Kwikset SMARTCODE 916 User manual

Programming and Troubleshooting Guide

Mastercode 2

Troubleshooting: Installation 10

Troubleshooting: Door Jamming and Door Handing 11

Troubleshooting: Touchscreen 14

Troubleshooting: Smart Home Systems 15

Troubleshooting: Battery 17

Battery FAQ 18

62818 Rev 02

1 / 18

Technical Support

1-866-863-6584

www.kwikset.com

Mastercode

Programming timeout: If the screen is not pressed for 20 seconds, the system will time out

(indicated by three beeps and the “X” pattern ashing three times), and you will need to restart the procedure.

1. Keep door open. Press and HOLD the Program button until the

Checkmark symbol illuminates (about 5 seconds).

2. Press Checkmark symbol once.

3. Enter new Mastercode.

4. Press Lock symbol once.

5. Re-enter Mastercode.

6. Press Lock symbol once.

Using a Mastercode is an optional, added-security measure. It is not enabled by default. A Mastercode is

used to add and delete user codes, but it cannot unlock the door (unless the same code is programmed

as a user code, though this is not recommended). The Mastercode must be 4-8 digits.

Procedure continued on next page

62818 Rev 02

2 / 18

Technical Support

1-866-863-6584

www.kwikset.com

About the Mastercode

Enabling and Setting the Mastercode

If programming is successful, the Checkmark will illuminate and you

will hear one beep.

If programming is unsuccessful, the “X” pattern will ash three times,

and you will hear three beeps. Make sure the Mastercode has not already

been programmed. Attempt the procedure again, making sure to enter

the same new Mastercode in step 3 and 5.

7. Make sure switch #3 is on, and press the Program button once. If you

immediately hear ve beeps and see the Checkmark ash ve times,

the Mastercode is enabled.

62818 Rev 02

3 / 18

Technical Support

1-866-863-6584

www.kwikset.com

1. Keep door open. Press the Program button once. The Checkmark will

ash ve times and you will hear ve beeps.

2. Press Checkmark symbol once.

3. Enter Mastercode.

4. Press Lock symbol once.

5. Enter new user code.

6. Press Lock symbol once.

If programming is successful, the Checkmark will illuminate and you

will hear one beep.

If programming is unsuccessful, the “X” pattern will ash three times with

three beeps. Make sure the user code is not a duplicate and that it is

between 4 and 8 digits during your next attempt. Make sure the lock has

room for an additional code. If all user codes are lled, delete a code to make

room for this one. Make sure to enter a valid Mastercode in step 3.

7. While the door is open and locked, test the user code to make

sure it unlocks the door.

The procedure for adding user codes is different when the Mastercode is enabled. For instuctions on how

to add user codes when the Mastercode is disabled, see the Installation and User Guide that came with

your lock.

62818 Rev 02

4 / 18

Technical Support

1-866-863-6584

www.kwikset.com

CAdding User Codes with the Mastercode Enabled

1. Keep door open. Press the Program button once. The Checkmark will

ash ve times and you will hear ve beeps.

2. Press Checkmark symbol once.

3. Press Lock symbol once.

4. Enter Mastercode.

5. Press Lock symbol once.

6. Enter user code to be deleted.

7. Press Lock symbol once.

8. Re-enter user code to be deleted.

Procedure continued on next page

62818 Rev 02

5 / 18

Technical Support

1-866-863-6584

www.kwikset.com

DDeleting a Single User Code with the Mastercode Enabled

9. Press Lock symbol once.

If programming is successful, the Checkmark will illuminate and you

will hear one beep.

If programming is unsuccessful, the “X” pattern will ash three times with

three beeps. Make sure to enter a valid Mastercode in step 4.

10. While the door is open and locked, test the user code to make

sure it no longer unlocks the door.

62818 Rev 02

6 / 18

Technical Support

1-866-863-6584

www.kwikset.com

1. Keep door open. Press the Program button once. The Checkmark will

ash ve times and you will hear ve beeps.

2. Press Checkmark symbol once.

3. Press Lock symbol once.

4. Enter Mastercode.

5. Press Lock symbol once.

6. Press “9” six times.

7. Press Lock symbol once.

8. Press “9” six times.

Procedure continued on next page

62818 Rev 02

7 / 18

Technical Support

1-866-863-6584

www.kwikset.com

EDeleting All User Codes with the Mastercode Enabled

9. Press Lock symbol once.

If programming is successful, the Checkmark will illuminate and you

will hear one beep.

