KOLAR LAURA 60 User manual

Cooker hood

Instruction Manual

SANTA 60

LAURA 60

CUBIX 60

ERIKA 90

VICTORIA 90

◆PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATION◆

Dear customer：

Your new hood was manufactured in a state of the art facility

and has passed the strictest quality control procedures.

The rang hood fan extracts the kitchen vapours and passes them

through the grease filter. The grease filter absorbs the solid

particles in the cooking vapors, keeping the kitchen almost free

of grease.

This manual will provide you with information on how to

operate and care for your hood to gain the maximum benefit

from it.

For you to better use this product, please read the instructions

carefully before you use it, and keep it for latter reference!

Important information

1. This section contains safety instructions that will help you

avoid risk of injury and damage. All warranties will be void if

you do not follow these instructions.

2. This guide to installation and use is valid for several models.

Minor differences in details and fittings may emerge between

your appliance and the description provided.

3. The manufacturer strives for continuous improvement. For

this reason, the text and illustrations in this manual are subject to

change without notice.

4. Figures in this manual are schematic and may not exactly

match your product.

5.The rang hood is used on 220/240v, 50Hz.

Contents

A. Precautions -------------------------------------------------P4-5

B. Installation --------------------------------------------------P5-7

C. About the switch--------------------------------------------P7-9

D. Circuit diagram---------------------------------------------P9

E. Maintenance-------------------------------------------------P10-12

F. Trouble shooting--------------------------------------------P12-13

Precautions

1.To avoid accident, installation should be performed by

professionals.

2.Before installing and using the range hood, ensure the voltage and

frequency specified on the range hood are right.

3.To ensure safety and smooth installation, use supplied accessories

for installation, mounted on the walls with enough strength to

support the hood ,or the range hood may drop.

4.While boring or mounting screws on the walls for installing the

range hood on, be aware of the structure and materials of the wall

and keep away from the electric wires and water pipes, etc. in the

wall.

5.Use the original exhaust pipe supplied with the range hood.

6.The range hood shall not share the exhaust pipe with any other

facilities, such as heating pipeline, gas pipeline, water heater, etc.

7.When installing exhaust pipe, ensure its bent angle shall be ≥120°,

and it shall be not lower than the starting point while it runs outdoor.

8.The range hood shall have reliably grounded power plug, or else it

is forbidden to use.

9.Unplug the power supply in case the range hood lays idle for long

time.

10.If any electric part of the range is damaged, replace with new one

of the same specification.

11.This rang hood was designed for used by private person in their

homes, should not be used in special environment.

12.This hood is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning the use of the hood by a person responsible

for their safety.

13.Electrical products are dangerous to children. Keep children away

from the hood when it is operating and do not allow them to play

with the hood. The packaging materials will be dangerous for

children. Keep the packaging materials away from children.

14.Always unplug the hood before cleaning it or performing other

maintenance acts.

Installation

1.In order to ensure the effect of suction and exhaust of the

appliance, it should be

installation should avoid Windows and doors around too much.

And the center of the range hood is 650-750mm away from the

upper surface of the cooker (See Fig. 1).

2.The perfect position should take the safe situation of the gas stove

or other cookers into consideration.

3.The horizon distance from the air outlet to the body should keep

more than 1.5m，and the turn radius as long as possible.

4.After the mounting height and position are fixed, fix the

suspension loop at appropriate position. Note: the top of the

enclosing board is the highest mounting point for the range hood (as

in Fig. 2).

5.Fix the exhaust pipe on the range hood, bind with sealing tape(as

in Fig. 3).

6.Use screws to fix the enclosing boards on the range hood. (as in

Fig. 4)

7.Lift up the range hood, fix it with the suspension loop. (as in Fig.

5). Note: Ensure the range hood is properly fixed before loosening

grip.

8.Inspection the body levelness of the range hood in case the grease

cup inner learn to one side. (as in Fig. 6)

Fig.1 Fig.2

Fig.3

Fig.4 Fig.5

Fig.6

About the switches and circuit diagram

I. About the use of electronic switches (as in Figure 7)

Fig.7

2. On/Off: Pressing the “On/Off” button once, the power indicator

light goes on, start-up music sound, pressing once again, every

function goes off. During the motor running, press the “On/Off”

button once to enter the state of delay within two minutes. After the

two minutes, power off

Pressing “On/Off” button once, the power indicator light and

backlight goes on, then press “Fast” button once, the motor runs at

fast speed, press “Fast” button once again, the motor stop running.

