Konsmetal WBNE User manual
2
INSTALLATION AND STARTING UP............................................................ 3
DEPOSIT STRONG SAFE FEATURES ........................................................... 4
DEPOSIT STRONG SAFE ELEMENTS LAYOUT: ....................................... 5
OPERATION ....................................................................................................... 6
OPENING THE ELECTRONIC DEPOSIT STRONG SAFE ............................................. 7
LOGGING IN ........................................................................................................ 7
DEPOSITING THE PACKAGES ................................................................................ 7
Package code scanning - optional ................................................................. 8
Entering the package code using the keypad ................................................. 8
Declaring the package amount (optional) ..................................................... 8
Drop-in .......................................................................................................... 8
DEPOSITS REMOVAL .......................................................................................... 10
OPENING THE DEPOSIT CABINET ........................................................................ 11
CLOSING THE DEPOSIT CABINET ......................................................................... 11
DEPOSIT STRONG SAFE PROGRAMMING AND CONFIGURATION . 12
ADMINISTRATOR MENU .................................................................................... 12
1. Changing the PIN code. .......................................................................... 12
2. User management .................................................................................... 14
3. Setting the time and the date ................................................................... 18
4. Setting the LAN network (Ethernet) parameters...................................... 19
5. Changing the user interface language..................................................... 22
6. Setting the deposit strong safe ID ............................................................ 22
7. Resetting the deposit strong safe settings ................................................ 23
REPLACING THE PAPER IN THE PRINTER .............................................................. 24
REMOVING THE PAPER SCRAPS FROM THE PRINTER. ............................................ 25
MAINTENANCE ............................................................................................... 25
MANUFACTURER ........................................................................................... 26
3
Directions for Use:
Be careful when closing and opening the door and the drum.
Open and close the drum using the handle.
Failure to comply with the above rules may result in an injury, in particular, your
fingers may get caught between the moving elements.
If there are any doubts on the functioning of the device, immediately contact the
service center.
The device has to be connected to the grid with the protective conductor.
The Electronic Deposit Strong Safe can be installed and started up only by an
Depending on the weight of the set the Deposit Strong Safe may require
anchoring to the ground by a metal anchor.
4
Electronic Deposit Strong Safe with a drum is used to deposit the money
in collective packaging (wallets, envelopes). Usually the deposit strong safe is
built into the outer wall of the bank and is an integral part of the safe.
The deposit strong safe can only be used by authorized persons who have an
electronic identification card.
The device design allows to modify some functions of the system in
order to adapt them to the requirements of the user. These modifications are
possible both on the software and hardware level.
This document describes the version of the device equipped with additional
features: printer, barcode scanner and camera.
Deposit Strong Safe characteristics:
Resistance to vandalism and devastation, as well as weather conditions,
Customer identification by card or code,
Drop-in confirmation system and protection against theft,
Real-time clock and recording of events,
Emergency power supply ensuring at least 12 hours of operation without the grid
power,
System programming and management from a computer connected locally or
remotely, via the computer network,
Possibility to cooperate with an external alarm system,
Possibility of installing additional sensors.
5
Deposit Strong Safe elements layout:
Fig. 1. Deposit Strong Safe view
Fig. 2. Deposit Strong Safe view after opening front door
Card reader
Deposit hole
Drum lever
Electronics cassette
Emergency opening
lock
6
Fig. 3. Electronics cassette
Operation
The daily use and programming of the deposit strong safe is done via 12 button
keypad.
Keys are used to enter data and navigate through the menu options.
Functions of the keys:
0-9 - Entering the values and selecting the menu options
Approval, save,
Cancel, return, delete.
changes.
Pressing the " the data
input, returning to the previous menu, canceling the changes or resignation.
Lock
Bar code scanner
Display
Printer
Keypad
Card reader
Camera
7
Opening the Electronic Deposit Strong Safe
Applies to devices equipped with shielding doors of the drop-in drum.
Place the card on the reader in order to open it (Fig. 1). The door will
automatically open (if the door does not open, press it lightly for a while).
If you need to re-use the card wait about 5 seconds.
