La Crosse Technology WT-5120 User manual

868 MHz RADIO CONTROLLED PROJECTION ALARM CLOCK

Instructions manual

INTRODUCTION

Congratulations on purchasing this innovative 868MHz projection alarm clock which

displays indoor and outdoor temperature. To enjoy the full enefits of this innovative

product, please read this operating manual.

PROJECTION ALARM CLOCK

FEATURES

•

DCF-77 Radio controlled time with manual setting option

•

12/24 hours time display (hour, minutes, seconds)

•

Projection of time (hour and minute) and outdoor temperature

•

Projection with adjusta le rightness and projection orientation possi le

•

Calendar display

Battery

compartment

Stand

Adapter socket

Function

keys

LCD

Display

•

Alarm setting with snooze function

•

Time zone setting ±12hours

•

Temperature display in ºC/ ºF

•

Indoor and outdoor temperature display

•

E.L. ack-light

•

Wireless transmission at 868 MHz

•

Signal reception intervals at 4 seconds

•

Low attery indicator

TEMPERATURE TRANSMITTER

•

Remote transmission of outdoor temperature to the

Projection clock y 868 MHz signal

•

Wall mounting case

•

Mounting at a sheltered place. Avoid direct rain and

sunshine

TO INSTALL AND REPLACE BATTERIES INTO THE PROJECTION

CLOCK

The Projection clock uses 2 x AA, IEC LR6, 1.5V atteries. To install and replace the

atteries, please follow the steps elow:

1. Insert finger or other solid o ject in the

space at the ottom center of the attery

compartment and lift up to remove the

cover.

2. Insert atteries o serving the correct

polarity (see marking).

3. Replace compartment cover.

In addition or instead of inserting batteries, the AC adapter can be used

1. Connect the power adapter to a wall socket

2. Insert the adapter into the jack at the ottom of the clock

3. The Projection clock will now start receiving the DCF time signal. After

approximately 3 to 5 minutes, the DCF time will e displayed (Also see "Setting

up" elow).

Important!

Use only the adapter provided with the projection

clock and make sure that your household voltage

is appropriate to the working voltage of the

transformer. Otherwise your Projection clock may

e damaged.

POWER SUPPLIED BY BATTERIES AND AC/DC ADAPTER

If the Projection clock is first powered y atteries and the power adapter is

su sequently used for extended period of time, the main power source of the Projection

clock will switch to AC/DC power. The atteries will then act as a ackup power source

in case of power failure.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER

The temperature transmitter uses 2 x AA, IEC, LR6, 1.5V atteries.

To install and replace the atteries, please follow the steps elow:

1. Remove the cover.

2. Insert the atteries, o serving the correct polarity (see

marking).

3. Replace the attery cover on the unit.

Note:

In the event of changing atteries in any of the units, all units need to e reset y

following the setting up procedures. This is ecause a random security code is

assigned y the transmitter at start-up and this code must e received and stored y

the Projection alarm clock in the first three minutes of power eing supplied to it.

SETTING UP

The Projection clock can be batteries operated or powered by the provided 3.4V

AC/DC adapter.

1. First, insert 2 x AA, IEC LR6, 1.5V atteries into the projection clock (or use the

A/C adapter to power up). Once the atteries are in place, all segments of the

LCD will light up riefly. Then the indoor temperature, the time as 0:00, will e

displayed. If the indoor temperature is not displayed after a few seconds, remove

the atteries and wait for at least 1 minute efore reinserting them. Once the

indoor data is displayed proceed to step 2.

2. Within 1-1/2 minutes of activating the Projection clock, place 2 x AA, IEC LR6,

1.5V atteries into the transmitter.

3. After a few seconds of inserting the atteries into the transmitter, the projection

clock will start receiving data from the transmitter. The remote temperature will

then e displayed on the clock. If this does not happen after 2 minutes, the

atteries will need to e removed from oth units and reset from step 1.

4. When the transmitter is set up, there is a testing period. Then DCF-77 time code

reception is automatically started just after the clock is activated. This takes

typically etween 3-5 minutes in good conditions. This time period is an excellent

opportunity to locate the transmitter in suita le location outdoors. In order to

ensure sufficient 868 MHz transmission however, the distance etween the

Projection clock and the transmitter should not e more than 100 meters (see

notes on “Positioning” and “868 MHz Reception”).

