Kramer PT-2UT/R-KIT User manual

PT-2UT Quick Start

P/N:

2900- 301354QS

Rev:

Scan for full manual

PT-2UT/R Kit Quick Start Guide

This guide helps you install and use your PT-2UT/R kit for the first time.

Go to www.kramerav.com/downloads/PT-2UT/R to download the latest user manual and check iffirmware

upgrades are available.

Step 1: Check what’s in the box

PT-2UT USB Transmitter and PT-2UR USB Receiver

2 Bracket sets

8 Rubber feet

1 C-USB/AB-6 cable

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your PT-2UT/R

PT-2UT

Feature

Function

AUDIO IN 3.5mm Mini Jack

Connect to an unbalanced stereo audio source.

USB 2 Type B Port

Connect to USB host.

LINK LED

Flashes blue when a link is established.

ON LED

Lights green when locally powered by the power adapter.

Lights orange when powered by PoC.

LINK OUT RJ-45 Connector

Connect to the LINK IN port on the PT-2UR.

PROG (Tx, Rx)

5-pin Terminal Block Connector

(with common G pin)

Connect for firmware upgrade.

RS-232 (Rx, Tx)

Connect for serial extension (9600 baud rate).

12V DC Power Connector

Connect to the supplied power adapter.

PT-2UR

Feature

Function

LINK LED

Flashes blue when a link is established.

AUDIO OUT 3.5mm Mini Jack

Connect to an unbalanced stereo audio acceptor.

USB 2 Type A Ports (1 to 4)

Connect to USB devices.

Connect PT-2UR directly to the power adapter in order to charge

USB devices.

ON LED

Lights green when locally powered by the power adapter. Lights

orange when powered by PoC..

LINK IN RJ-45 Connector

Connect to the LINK OUT port on the PT-2UT.

PROG (Tx, Rx)

5-pin Terminal Block Connector

(with common G pin)

Connect for firmware upgrade.

RS-232 (Rx, Tx)

Connect for serial extension (9600 baud rate).

12V DC Power Connector

Connect to the supplied power adapter.

Step 3: Mount PT-2UT / PT-2UR

Install PT-2UT using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/PT-2UT/R).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/PT-2UT/R).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your PT-2UT / PT-2UR.

Devices that are connected to the PT-2UR USB ports are powered/charged while connected.

Only 9600 baud rate is supported for RS-232 communication for both PT-2UT and PT-2UR, .

Wiring the RJ-45 Connectors

This section defines the TP pinout, using

a straight pin-to-pin cable with RJ-45

connectors.

EIA /TIA 568B

Wire Color

Orange / White

Orange

Green / White

It is recommended that the cable

ground shielding be

connected/soldered to the connector

shield.

Blue

Blue / White

Green

Brown / White

Brown

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/PT-2UT/R.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to PT-2UT / PT-2UR and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

This manual suits for next models

Popular Transmitter manuals by other brands

NIVELCO

NIVELCO EasyTREK SCA-300 Series Programming manual

Honeywell

Honeywell 5816WMBR installation instructions

Kamstrup

Kamstrup READy MTU Installation and operation guide

Omega

Omega ZW Series user guide

ABB

ABB Field 264H Instructions for installation

Alinco

Alinco DJ-V17T Service manual

Dejero

Dejero EnGo 3x manual

Rosemount

Rosemount 4600 Reference manual

Speaka Professional

Speaka Professional 2342740 operating instructions

trubomat

trubomat GAB 1000 instruction manual

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 instructions

Rondish

Rondish UT-11 quick start guide

MG 10JRE instruction manual

Burkert

Burkert 8177 operating instructions

Firetide

Firetide HotPort 3203 Hardware installation guide

Tele Radio

Tele Radio T9-02 User instructions

Rotronic

Rotronic HygroFlex HF3 Series user guide

Jamara

Jamara FCX6 Pro Tel Instruction