Korg Digital Mixer ZERO8 Technical manual
Figure 2: Buttons to press for system update
BANK C
FireWire LED
EXT 1 CUE
Update Instruction for Mac
Turn your ZERO8 on.
Check the current ZERO8 version
appearing on the startup screen
(Figure 1).
Turn your ZERO8 off.
The ZERO8 system update requires a FireWire cable and computer with the
update downloaded. Your system must be Mac OS X 10.3.9 or higher.
At present, the updater is not compatible with OS X 10.4.10. It has been
successfully tested for use in OS x 10.4.9 and OS X 10.5
1.
2.
3.
Checking the current version
ZERO8 System Updater Ver 1.5
Figure 1: ZERO8 startup screen
With your ZERO8 turned off, connect
the FireWire cable to your Macintosh
machine and ZERO8.
While pressing and holding the EXT1
CUE and BANK C buttons shown in
Figure 2, power on your ZERO8.
Verify that the SYSTEM UPDATE
WAIT message flashes on the LCD.
Do not proceed until the FIREWIRE
LED shown in Figure 2 lights up.
1.
2.
3.
4.
ZERO8 system update (Preparing the ZERO8)
Note:
Update Instruction for Mac
Extract the downloaded file. Double-
click on KORG ZERO8 System xxx
Updater (xxx for the version number)
in the System folder to start up the
application.
Press [Detect] to scan and find
your ZERO8. When your ZERO8 is
detected correctly, the screen shown
in Figure 3 appears.
Click on [Update] in the main window
to start the update.
You should now see a "Writing...
(??%)" message indicating the
ZERO8 is being updated. The pro-
cess lasts approximately 5 minutes.
The LCD will stop flashing now and
remain lit.
Power your ZERO8 off and discon-
nect the FireWire cable.
Turn your ZERO8 on and verify the
version as displayed on the startup
screen.
Note:
During this process, a dialog
box stating, "Sorry, Please
Retry" may appear. If this
happens, click [OK] to close
the dialog box, and then press
[Update] again to restart the
update.
1.
2.
3.
4.
5.
6.
7.
ZERO8 system update (Running the Updater)
ZERO8 System Updater Ver 1.5
Figure 3: Start-up
Figure 4: Your ZERO8 detected correctly
Figure 5: Update started
Figure 6: While updating
Figure 7: Update successfully completed
Do not power your ZERO8 off
at any time during this process
Other manuals for Digital Mixer ZERO8
3
Table of contents
Other Korg Synthesizer manuals
Korg
Korg ER-1mkII User manual
Korg
Korg PA1X User manual
Korg
Korg DSS-1 User manual
Korg
Korg EK-50 User manual
Korg
Korg M-500 User manual
Korg
Korg Kaossilator Dynamic Phrase Synthesizer Product information sheet
Korg
Korg MS-10 User manual
Korg
Korg X3 User manual
Korg
Korg 707 User manual
Korg
Korg TR User manual
Korg
Korg TRITON Le User manual
Korg
Korg EasyStart X50 Product information sheet
Korg
Korg Preset Synthesizer User manual
Korg
Korg Nu:Tekt NTS-1 digital kit User manual
Korg
Korg KingKORG User manual
Korg
Korg R3 User manual
Korg
Korg Wavedrum mini User manual
Korg
Korg microSTATION User manual
Korg
Korg Poly-800 User manual
Korg
Korg POLY-61 User manual
