Laresar L6 Pro User manual
CONTENTS
IMPORTANT SAFETY WARNING1
PRODUCT INFORMATION
3
MAINTENANCE
4.1 Product Assembling
4.2 Wall-Mount Plate
4.3 Clean the Infrared Lens/Charging and Dust Collection Sensor Head
4.4 Clean the Filter Screen of the Fan
4.5 Clean the Main Brush
4.6 Clean/Replace the Side Brush
4.7 Clean the Sensor
4.8 Battery Maintenance
4.9 Clean the Two-in-one Water Tank
4
SPECIFICATION
5
TROUBLESHOOTING
6
WARRANTY
7
DISPOSAL8
PACKING LIST
2
--------------------------------------------------
--------------------------------------------------------------------------
-----------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------------------------------------------
02
04
05
07
13
14
17
18
-----------------------------------------------------------------------------------
---------------------------------------------------------------------------------------
-----------------
----------------------------------------------------------------
--------------------------------------------------------------------------------
---------------------------------------------------------------------
--------------------------------------------------------------------------------------
----------------------------------------------------------------------------------
----------------------------------------------------------------
07
08
09
09
10
10
10
11
11
01
EN
If you have any questions, please email to support09@laresar.us
1. IMPORTANT SAFETY WARNING
ATTENTION: Before using this machine, please read all instructions in the
manual and cautionary markings on the machine carefully.
This user's manual includes information for Regulatory Models: Laresar L6 Pro Robot Vacuum
Cleaner and Laresar LS-03 Dust Collection Charging Base.
This device is for indoor use only. Do not use outdoors or on wet surfaces. A physical barrier
should be used to prevent access to the balcony and to ensure safe operation.
Do not use this device on an unfinished, unsealed, waxed or rough floor. It may result in
damage to the floor and this device. Use only on hard floor surfaces or low-pile carpet.
This device has been designed to be used on floors without scratching them. We still recom-
mend that you test this device on a small area of the room to be cleaned to ensure no scratch-
es are made before cleaning the whole room.
Do not use this device to pick up spills of bleach, paint, chemicals, or anything wet.
Do not use this device to pick up anything that is burning or smoking.
Do not pour any liquids into the device and do not immerse in water.
This device can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of this device in a safe way and understand
the hazards involved.
Children should be supervised to ensure they do not play with this device. Cleaning and
maintenance shall not be performed by children without adult supervision.
This device is not a toy. Do not sit or stand on this device. Small children and pets should be
supervised when this device is operating.
Before using this device, pick up objects like clothing and loose paper. Lift up cords for blinds
or curtains, and move power cords and fragile objects out of the way. If this device passes
over a power cord and drags it, an object could be pulled off a table or shelf.
Range of Usage
About the Appliance Use
Children and pets should be supervised when the charging base is operating.
Do not sit or stand on this charging base.
Do not use without dust bag and/or filters in place.
Do not put any object into openings. Do not use with any opening blocked, keep free of dust,
lint, hair, and anything that may reduce air flow. Do not place foreign objects inside and ensure
it is clear of debris.
Risk of electric shock, use this charging base in dry location only.
Do not handle plug or appliance with wet hands.
About the Charging Base Use
02
EN
If you have any questions, please email to support09@laresar.us
This device is only to be used with the power supply unit (LS-03) provided.
The battery must be removed from this device before this device is disposed of.
This product comes with a region approved power supply cord and is designed to be plugged
into a standard household AC power outlet only.
Product may not be used with any type of power converter. Use of power converters will imme-
diately void the warranty.
If you live in an area prone to electrical storms, it is recommended that you use additional
surge protection.
The external flexible cable or cord of the power supply unit cannot be replaced, if the cord is
damaged, the power supply unit shall be disposed of.
If it will be not used for a long time, fully charge the appliance, turn it off and put in a cool and
dry place. Charge the appliance at least once every 3 months to avoid battery damage dut to
over discharge.
Notes on Charging
Store and operate this device in room temperature environments only.
Do not place the charging base close to heat sources (such as radiator).
To reduce the risk of electric shock, unplug your dirt disposal before cleaning or maintaining
the product.
Clean with a cloth dampened with water only.
Do not place anything on top of this device.
Do not expose or disassemble the electronics of this device, its battery, or the integrated
Charging Base. There are no user-serviceable parts inside. Refer servicing to qualified
service.
If you need to transport the product, make sure that the appliance is turned off and it is recom-
mended to use the original package.
About Storage and Maintenance
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one more of the follow-
ing measures:
FCC STATEMENT
03
EN
If you have any questions, please email to support09@laresar.us
2. PACKING LIST
SAVE THESE INSTRUCTIONS
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Pic Name
L6 Pro Robot Vacuum
Cleaner
Dust Collection
Charging Base
In the package
In the package
1
1
Two-in-One Water Tank On the robot vacuum
1
Mop Cloth Support On the robot vacuum
1
Mop Cloth
1pcs on the robot
vacuum,1pcs is a gift in the
package
2
Disposable Mop Cloth Gifts, in the package
10
Dust Bag
1pcs on the dust collection
charging base, 4pcs are gifts
in the package
5
Filter Screen 1pcs on the robot vacuum,
1pcs is a gift in the package
2
Qty Place
04
EN
If you have any questions, please email to support09@laresar.us
3. PRODUCT INTRODUCTION
Infrared sensor
Lidar
Anti-collision strip
Infrared sensor
Bumper
Recharge button/indicator
Short press once to recharging
Power button/indicator
Long press for 3 seconds to turn on or off
Short press once to start global cleaning or
pause cleaning
Robot Vacuum Cleaner
Main Brush On the robot vacuum1
1
1
1
1
Side Brush
Cleaning Knife
After-Sales Service
Card
User Manual
Quick Start Guide
Manual
1pcs on the robot vacuum, 1pcs
is a gift in the package
On the dust collection charging
base
In the package
In the package
In the package
2
User Manual
05
EN
If you have any questions, please email to support09@laresar.us
Indicator Reminder
*Indicator status definition :
Breath: Gradually on and off in 4 seconds
Slowly flash: On for 0.7 seconds, off for 0.8 seconds
Faster flash: On for 0.1seconds, off for 0.2 seconds
Mop cloth assembly
Main brush cover
Side wheel
Cliff sensor
Caster
Main brush
Side wheel
Side brush
Cliff sensor
Machine status Status of power indicator
Stand by/pause
Charging
Pause
Cleaning/remote control
Recharging
Abnormal
Turned off
Wi-Fi not connected
Wi-Fi connected
Wi-Fi being connected
Blue light long bright
Blue light breath
Blue light slowly flash
Blue light long bright
Light off
Red light fast flash
Blue light fast flash
Blue light slow flash
Blue light long bright
Blue light long bright
Light off
Light off
Light off
Light off
Orange light long bright
Light off
Light off
Light off
Light off
Light off
Status of recharge indicator
06
EN
If you have any questions, please email to support09@laresar.us
4. MAINTENANCE
Dust Collection Charging Base
4.1 Replace the Dust Bag
When the dust bag is full, the FULL UP sign is keeping high brightness,
and app notice is given. Please replace the dust bag in time.
Charging electrode tip
Dust bin release button
Dust bag chamber
Upper cover
Screen
Dust bag is full: The light will be
bright
Dust bag is not installed
correctly: The light will flash
During dust collection: The lamp
is bright and flashing
Full power: Two grids green
long light
Power≤50%: A grid green long
light
Infrared len
Suction inlet
Charging and dust
collection sensor head
Reset button
Wall-following TOF
sensitive detector
Press and hold for 1 second to restart
“ ”
07
EN
If you have any questions, please email to support09@laresar.us
4.2 Clean the Dust Passage
If all signs are twinkling after the dust bag is replaced, it is recommended
to pull out the power plug and reverse the dust collection charging base
to check whether there are foreign maters blocking the dust passage.
If the dust passage is blocked, remove the transparent cover of the dust
passage with a screwdriver to remove foreign matters.
Note: Violent disassembly is prohibited. After cleaning, replace the cover as it is.
The COLLECTING sign will be high brightness while the collector is
working.
125Open the upper cover Pull up the lifting handle
of the dust bag and take
out the dust bag
Throw away the used
dust
Install a new dust bag
Close the upper cover
！“ ”
08
EN
If you have any questions, please email to support09@laresar.us
4.3 Clean the Infrared Lens/Charging and Dust Collection Sensor Head
4.4 Clean the Filter Screen of the Fan
Wipe them gently with a clean, soft, dry cloth. It is recommended to clean them once a month.
The filter screen of the fan is below the dust bag. If there is dust accumulation, wipe it gently with
a clean, soft, dry cloth. It is recommended to clean them once a month.
Transparent cover of the dust passage
Dust Passage
Infrared lens
Fan filter screen
Charging and dust collection sensor head
09
EN
If you have any questions, please email to support09@laresar.us
Table of contents
Other Laresar Vacuum Cleaner manuals
