Kramer Pico TOOLS VM-2HD User manual

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VM-2HD

HD/SD-SDI DA

P/N: 2900-000194 Rev 3

VM-2HD – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the VM-2HD HD/SD-SDI DA 5

4Connecting the VM-2HD 6

5Technical Specifications 7

Figures

Figure 1: VM-2HD HD/SD-SDI DA 5

Figure 2: Connecting the VM-2HD HD/SD-SDI DA 6

VM-2HD - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer VM-2HD HD/SD-SDI DA, which is

ideal for the following typical applications:

SDI production studios for signal distribution and equalizations

Broadcast studios for on-air operation and SDI field production

Using with SDI video sources such a professional digital camera

VM-2HD - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VM-2HD away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

VM-2HD - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VM-2HD - Overview

3 Overview

The VM−2HD is a high−performance distribution amplifier for HD−SDI signals. It

takes one input, provides reclocking and equalization and distributes the signal to

two identical outputs.

In particular, the VM-2HD features:

A range of up to 200m

Video bandwidthof 1.485Gbps that enables it to be used forstandarddefinition

and high definitionserial digital video signals (SD/HD-SDI)

Passing of digital information (embedded audio, Teletext, time code and so

on) during the vertical interval period

SMPTE 292M, 259M and 344M compliance and support for data rates of

143, 177, 270, 360, 540, 1483.5, 1485Mbps

Automatic, multi-rate, equalization and reclocking for losses typical with long

runs of 75co-axial cable up to 200m

LEDs indicating the SDI resolution

VM-2HD - Overview

3.1 Defining the VM-2HD HD/SD-SDI DA

This section defines the VM-2HD.

Figure 1: VM-2HD HD/SD-SDI DA

Feature

Function

HD LED

Lights when the SDI signal is HD

SD LED

Lights when the SDI signal is SD

INPUT BNC connector

Connects to the SDI source

ON LED

Lights when receiving power

OUT 1 BNC connector

Connects to the SDI acceptor 1

OUT 2 BNC connector

Connects to the SDI acceptor 2

12V DC

+12V DC connector for powering the unit

VM-2HD - Connecting the VM-2HD

4 Connecting the VM-2HD

Always switch off the power to each device before connecting it to your

VM-2HD. After connecting your VM-2HD, connect its power and then

switch on the power to each device.

To connect the VM-2HD as illustrated in the example in Figure 2:

1. Connect an HD-SDI/SD-SDI video source (for example, a camera) to the

INPUT BNC connector.

2. Connect up to two video OUT BNC connectors to the appropriate

HD-SDI/SD-SDI video acceptors (for example, displays).

You do not have to connect both outputs.

3. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in Figure 2).

Figure 2: Connecting the VM-2HD HD/SD-SDI DA

VM-2HD - Technical Specifications

5 Technical Specifications

INPUT:

1 SMPTE-259M, 292M, 344M serial video, 75 ohms on a

BNC connector

OUTPUTS:

2 equalized and reclocked SMPTE-259M, 292M, 344M

outputs 75 ohms on BNC connectors

MAX. OUTPUT LEVEL:

800mVpp /75 ohms

COUPLING:

POWER CONSUMPTION:

12 V DC, 250mA

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

6.22cm x 5.24cm x 2.41 cm (2.45" x 2.06" x 0.95") W, D, H.

WEIGHT:

0.14 kg (0.31 lbs.) approx.

ACCESSORIES:

Power supply, mounting bracket

Specifications are subject to change without notice at http://www.kramerelectronics.com

Other manuals for Pico TOOLS VM-2HD

Table of contents

Popular Amplifier manuals by other brands

ASTRO

ASTRO HVO V40 P operating manual

Marantz

Marantz SUPERSCOPE BLA-545 Service data

NAD

NAD CI980 Quick setup guide

Technics

Technics SE-CH770 Service manual

Harman Kardon

Harman Kardon HK6300 instruction manual

NAD

NAD T975 owner's manual

McIntosh

McIntosh MA6850 Brochure & specs

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N manual

Viatron

Viatron Autrix Technical manual

GME

GME GA9800 instruction manual

Atlas

Atlas CP700 Specification sheet

Roland

Roland KC-1000 owner's manual

Pyle

Pyle PFMRA350BW user manual

Advantage

Advantage S-250 manual

IRT Electronics

IRT Electronics DVA-3007 manual

Dimavery

Dimavery BA-100 Series user manual

Sony

Sony XM-S400D operating instructions

Schertler

Schertler ROY X quick guide