5. If after 10 minutes the DCF time has not een received, use the MODE/ MIN key

to manually enter a time (and date) initially. The clock will automatically attempt to

receive the DCF time each day at 2:00 am. When this is successful, the received

time will override the manually set time.

Note:

Should the total time of inserting the atteries into the transmitter take longer than 1-1/2

minutes from the time of inserting the atteries into the projection clock then

temperature reception pro lems may occur. If the temperature is not eing received,

then see "868MHz reception", efore resetting the units.

In the event of changing atteries to the transmitter, the projection clock needs to e

reset. (See Resetting the projection clock)

RESETTING THE PROJECTION CLOCK

To reset the Projection clock to the factory default setting or in case of a malfunction or

changing atteries to transmitter, please remove all atteries from the unit and unplug

the AC/DC adapter from any power source. Wait at least for 3 minutes efore powering

up the Projection clock again.

BATTERY CHANGE

It is recommended to replace the atteries in all units on an annual asis to ensure

optimum accuracy of these units.

Please participate in the preservation of the environment. Return used

batteries to an authorized depot.

PROJECTION OF TIME / OUTDOOR TEMPERATURE

Note:

The projection is a red light, not harmful under normal usage, yet care should e taken

to avoid looking directly into the light.

1. When plugged into an AC outlet, the projection alarm can continuously project the

time and the outdoor temperature

2. When operating on atteries alone, the projection alarm will only project when the

SNOOZE utton is pressed or the alarm is sounding.

3. The projection will auto-focus for display from a out 1.7 to 2.0 metres away. A

dark surrounding will e necessary to clearly see the projection.

The direction of the display can also e rotated 360° in 90° increments y pressing the

Projection Direction

utton. The projector case can e rotated 180° to further help

orient the projected display.

Other manuals for WT-5120

Table of contents

Other La Crosse Technology Alarm Clock manuals

La Crosse Technology

La Crosse Technology 433 MHz RADIO CONTROLLED PROJECTIONALARM... User manual

La Crosse Technology

La Crosse Technology 617-148 User manual

La Crosse Technology

La Crosse Technology WT-5432 User manual

La Crosse Technology

La Crosse Technology 817-2410B User manual

La Crosse Technology

La Crosse Technology WT-5350 User manual

La Crosse Technology

La Crosse Technology 317-1909 Dimensions

La Crosse Technology

La Crosse Technology 617-89577V3 User manual

La Crosse Technology

La Crosse Technology WT-2165 User manual

La Crosse Technology

La Crosse Technology 617-1485 User manual

La Crosse Technology

La Crosse Technology WS-8248 User manual

La Crosse Technology

La Crosse Technology 616-146 User manual

La Crosse Technology

La Crosse Technology WT-9300 User manual

La Crosse Technology

La Crosse Technology WT-2192 User manual

La Crosse Technology

La Crosse Technology 616-146A User manual

La Crosse Technology

La Crosse Technology 617-1485 User manual

La Crosse Technology

La Crosse Technology 616-146v3 User manual

La Crosse Technology

La Crosse Technology C85135 Dimensions

La Crosse Technology

La Crosse Technology 617-1485Bv3 User manual

La Crosse Technology

La Crosse Technology DCF-77 User manual

La Crosse Technology

La Crosse Technology 617-148TXT User manual

La Crosse Technology

La Crosse Technology 616-1412V4 Dimensions

La Crosse Technology

La Crosse Technology WT-2100 User manual

La Crosse Technology

La Crosse Technology WS-8249U User manual

La Crosse Technology

La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 User manual

Popular Alarm Clock manuals by other brands

Steren

Steren CLK-210 user manual

COP-USA

COP-USA ALCDVR32-SL user manual

Philips

Philips HF3505/70 Quick start card

Casio

Casio PQ-70 user manual

iHome

iHome IA63 user manual

Coopers

Coopers 9765 instructions

ANJANK

ANJANK AC-190 Instruction manual and warranty

TFA

TFA 98.1075 operating instructions

Sharper Image

Sharper Image 204050 instruction manual

Lumie

Lumie Zest manual

Dexford

Dexford RCT200 operating manual

Philips

Philips AJL303/37B user manual

RST

RST Q754 Operation manual

iHome

iHome iKT50 instruction manual

Sony

Sony dash HID-B7 quick start guide

SVINZ

SVINZ SCC009 user manual

Clas Ohlson

Clas Ohlson 918863 quick guide

IKEA

IKEA FNURRA manual