Kontron JFLEX-DUALDVI User manual
JFLEX-DUALDVIUser’s Guide
Document Revision 0.1
PRELIMINARY
Kontron
JFLEX-DUALDVI User’s Guide
1
CONTENTS
1. USERINFORMATION...........................................................................................2
1.1 About This Manual........................................................................................2
1.2 Copyright Notice..........................................................................................2
1.3 Trademarks ................................................................................................2
1.4 Standards..................................................................................................3
1.5 Warranty ...................................................................................................3
1.6 Technical Support ........................................................................................4
2. INTRODUCTIONS...............................................................................................5
2.1 JFLEX-DUALDVI...........................................................................................5
3. SPECIFICATION.................................................................................................7
3.1 JFLEX-DUALDVI with Silicon Image SIL164 and Texas Instruments TFP410.....................7
3.2 Mechanical Specifications ..............................................................................7
3.2.1. Dimensions...........................................................................................7
3.3 Electrical Specifications.................................................................................8
3.3.1. Supply Voltage ......................................................................................8
3.3.2. Supply Voltage Ripple..............................................................................8
3.3.3. Supply Current.......................................................................................9
3.4 Environmental Specifications..........................................................................9
3.4.1. Temperature.........................................................................................9
3.4.2. Humidity..............................................................................................9
4. MODULEFUNCTIONS........................................................................................10
4.1 AC ’97 Sound Controller............................................................................... 10
Line-In Connector X2........................................................................................ 10
Line-Out Connector X1 ...................................................................................... 10
CD-ROM Input X8 ............................................................................................. 11
4.2 DVI (Digital Video Interface)......................................................................... 11
4.3 DVI Connector X3 Pinout on JFLEX-DUALDVI...................................................... 12
4.4 DVI Connector X4 Pinout on JFLEX-DUALDVI...................................................... 13
5. APPENDIXA:BLOCKDIAGRAM............................................................................14
6. APPENDIXB:CONNECTORLAYOUT.......................................................................15
6.1 Connector Locations................................................................................... 15
7. APPENDIXC:LITERATUREANDSTANDARDS ...........................................................16
7.1 Buses and General PC Architetcure.................................................................. 16
7.1.1. USB.................................................................................................. 16
7.1.2. AC ’97 ............................................................................................... 16
APPENDIX D: DOCUMENT-REVISIONHISTORY...............................................................17
Kontron
2JFLEX-DUALDVI User’s Guide
1. USER INFORMATION
1.1 About This Manual
This document provides information about products from Kontron Embedded Computers AG
and/or its subsidiaries. No warranty of suitability, purpose, or fitness is implied. While
every attempt has been made to ensure that the information in this document is accurate,
the information contained within is supplied “as-is” and is subject to change without
notice.
For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far
as patents or other rights of third parties are concerned.
1.2 Copyright Notice
Copyright © 2005 Kontron Embedded Computers AG.
All rights reserved. No part of this manual may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer language, in any
form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
without the express written permission of Kontron.
JUMPtec Industrielle Computertechnik AG and Kontron Embedded Computers AG merged in
July 2002. JUMPtec is now known as Kontron Embedded Modules GmbH. Products labeled
and sold under the Kontron Embedded Modules name (formerly JUMPtec) are now
considered Kontron products for all practical purposes, including warranty and support.
DIMM-PC®, PISA®, ETX Components SBC, JUMPtec®, and Kontron Embedded Modules are
registered trademarks of Kontron Embedded Modules GmbH©.
1.3 Trademarks
The following lists the trademarks of components used in this board.
†IBM,XT,AT,PS/2andPersonalSystem/2 aretrademarksofInternationalBusiness
MachinesCorp.
†MicrosoftisaregisteredtrademarkofMicrosoftCorp.
†IntelisaregisteredtrademarkofIntelCorp.
†Allotherproductsandtrademarksmentionedinthismanualaretrademarksoftheir
respectiveowners.
Kontron
JFLEX-DUALDVI User’s Guide
3
1.4 Standards
Kontron Embedded Modules is certified to ISO 9000 standards.
1.5 Warranty
This Kontron Embedded Modules product is warranted against defects in material and
workmanship for the warranty period from the date of shipment. During the warranty
period, Kontron Embedded Modules will at its discretion decide to repair or replace
defective products.
Within the warranty period, the repair of products is free of charge as long as warranty
conditions are observed.
The warranty does not apply to defects resulting from improper or inadequate maintenance
or handling by the buyer, unauthorized modification or misuse, operation outside of the
product’s environmental specifications or improper installation or maintenance.
Kontron Embedded Modules will not be responsible for any defects or damages to other
products not supplied by Kontron Embedded Modules that are caused by a faulty Kontron
Embedded Modules product.
Kontron
4JFLEX-DUALDVI User’s Guide
1.6 Technical Support
Technicians and engineers from Kontron Embedded Modules and/or its subsidiaries are
available for technical support. We are committed to making our product easy to use and
will help you use our products in your systems.
Before contacting Kontron Embedded Modules technical support, please consult our Web
site at http://www.kontron-em.com/index-en.html for the latest product documentation,
utilities, and drivers. If the information does not help solve the problem, contact us by
telephone.
Kontron EUROPE
Kontron Embedded Modules
Brunnwiesenstr. 16
94469 Deggendorf –Germany
Tel: +49 (0) 991-37024-0
Fax: +49 (0) 991-37024-109
Kontron AMERICA
14118 Stowe Dr
Poway, CA 92064-7147
Tel: (888)-294-4558
Fax: (858) 677-0898
Customer Service/Technical
Support:
(800) 480-0044 (US Only)
Email:
Website:
www.kontron.com
Kontron ASIA
HeiHu Office HanKang Office
4F, No. 415 Far East Science Park
Ti-Ding Blvd. Sec. 2 2nd Floor No. 2, Lane 50,
NeiHu District Nan Kang Road Section 3,
Nan Kang District
Taipei 114, Taiwan Taipei 115, Taiwan
Tel: +886-2-2799-2789 Tel: +886-2-2782-0201
Fax: +886-2-2799-7399 Fax: +886-2-2782-7486
Email: sales-asia@kontron.com.tw
Website: www.kontron.com.tw
Kontron
JFLEX-DUALDVI User’s Guide
5
2. INTRODUCTIONS
2.1 JFLEX-DUALDVI
The JFLEX-DUALDVIis an extension for Kontrons JRex 3,5’’ SBC family.
Following features are provided by theJFLEX-DUALDVI:
•One Realtek ALC650 sound controller compatible to IntelAudio Codec
´97 Rev. 2.2
Input connectors: Line, CD-ROM (internal)
Output connectors: Line
•DVI digital
•USB connector
TheJFLEX-DUALDVIissupportedbythefollowingBoard:
JRex–PM,a3.5”sizedSingleBoard ComputerwithIntelPentiumMprocessors.
http://emea.kontron.com/index.php?id=226&cat=58&productid=241
Kontron
6JFLEX-DUALDVI User’s Guide
The assembled JRex-PM and JFLEX-DUALDVI module looks like this and allows these connections:
Kontron
JFLEX-DUALDVI User’s Guide
7
3. SPECIFICATION
3.1 JFLEX-DUALDVIwith Silicon Image SIL164 and Texas
Instruments TFP410
-TheJFLEX-DUALDVIsupportsDVIresolutions from VGA toSXGA@60Hz
-ProgrammablebyUsingtheI2CSerialInterface
-ToactivatetheJFLEX-DUALDVIplease enable in the Phoenix Bios Setup:
->Advanced ->Display Control: EFP Only or CRT+EFP
3.2 Mechanical Specifications
3.2.1. Dimensions
†82.5mmx140.7mm
†Height(total)approx.15mm
Kontron
8JFLEX-DUALDVI User’s Guide
140,6
15,00
5,00 10,00
3.3 Electrical Specifications
3.3.1. Supply Voltage
†5VDC+/-5%
†3,3VDC+/-5%
3.3.2. SupplyVoltageRipple
†Maximum100mVpeaktopeak0–20MHz
This manual suits for next models
1
Table of contents
