KTI Networks KGS-2800 User manual
M
Ma
an
na
ag
ge
ed
d
2
28
8-
-P
Po
or
rt
t
G
Gi
ig
ga
ab
bi
it
t
E
Et
th
he
er
rn
ne
et
t
S
Sw
wi
it
tc
ch
h
w
wi
it
th
h
2
24
4
S
SF
FP
P
P
Po
or
rt
ts
s
a
an
nd
d
4
4
1
10
0G
G
S
SF
FP
P+
+
P
Po
or
rt
ts
s
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
G
Gu
ui
id
de
e
DOC.130918
ABOUT THIS GUIDE
PURPOSE This guide gives specific information on how to operate and
use the management functions of the switch.
AUDIENCE The guide is intended for use by network administrators who
are responsible for operating and maintaining network
equipment; consequently, it assumes a basic working
knowledge of general switch functions, the Internet Protocol
(IP), and Simple Network Management Protocol (SNMP).
CONVENTIONS The following conventions are used throughout this guide to
show information:
WARRANTY See the Customer Support/ Warranty booklet included with
the product.
A copy of the specific warranty terms applicable to your
Manufacture products and replacement parts can be obtained
from your Manufacture Sales and Service Office pr authorized
dealer.
NOTE:Emphasizes important information or calls your
attention to related features or instructions.
W
ARNING
:
Alerts you to a potential hazard that could cause
personal injury.
C
AUTION
:
Alerts you to a potential hazard that could cause loss
of data, or damage the system or equipment.
ii
COMPLIANCES AND
SAFETY STATEMENTS
FCC-CLASS A This equipment has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of
part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his
own expense.
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void
your authority to operate the equipment.
You may use unshielded twisted-pair (UTP) for RJ-45
connections - Category 3 or better for 10 Mbps connections,
Category 5 or better for 100 Mbps connections, Category 5, 5e,
or 6 for 1000 Mbps connections. For fiber optic connections, you
may use 50/125 or 62.5/125 micron multimode fiber or 9/125
micron single-mode fiber.
CE MARK
DECLARATION
OF CONFORMANCE
FOR EMI AND
SAFETY (EEC)
This equipment has been tested and found to comply with the
protection requirements of European Emission Standard
EN55022/EN61000-3 and the Generic European Immunity
Standard EN55024.
EMC:
EN55022(2006)+A1:2007/CISPR
22:2006+A1:2006
Class A
4K V CD, 8KV,AD
IEC61000-4-2 (2001) 3V/m
IEC61000-4-3( 2002) 1KV – (power line), 0.5KV – (signal line)
IEC61000-4-4(2004) Line to Line: 1KV, Line to Earth: 2KV
IEC61000-4-5 (2001) 130dBuV(3V) Level 2
IEC61000-4-6 (2003) 1A/m
IEC61000-4-8 (2001) Voltage dips:
>95%, 0.5period, 30%, 25periods
IEC61000-4-11(2001) Voltage interruptions:
>95%, 250periods
C
AUTION
:
Circuit devices are sensitive to static electricity, which
can damage their delicate electronics. Dry weather conditions
or walking across a carpeted floor may cause you to acquire a
static electrical charge.
To protect your device, always:
Touch the metal chassis of your computer to ground the static
electrical charge before you pick up the circuit device.
Pick up the device by holding it on the left and right edges only.
If you need using outdoor device connect to this device with
cable then you need to addition an arrester on the cable
between outdoor device and this device.
Fig. Addition an arrester between outdoor device and this switch
The switch supports the SFP Vendor includes: Manufacture,
Agilent, Avago and Finisa
v
NOTE:The switch is indoor device; if it will be used in outdoor
environment or connects with some outdoor device, then it must
use a lightning arrester to protect the switch
W
ARNING
:
Self-demolition on Product is strictly prohibited. Damage
caused by self-demolition will be charged for repairing fees.
Do not place product at outdoor or sandstorm.
Before installation, please make sure input power supply and
product specifications are compatible to each other.
To reduce the risk of electric shock. Disconnect all AC or DC
power cord and RPS cables to completely remove power
from the unit.
Before importing / exporting configuration please make sure
the firmware version is always the same.
After firmware upgrade, the switch will remove the
configuration automatically to latest firmware version.
The following publication gives specific information on how to
operate and use the management functions of the switch:
RELATED
PUBLICATIONS The User’s Manual
This section summarizes the changes in each revision of this
guide.
REVISION
HISTORY
Release Date Revision
1.00 2011/12/08 A1
Contents
ABOUT THIS GUIDE.........................................................................................................i
COMPLIANCES AND SAFETY STATEMENTS......................................................iii
INTRODUCTION................................................................................................................1
OVERVIEW.................................................................................................................................... 1
DESCRIPTION OF HARDWARE.................................................................................4
INSTALLING THE SWITCH..........................................................................................7
SELECTING A SITE................................................................................................................... 7
ETHERNET CABLING ............................................................................................................... 7
EQUIPMENT CHECKLIST....................................................................................................... 8
PACKAGE CONTENTS.............................................................................................................. 8
MOUNTING................................................................................................................................... 8
INSTALLING AN OPTIONAL SFP TRANSCEIVER................................................... 10
CONNECTING TO AC POWER SOURCE........................................................................ 12
CONNECTING TO DC POWER SOURCE........................................................................ 13
FIBER OPTIC SFP DEVICES............................................................................................... 15
SPECIFICATIONS...........................................................................................................31
PHYSICAL CHARACTERISTICS........................................................................................ 31
SWITCH FEATURES................................................................................................................ 31
MANAGEMENT FEATURES.................................................................................................... 1
STANDARDS................................................................................................................................. 1
COMPLIANCES.......................................................................................................................... 33
vi
INTRODUCTION
The SW24GF4TG 24-Ports GbE + 4-Port 10GbE Fiber Switch,
Manufacture network next generation solutions, is a portfolio of
affordable managed switches that provides a reliable
infrastructure for your business network. These switches
deliver more intelligent features you need to improve the
availability of your critical business applications, protect your
sensitive information, and optimize your network bandwidth to
deliver information and applications more effectively. Easy to
set up and use, it provides the ideal combination of
affordability and capabilities for entry level Networking
includes Small Business or enterprise application and helps you
create a more efficient, better-connected workforce.