If programming is unsuccessful, the “X” pattern will ash three times with

three beeps. Make sure to enter a valid Mastercode in step 4 during your

next attempt.

10.While the door is open and unlocked, press the Lock symbol. If

the latch bolt does not extend to lock, then all codes have been

successfully deleted.

62818 Rev 02

8 / 18

Technical Support

1-866-863-6584

www.kwikset.com

1. Keep door open. Press and HOLD the Program button until the

Checkmark symbol illuminates (about 5 seconds).

2. Press Checkmark symbol once.

3. Press Lock symbol once.

4. Enter Mastercode.

5. Press Lock symbol once.

6. Re-enter Mastercode.

7. Press Lock symbol once.

If programming is successful, the Checkmark will illuminate and you

will hear one beep.

If programming is unsuccessful, the “X” pattern will ash three times, and

you will hear three beeps. Make sure the Mastercode has been enabled

before trying to disable it. Attempt the procedure again, making sure to

enter the same Mastercode in step 4 and 6.

8. Make sure switch #3 is on, and press the Program button once. If you

don’t immediately hear ve beeps and see the Checkmark ash ve

times, the Mastercode is disabled.

62818 Rev 02

9 / 18

Technical Support

1-866-863-6584

www.kwikset.com

FDisabling and Deleting the Mastercode

Troubleshooting: Installation

If you encounter any of the problems above, the deadbolt latch may be

installed upside down. Remove the interior assembly, mounting plate,

and exterior assembly from the door, and look at the latch inside the

door hole.

If the word “UP” is upside down and at the bottom of the latch, the latch

is installed incorrectly.

Reinstall the latch, making sure the word “UP” faces upward.

62818 Rev 02

10 / 18

Technical Support

1-866-863-6584

www.kwikset.com

The interior mounting screws are dicult to tighten.

The interior and exterior assembly won’t mount parallel to the door edge.

The interior assembly does not ﬁt on the mounting plate.

Other manuals for SMARTCODE 916

Table of contents

Other Kwikset Lock manuals

Kwikset

Kwikset HALO TOUCH 959TRL Installation and operating manual

Kwikset

Kwikset SMARTCODE 916 User manual

Kwikset

Kwikset Smartcode 914 User manual

Kwikset

Kwikset SMARTCODE 915 User manual

Kwikset

Kwikset 905 User manual

Kwikset

Kwikset Powerbolt 250 User manual

Kwikset

Kwikset HALO User manual

Kwikset

Kwikset Aura User manual

Kwikset

Kwikset Smartcode 915 User manual

Kwikset

Kwikset Kevo User manual

Kwikset

Kwikset HomeConnect 620 User manual

Kwikset

Kwikset OBSIDIAN Operating instructions

Kwikset

Kwikset PL1 User manual

Kwikset

Kwikset Smartcode 914 Operating instructions

Kwikset

Kwikset SmartCode 913 User manual

Kwikset

Kwikset SmartCode 909 User manual

Kwikset

Kwikset 985 User manual

Kwikset

Kwikset 264 User manual

Kwikset

Kwikset HomeConnect 620 Instruction Manual

Kwikset

Kwikset SmartCode Series Assembly instructions

Kwikset

Kwikset OBSIDIAN User manual

Kwikset

Kwikset Smartcode 914 User manual

Kwikset

Kwikset 48803 / 01 BP User manual

Kwikset

Kwikset SmartCode 913 User manual

Popular Lock manuals by other brands

Magic

Magic 105 manual

Gantner

Gantner GAT NET.Lock 7020 System Installation, configuration & operation

Wittkopp

Wittkopp Insys 7202 manual

Dorma

Dorma Studio Classic Installation instruction

Securam

Securam ECSL-601 quick start guide

Sudhaus

Sudhaus 3003 operating manual

Safety 1st

Safety 1st 48517 user guide

Pado

Pado FDS-10 user manual

Esco

Esco systeQ Series installation instructions

COMPX

COMPX National D8951 instruction sheet

secureo

secureo Key Box instruction manual

Stock Loks

Stock Loks C8713 instruction sheet

COMPX

COMPX 1T-058 Information

Auslock

Auslock T11 user manual

ELCOM

ELCOM 7205 Operating instruction

Stealth SAFES

Stealth SAFES ShadowVault Instructions & Troubleshooting

Knox

Knox KeySecure 5 Admin & user guide

Metra Electronics

Metra Electronics Door Access Terminal Combo Technical manual