Pressing “On/Off” button once, the power indicator light and

backlight goes on, then press “Medium” button once, the motor runs

at medium speed, press “Medium” button once again, the motor stop

running.

Pressing “On/Off” button once, the power indicator light and

backlight goes on, then press “Slow” button once, the motor runs at

slow speed, press “Slow” button once again, the motor stop running.

Time: Pressing “Time” button once, hour system start flashing every

1 second for 8 seconds. Press “Time” button to increase time and

“Slow” button to decrease time during flashing. Pressing “Time”

second time to confirm the hour system and minute system flash.

Pressing “Medium” button to increase time and “Slow” button to

decrease time and “Time” once more to confirm the minute system

during the 8 seconds.

Light: Pressing “Light”button once，the light goes on ,press once

more ,the light goes off.( “Light” function works independently and

do not subject to “On/Off” control .)

II.About the use of push button(as in Fig.8)

1.Press “P”, the motor will be off.

2.Press the button to “low”, “middle” and

“high”,the motor will be turned on at “ low”,

“middle” and “ high” speed respectively.

3.Press “light”, the light will be on. Press it

again,the light will be off.

III .About the use of push button(as in Fig.9)

1.Power on,hum once, then all indicator light on within one

second,LCD screen shows"12:00" and starts the countdown.It will

be on state of standby after the background indicator lights on

within ten seconds.

2.Press" timing" button last three seconds,hum once,the LCD screen

show"12:"flashing,touch the button "speed" to increase the hour

system,touch the button"timing" once,the LCD screen

show":00"flashing,touch the button"light"to increase the minute

system.It will be save the settings within ten seconds not operation

any more or Second touch timing key to exit the state of setting.

3.Press the "Speed" key once ,the motor runs in high speed; Press

twice, the motor runs in medium speed; Press three times ,the motor

runs in slow speed.

4.When the motor runs: touch your "timing" key to set the shutdown

state.

5.Touch the "light" key once ,the lights go on ;Touch twice ,the light

go off.

6.The motor works condition to touch the "on/off" key once, 60

seconds delay shutdown, the LCD shows "1:00" and start the

countdown at once, "on/off "indicator lights flashing, it will be the

delay shutdown state, after the end of the countdown motor stopped

working , in the process of delay shutdown , touch the keys again its

motor will immediately.

7.Touch the "Auto" key once,the LCD shows "Auto" after one

minute,the smoke preheating successfully start automatic function.

8.The "Remote" key is corresponding to the panel buttons function.

Circuit diagram(as in Fig.9)

N L

BLUE

YELLOW/GREEN

BROWN

LED

WHITE

YELLOW

BLUE

ORANGE

BLACK

LED FEELING SCREEN BUTTON

RED

CONTROL PANEL

BLACK

RED

Fig.9

Maintenance

To let the range hood have the best performance and longest life,

frequent maintenance is necessary.

Note:

1. Unplug the power cable before doing maintenance, and press the

“On/ off”button to ensure it is off.

2. Wear protective gloves in maintenance.

Cleaning the metal grease filters

1.In normal operation(1 to 2 hours daily),the metal grease filters

must be cleaned every 8 to 10 weeks.

2.Dip metal grease filters into clear water about 40-50℃, add

cleaning agent and soak for 2-3 minutes, wash with soft-haired

brush, avoid damaging the filtering screen (aluminum screen).

3.May be rinsed in dishwasher. Add cleaning agent, bring the

temperature to about 60℃.

Note: Filtering is all metal. Cleaning agent corrosive to metals shall

not be used in cleaning. If cleaning is not carried out in accordance

with the instructions, the accumulated grease could, over time,

become a fire risk.

Replace the active carbon unit

Take down the active carbon unit in the direction of the arrow and

replace new one. (as in Fig. 10)Under normal conditions (work one

to two hours every day, replace with new one every six month).Have

been used active carbon should be discarded together with living

garbage.

Fig.10

This manual suits for next models

Table of contents

Other KOLAR Ventilation Hood manuals

KOLAR

KOLAR PRIME User manual

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual