. Making it right is our top priority!

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

For answers to common questions, setup videos and troubleshooting tips,

please visit our support center at: support.polygroupstore.com,

or call Customer Service at: +1 (888) 919-0070

To order parts, accessories,

and to learn more about our

products, please visit:

www.larkoutdoors.com

DO NOT RETURN PRODUCT TO STORE

PARTS LIST

Part #

Qty.

2 3 4 5 6

11 1 2 1 1 21

P58102301W05 P58102302E09 P5810223AW05 P5810228AW05 P5810224AP0

P5810227AE09

Key

P5810233AP01

P58219221W05

Ring Pool

Holding Frame

(Front)

Ring Pool

Holding Frame

(Rear)

Skimmer

Canister Lock Nut Skimmer

Basket

Frame Pool

Holding Frame

Description Adapter Hose ClampHose

P58150036W01

P58102461W01

Hang the Frame Pool Surface Skimmer onto the top

pole of the frame pool and then turn the Clamp Lock

Screw in clockwise to tighten the Skimmer by hand.

Clamp Lock Screw

Tighten

Loosen

Loosen the Lock Nut

in anti-clockwise by hand

and adjust the position of the Skimmer Canister

on the Frame Pool Holding Frame

. The position of

the Skimmer Canister

should be set as the pool

water surface between the water level marking on the

Skimmer Canister

. Tighten the Lock Nut

clockwise to hold the Skimmer Canister

in your

setting position.

If the Suction Sitting of your pool is the same type as

illustrated in 6.1, attach the Adapter to the Suction

Fitting and screw tightly.

6.1 1

Suction

Fitting

Insert the Skimmer Basket

into the Skimmer

Canister

. Connect the hose into the hose

connector on the bottom of the Skimmer Canister

and fasten the hose by hose clamp.

Turn the Lock Nut

in clockwise to tighten the

Frame Pool Holding Frame

by hand.

Insert the Frame Pool Holding Frame

into the

Skimmer Canister

. Put the Lock Nut

onto

the screw hole of the Skimmer Canister

SETUP INSTRUCTIONS

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.

A. Frame Pool Surface Skimmer

OWNER′S MANUAL

B. Ring Pool Surface Skimmer

Insert the Ring Pool Holding Frame into the Skimmer

Canister

and then put the Lock Nut

onto the

screw hole of the Skimmer Canister

. Tighten the

Lock Nut

in clockwise to fix them by hand.

Insert the Ring Pool Holding Frame (Front)

into the

Ring Pool Holding Frame (Rear)

and then put the

Lock Nut

onto the screw hole of the Ring Pool

Holding Frame (Rear)

. Tighten the Lock Nut

clockwise to fix them by hand.

Insert the Skimmer Basket

into the Skimmer

Canister

Connect the hose into the hose connector on the

bottom of the Skimmer Canister

and fasten the

hose by hose clamp.

If the Suction Fitting of your pool is the same type as illustrated in 6.2,

remove the Suction Fitting Screen from the Suction Fitting Base first.

Attach the Adapter to the Suction Fitting Base and fix tightly.

Then, connect the Hose

to the adapter, and tighten

the Hose Clamp

6.2 1

Suction Fitting Screen

Suction Fitting Base

Hang the Ring Pool Surface Skimmer onto the top

inflatable ring of the ring pool and then loosen the Lock

Nut

in anti-clockwise by hand. Push the Ring Pool

Holding Frame to fix the Ring Pool Surface Skimmer on

the ring pool. (Push the Release Button to loosen the

Ring Pool Holding Frame Rear

Push

Release Button

Tighten

If the Suction Fitting of your pool is the same type as illustrated in 6.2,

remove the Suction Fitting Screen from the Suction Fitting Base first.

Attach the Adapter to the Suction Fitting Base and fix tightly.

6.2

Suction Fitting Screen

Suction Fitting Base

If the Suction Fitting of your pool is the same type as

illustrated in 6.1, attach the Adapter to the Suction

Fitting and screw tightly.

6.1

Suction Fitting

Loosen the Lock Nut

in anti-clockwise by hand

and adjust the position of the Skimmer Canister

on the Ring Pool Holding Frame. The position of the

Skimmer Canister

should be set as the pool

water surface between the water level marking on

the Skimmer Canister

. Tighten the Lock Nut

in clockwise to hold the Skimmer Canister

in your

setting position.

Tighten

Loosen

Then, connect the Hose

to the adapter, and tighten

the Hose Clamp

Other Lark Swimming Pool Pump manuals

Lark

Lark SKIMMERPLUS SFX330 User manual

Popular Swimming Pool Pump manuals by other brands

TIP

TIP STEAM 35000 INV Translation of original operating instructions

Jacuzzi

Jacuzzi J-HI27C Installation and operating instructions

PoolRite

PoolRite SQI 400 quick start guide

Pentair

Pentair IntelliComm Installation and user guide

Calpeda

Calpeda NMP operating instructions

WilTec

WilTec 50374 manual

Evolution

Evolution Evoflow Storm Eco-V Installation and operation manual

AquaTools

AquaTools AT240701 owner's manual

Sibo

Sibo AquaForte RD352 Installation & operation manual

CLS

CLS VICTORIA PLUS SILENT manual

Pond One

Pond One Piranha 800 instruction manual

Hayward

Hayward VSP quick start guide

Resol

Resol DeltaSol B Pro Mounting and operation manual

Evolution Aqua

Evolution Aqua UniTech Perfect 5000 operating instructions

Outside Living Industries

Outside Living Industries Ubbink Heatermax Pool Note of assembly

CPI

CPI Olympic 2P1815 owner's manual

Flotec

Flotec FP6121-01 owner's manual

Pentair

Pentair ONGA LEISURETIME LTP400 owner's manual