Logging in
Insert the card into the reader (Fig. 3.) and then enter the PIN code.
Depending on the configuration of the deposit strong safe you can login by:
using the card and entering the PIN code;
using the card only, without the use of the PIN code;
entering the login and the PIN code on the keypad..
Depositing the packages
In order to make a deposit you have to open the deposit strong safe door and log
in.
Insert the package after a successful verification of the user.
In the case of a deposit strong safe that is not equipped with a barcode scanner
the deposit strong safe proceeds directly to the manual package code entry
procedure.
There are two ways of entering the package code: using a barcode scanner or
directly from the keypad. The selection of the mode is done by pressing the * and
#.
Pressing * means changing the mode to the manual package code entry.
The scanner turns on after pressing # (Fig. 2).
8
Package code scanning - optional
Bring the barcode (printed on the package) closer to the reader, at a distance of
not less than 20 cm, for a brief moment in such a way that the + symbol, displayed
by the scanner, was located near the center of the bar code. The barcode read-out
is signaled by a short beep.
Using the * key during scanning means canceling the deposit.
Entering the package code using the keypad
Using the numeric keys, enter max. 16 digit package code. Finish entering the
code by pressing #. * key allows to delete the last entered digit and after deleting
all digits it allows to cancel the drop-in action.
Declaring the package amount (optional)
The next step after entering the package code is entering the package value.
Depending on the configuration of rights, some users do not enter the package
value.
Using the numeric keys, enter max. 8 digit value of the package. Finish entering
the code by pressing #. * key allows to delete the last entered digit and after
deleting all digits it allows to cancel the drop-in action.
The value of the package is expressed in hundredth parts of a given currency
(for PLN enter value in grosze, for EUR in cents, etc.).
Drop-in
After entering the code and, optionally, the package value the deposit strong safe
drum
The drum is opened by moving the lever of the drum (Fig. 2) to the fully-opened
position.
9
Insert the envelope and close the drum by pulling the levers down until it stops.
Inserting more than one envelope at the same time will make the device registers
only one deposit.
Each correct drop-in (inserting the envelope to the deposit part) is signalled by a
message.
If you want to make another drop-in then press # and act in accordance to the
description presented in the above section.
Drop-ins finish after pressing the * key.
At the end of the drop-in procedure the deposit strong safe prints a confirmation
that contains the date and time and the code of the deposited package and then the
user is logged out.
After receiving the printout, remove the card and close the deposit strong safe
door. If the deposit strong safe door is not closed, then the device will beep until
the door is closed.
The deposit strong safe can also save the drop-
(optional).
10
Deposits removal
Fig. 3. Deposit cabinet view
Before opening the deposit cabinet you have to log in and then, by pressing button
2, select option 2. Clear the packages and confirm the selection by pressing #.
The deposit strong safe will print a list of deposited packages.
Pressing * instead of # will cancel the procedure of deposits removal.
Before starting the procedure, make sure that the paper is in the printer. Repeating
the procedure of printing the list of packages is not possible.
confirm your selection by pressing #. The drop box will be automatically locked
for 15 minutes - depositing new packages is not possible during that time. This
time is required to open and clear the deposit part of the device.
Remove the card and close the deposit strong safe door after you log out and take
the printout. If the deposit strong safe door is not closed the device will beep until
the door is closed.
locks
knob
Table of contents
Other Konsmetal Safe manuals
Popular Safe manuals by other brands
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe user guide
Hornady
Hornady SnapSafe Trunk Safe II owner's manual
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO instruction manual
Honeywell
Honeywell 5912 user guide
Phoenix
Phoenix FS1280F operating instructions
Phoenix
Phoenix SS0992K Instructions & Guarantee Registration
Technomax
Technomax Trony Series Instruction handbook
SPORTS AFIELD
SPORTS AFIELD INSTINCT BIOMETRIC Series instruction manual
RICHTER CZECH
RICHTER CZECH LA Instructions for use and installation
Olymp
Olymp GOsafe 110 operating instructions
Phoenix
Phoenix SS0100E Operating Instructions & Guarantee Registration
Clarke
Clarke Strong-Arm CS1000K Operation & maintenance instructions