Kramer RS-232 User manual

USER MANUAL

MODEL:

RS-232 Extender

P/N: 2900-300284 Rev 1

RS-232 Extender – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the RS-232 Extender 4

4Connecting the RS-232 Extender 5

5Technical Specifications 6

5.1 9-pin D-sub Pin Connections 6

Figures

UFigure 1: RS-232 Extender Connection DiagramU5

RS-232 Extender - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer RS-232 Extender , which is ideal for

the following typical applications:

•Projection systems in conference rooms, boardrooms, auditoriums, hotels

and churches, production studios, rental and staging

•Any application where high quality conversion and switching of multiple and

different video signals to graphical data signals is required for projection

purposes

2 RS-232 Extender - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer RS-232 Extender away from moisture, excessive

sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

RS-232 Extender - Getting Started 3

2.2 Safety Instructions

Caution: There are no operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 RS-232 Extender - Overview

3 Overview

The RS-232 Extender extends control and remote access of any RS-232 device

by up to 1000m (3300ft). For example, use it to give remote access from a touch

screen, a presentation unit or to transfer data between computers.

In particular the RS-232 Extender features:

•A data rate of 57.6kbps up to 1000m (3300ft)

•Full-duplex communication

•Advanced CAT 5 technology

•A pure hardware solution – real time data transfer with no software conflicts

•Plug and Play installation, no extra protocols needed

•A 3-year warranty

3.1 Defining the RS-232 Extender

The RS-232 Extender system consists of:

•1 local unit

•1 remote unit

•1 power adapter

This table defines the model:

Kramer Model Kramer Part

Number

Full Description

EXT-RS232

(OVS22013) 50-0001009011 Minicom RS232 EXTENDER

RS-232 Extender - Connecting the RS-232 Extender 5

4 Connecting the RS-232 Extender

Always switch off the power to each device before connecting it to your

RS-232 Extender. After connecting your RS-232 Extender, connect

its power and then switch on the power to each device.

Note! In the RS-232 Extender system, the CAT 5 cables carry

electrical power. Do NOT connect them to any other device. To avoid

this, we recommend that you attach the stickers provided to the ends

of the CAT 5 cable.

Figure 1illustrates the RS-232 Extender connections.

•Connect the local and remote RS-232 extender units to each other using a

CAT 5 cable.

•Up to 330m (1000ft), connect a power adapter to either the local or remote

RS-232 extender unit.

•For distances of more than 330m (1000ft) connect a power adapter to both

the local and remote RS- 232 extender units. Additional power adapters can

be ordered from Kramer.

Once connected, the RS-232 Extender system is ready to transmit RS-232

signals.

Figure 1: RS-232 Extender Connection Diagram

6 RS-232 Extender - Technical Specifications

5 Technical Specifications

INPUTS: RS-232 on a 9-pin D-sub F connector (local unit)

CAT 5 on an RJ-45 connector (remote unit)

OUTPUTS: CAT 5 on an RJ-45 connector (local unit)

RS-232 on a 9-pin D-sub M connector (remote unit)

SYSTEM CABLE: CAT 5 UTP/FTP 2x4x24AWG solid wire cable

OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE: -40° to +70°C (-40° to 158°F)

HUMIDITY: 80% RHL non-condensing

DIMENSIONS: 75mm x 45mm x 25mm (3.0” x 1.8” x 1.0”)

WEIGHT: 120g

ACCESSORIES: 12V DC, 1A power supply

Specifications are subject to change without notice at http://www.kramerelectronics.com

5.1 9-pin D-sub Pin Connections

Pin Function

Pin 1 N/C

Pin 2 Receive data

Pin 3 Transmit data

Pin 4 Data terminal ready

Pin 5 Signal ground

Pin 6 Data set ready

Pin 7 Request to send

Pin 8 Clear to send

Pin 9 N/C

For the latest information on our products and a list of Kramer distributors,

visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

Web site:

E-mail:

www.kramerelectronics.com

info@kramerel.com

P/N:

2900- 300284

Rev:

SAFETY WARNING

Disconnect the unit from the power

supply before opening and servicing

Table of contents

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual