Kontron EPCI-201 User manual

P/N : M8004_INST Page 1 of 1 V 1.0 November 2004

READ ME FIRST

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can cause damage to electronic devices, the following precautions should be

taken:

1. Keep the board in its anti-static package, until you are ready to install it.

2. Always touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong electrostatic,

electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it as well as the packing material for possible future shipment.

2. Remove the board from its anti-static wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage or missing items, notify Kontron

immediately.

When unpacking you will find:

1. One ePCI-201 SBC.

2. One CD-ROM containing drivers *

3. One heat sink.

4. One Quick Reference sheet.

5. Cables listed on the order.

6. One mezzanine with two USB connectors, one RCA connector and one video (DB15) connector.

Note:

For latest Technical Reference Manual, Quick Reference Sheet, drivers, BIOS and other

documentation, please consult our web site at: http://www.kontron.com or our FTP site at:

ftp://ftp.kontron.ca/Support

* Note that the Ethernet driver for the 82541ER available on the CD 4.1 is not working

properly. To download the new version, please visit www.kontron.com or

ftp.kontron.ca/support/

P/N : M8004_INST Page 2 of 2 V 1.0 November 2004

CPU and Heatsink Installation

Raise the Socket Actuation Lever up to 90º.

Locate the Pin 1 Notch.

Locate the Pin 1 Notch on the CPU.

Install the CPU onto Socket (match the pin 1 of CPU

with Pin 1 of Socket.

Lower the Socket Actuation Lever.

Remove the protective cover under the heatsink.

Install the CPU Heatsink onto the CPU and clip it to

the retention module.

Activate simultaneously the clips levers in order to

secure the heat sink.

Caution : You must apply pressure equally on both

side of the heatsink when you fasten the side

brackets.

Connect the CPU Fan cable to the CPU fan

connector (J21) located near the Memory Sockets.

IMPORTANT

1. Once the CPU is installed you must handle the board carefully and hold it on the

heatsink side.

2. The CPU Power cable must be installed on connector J22.

If not installed, the board will not start. This 4 wires cable comes from P4 ready power

supply or from the Backplane.

mPGA478B

Pin 1

Notch

Pin 1 Notch

mPGA478B

Table of contents

Other Kontron Computer Hardware manuals

Kontron

Kontron VX3030 User manual

Kontron

Kontron DIMM-PC/MD User manual

Kontron

Kontron MPC-pONE User manual

Kontron

Kontron ThinkIO-P User manual

Kontron

Kontron Mungo540 User manual

Kontron

Kontron KBox E-200 Series User manual

Kontron

Kontron MOPSlcdLX User manual

Kontron

Kontron 820951 ADD2-DVI-Dual-Internal User manual

Kontron

Kontron COMe Eval Carrier T7 User manual

Kontron

Kontron CP6012 User manual

Kontron

Kontron EBP-11A4B6 User manual

Kontron

Kontron AdvancedTCA AT8001 User manual

Kontron

Kontron CP3003-SA User manual

Kontron

Kontron MSM200X User manual

Kontron

Kontron MSP8020 Series User manual

Kontron

Kontron COMh-sdID User manual

Kontron

Kontron CP-ADAP-P47-PB (3U) User manual

Kontron

Kontron COMh-caRP User manual

Kontron

Kontron coolMonster/PM User manual

Kontron

Kontron ePanel-C3 User manual

Kontron

Kontron Kiss-Stor 0/5 User manual

Kontron

Kontron USB-16REL User manual

Kontron

Kontron PC/104-PCMCIA-1 User manual

Kontron

Kontron MOPS/386A User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Advantech

Advantech ASMB-935 Series user manual

Jupiter

Jupiter RAM PACK instructions

Kontron ePCI-201 User manual

Popular Computer Hardware manuals by other brands