KYMCO B&W 125 User manual
OWNER'S MANUAL
KWANG YANG MOTOR CO.,LTD.
B&W 150/125
Dear KYMCO Motorcycle Users:
Thank you for purchasing this KYMCO scooter and
welcome to the family of KYMCO scooter riders. To enjoy safer and more
pleasant riding, become thoroughly familiar with this owner manual before
you ride the scooter.
A pre-ride inspection before every outing and regular maintenance are
essential. The quality of each KYMCO motorcycle is guaranteed.
Bet & Win 125/150
.
Note: 1. The information and specifications stated in this manual are for
reference only and subject to change without notice.
2. When starting the engine, the battery must be installed to facilitate
starting and increase the engine performance.
Your safety depends not only on your own alertness and
familiarity with the scooter, but also on the scooter's mechanical condition
TABLE OF CONTENTS
1.PRECAUTIONS FOR A SAFE RIDING
2.ASSEMBLY PARTS
3.OPERATION INSTRUCTIONS
4.PRE-RIDE INSPECTION
IGNITION SWITCH/STEERING HANDLEBAR LOCK
ELECTRIC STARTER BUTTON. HEADLIGHT/HAZARD SWITCH
HEADLIGHT DIMMER SWITCH/PASSING SIGNAL SWITCH
HORN BUTTON/TURN SIGNAL SWITCH
SEAT LOCK/ . HELMET BUCKLE
INSTRUMENTS
REAR CUSHION
ADVANCE INSPECTION. ENGINE OIL LEVEL INSPECTION/REFILLING
BRAKE INSPECTION. TIRE INSPECTION
FUEL LEVEL INSPECTION/REFILLING
STEERING HANDLEBAR. INSTRUMENT LIGHTS INSPECTION
BRAKE FLUID LEVEL / COOLING SYSTEM INSPECTION
5.ENGINE STARTING METHODS
STORAGE COMPARTMENT
1
3
6
6
7
8
9
10
11
12
12
13
15
16
17
20
TABLE OF CONTENTS
6.NORMAL RIDING METHOD
7.PRECAUTIONS FOR RIDING
8.HOW TO STOP RIDING
9.EASY MAINTENANCE
10.IMPORTANT NOTICES
USE THE ELECTRIC STARTER BUTTON
START WITH THE KICK LEVER
SPEED CONTROL
AIR CLEANER INSPECTION AND AIR CLEANER CLEANING&REPLACEMENT
BATTERY
FUSE CHANGE
ENGINE OIL CHANGE
TRANSMISSION GEAR OIL
SPARK PLUG INSPECTION
POLLUTION-FREE PERIODIC MAINTENANCE SCHEDULE
SPECIFICATIONS
21
22
23
25
25
28
30
30
32
33
34
35
36
40
42
41
1
1.PRECAUTIONS FOR A SAFE RIDING
(1) CLOTHES
A motorcycle rider should not wear loose or too long
clothes to avoid danger.
During riding or 10 minutes after the motorcycle is
stopped, do not touch the exhaust muffler to avoid
scalding.
When parking the motorcycle, keep it away from dry
lawn or inflammables to avoid danger.
To relax and wear comfortable clothes are the main
points for a safe riding.
Wear helmet and fasten it tightly.
Have the clothes well-arranged. Fasten shirt cuffs and
keep them from hooking the brake lever.
Wear low-heeled shoes for a safe riding.
When riding, use both hands to grasp the handlebar. It
is very dangerous to hold the handlebar with one hand.
To ensure a safe riding, observe traffic laws, keep a cool
mind, relax and be careful.
CAUTION:
(2) RIDING METHOD
The safety of two-wheel vehicles is influenced by sitting
position. The rider should sit on the central part of the
seat cushion. If the rider sits on the rear part of the seat,
the load of front wheel will decrease. As a result, the
handlebar will swing and cause danger to the rider.
When making a turn, it will be easier for the rider to
steer the motorcycle by leaning the body inward slightly.
The motorcycle will lose its balance if the rider fails to
keep his body leaning inward.
When riding on a damaged or macadam road. Slow
down the speed and hold the handlebar tightly.
(3) CARRYING GOODS
Keep a good sitting posture to operate the motorcycle
properly.
The feel of the handlebar will be different when carrying
goods on the motorcycle. Overloading may cause the
handlebar to swing. Avoid riding with overload.
Max. loading capacity of the is 10kg.
storage compartment
2
2. ASSEMBLY PARTS
Passing Signal Switch
Turn Signal Switch
Headlight Dimmer Switch
L. Front Turn Signal Light
L. Rear Turn Signal Light
Frame Serial No.
Kick Lever
Taillight/Stoplight
Seat Lock Air Cleaner
Rear Carrier
Engine Serial number
3
Headlight
Storage Compartment
Fuel Filler
Taillight/Stoplight
R. Rear Turn
Signal Light
Oil Dipstick
Exhaust Muffler
Battery
Headlight Switch
Starter Button
Electric
Radiator
Ignition Switch
R. Front Turn
Signal Light
4
5
Location of Frame Serial Number Location of Engine Serial Number
Vehicle Identification Serial Number
3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING
HANDLEBAR LOCK
ON :At this position, power is connected to start the
engine. The key cannot be taken out.
OFF :At this position, power is cut off and the engine
stops. The key can be taken out.
LOCK :At this position, the steering handlebar is locked.
The key can be taken out
Locking Method
To lock the handlebar, turn the steering handlebar all the way
to the left and then press and turn the ignition switch key to
the "LOCK" Position.
Unlocking Method
Turn the key to "OFF" and the lock is released
automatically.
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to "LOCK" during riding,
or the handlebar will be out of control and cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
CAUTION:
6
Table of contents
Other KYMCO Scooter manuals
KYMCO
KYMCO Sento 50 User manual
KYMCO
KYMCO 50 SENTO 4T User manual
KYMCO
KYMCO People S 250 User manual
KYMCO
KYMCO Sento 50 User manual
KYMCO
KYMCO 50 AGILITY CITY 2T User manual
KYMCO
KYMCO LIKE 200I 2019 Installation instructions
KYMCO
KYMCO Vitality 50 User manual
KYMCO
KYMCO GRAND DINK 250 User manual
KYMCO
KYMCO Maxi XLS User manual
KYMCO
KYMCO People S 250 User manual
KYMCO
KYMCO 50 LIKE 2T User manual
KYMCO
KYMCO K-XCT 300i User manual
KYMCO
KYMCO 125 AGILITY CITY - User manual
KYMCO
KYMCO 50 VITALITY 2T User manual
KYMCO
KYMCO Mini LS User manual
KYMCO
KYMCO Scooter User manual
KYMCO
KYMCO Vitality 50 User manual
KYMCO
KYMCO FILLY LX 50 User manual
KYMCO
KYMCO Movie 125 2V Release note
KYMCO
KYMCO 125 DINK - User manual