OVERVIEW
The SW24GF4TG 24-Ports GbE + 4-Port 10GbE Fiber Switch is
broad portfolio of easy-implement managed Ethernet switches.
Models include with 24 ports of 1GbE + 4 ports 10G Ethernet
connectivity, providing ideal flexibility to design suitable
network infrastructure for business requirement. However,
unlike other entry-level switching solutions that provide
advance managed network capabilities only in the costliest
models, all the Series Switches support the advanced security
management capabilities and network features to support
includes data, voice, security, and wireless technologies.
Besides, these switches are easy to deploy and configure,
providing stable and quality performance network services
your business needs.
1
Front of the Switches
Side of the Switches (FAN Location)
ARCHITECTURE
s, which effectively doubles the
bandwidth of each connection.
vents errors from being propagated
throughout the network.
SWITCH The switch performs a wire-speed, non-blocking switching fabric.
This allows wire-speed transport of multiple packets at low
latency on all ports simultaneously. The switch also features
full-duplex capability on all port
This switch uses store-and-forward technology to ensure
maximum data integrity. With this technology, the entire packet
must be received into a buffer and checked for validity before
being forwarded. This pre
AC 100V~240V
Power In
p
u
t
Port 1-20 GbE SFP
Fiber Connectors
48VDC Power Input Out of band
Management (RJ45)
Port 25-28 10GbE SFP+
Fiber Connector
Port 21-24 GbE RJ45/SFP
Fiber Connectors
(
Combo
)
Console (DB9)
FAN 3 FAN 2 FAN 1
2
NETWORK
MANAGEMENT
OPTIONS
The switch can also be managed over the network with a web
browser or Telnet application. The switch includes a built-in
network management agent that allows it to be managed
in-band using SNMP or RMON (Groups 1, 2, 3, 9) protocols.
NOTE:For a detailed description of the management features,
refer to the User’s manual.
3
DESCRIPTION OF
HARDWARE
The switch contains 10/100/1000BASE-T RJ-45 ports. All RJ-45
ports support automatic MDI/MDI-X operation, auto-negotiation
and IEEE 802.3x auto-negotiation of flow control, so the
optimum data rate and transmission can be selected
automatically.
1000BASE-T
PORTS
SFP
TRANSCEIVER
SLOTS
SW24GF4TG supports the Small Form Factor Pluggable (SFP)
transceiver slots port 1 to port 24, the port 21 to port 24 are
shared with RJ-45 (the port 21-24 are combo interface
RJ45/SFP). In the default configuration, if an SFP transceiver
(purchased separately) is installed in a slot and has a valid link
on the port, the associated RJ-45 port is disabled.
The port 25 to 28 Supports 10GbE SFP+ transceiver slots, the
port 25 to 28 are high performance interface for backbone
uplink.
The SW24GF4TG switch includes a display panel for system and
port indications that simplify installation and network
troubleshooting. The LEDs, which are located on left hand side of
the front panel for easy viewing. Details are shown below and
described in the following tables.
PORT AND
SYSTEM STATUS
LEDS
Table 2: Port Status LEDs
P1-P24 SFP P21-P24 TP P25-P26 SFP+ MGMT TP
4
Table of contents
Other KTI Networks Switch manuals
KTI Networks
KTI Networks KGS-2423 User manual
KTI Networks
KTI Networks KS-115FM-V User manual
KTI Networks
KTI Networks KGS-0820 User manual
KTI Networks
KTI Networks KFS-0540 User manual
KTI Networks
KTI Networks KS-SOHO-5 User manual
KTI Networks
KTI Networks KS-801 User manual
KTI Networks
KTI Networks KCD-303P-A1 User manual
KTI Networks
KTI Networks KGS-2461-S User manual
KTI Networks
KTI Networks KS-108F User manual
KTI Networks
KTI Networks KGD-802 User manual
KTI Networks
KTI Networks KGS-1064-HP User manual
KTI Networks
KTI Networks KSD-103-A Series User manual
KTI Networks
KTI Networks KGS-2422 User manual
KTI Networks
KTI Networks KGS-2422-TG Series User manual
KTI Networks
KTI Networks KGS-2421 User manual
KTI Networks
KTI Networks KS-116 User manual
KTI Networks
KTI Networks KCD-303P-A Series User manual
KTI Networks
KTI Networks KF-16M User manual
KTI Networks
KTI Networks KGS-0800-4HP User manual
KTI Networks
KTI Networks KS-105F-B Series User manual
