Kohler ENGLEFIELD MILANO FS User manual

1378872-A02-A 5/03/2019

INSTALLATION

INSTRUCTIONS

BATHS

Engleeld

MILANO Solid Surface FS Baths

Englefield has a history of

making superb baths and

their popularity is testament to

their quality and affordability.

It’s the details that Englefield

cares about - from pioneering

the latest technology, to

innovative design, it’s all to

make your bathing

experience the very best it

can be.

ROUGH IN DIMENSIONS

NOTE: Check the rough-in and room dimensions to provide adequate available

space for the bath unit. Arrange the location of the drain in advance and ensure

that the flooring is prepared to allow space for the drain. Ensure that the floor is level.

800

1700

540

1146 542

WARNING: The Milano Solid Surface Freestanding bath is very heavy. Please make

sure that the floor is structurally sound and provides adequate support for the bath,

water and the user. A mechanical lifting device is advised when manoeuvring the

bath.

Page 1

Before installing the bath please read these instructions carefully to familiarise yourself with

the required tools, materials and installation sequences. The installation documents included

assume that walls are plumb and floors are level.

In addition to proper installation, read all safety instructions and refer to the Homeowner’s

Guide for important care and cleaning information. Ensure that all local building and plumbing

codes are observed. These instructions contain important care, cleaning and warranty

information. Please leave these instructions for the consumer after installation.

IMPORTANT: Before installation please remove the protective packaging from the bath and

inpsect the Milano Solid Surface FS bath and report any damage to us. Installers are

responsible for damage that occurs during installation and no claims for damages will be

accepted once the bath has been installed.

INSTALLATION INSTRUCTIONSMILANO Solid Surface FS Baths

BEFORE YOU BEGIN

TOOLS AND MATERIALS REQUIRED

ENGLEFIELD

CONCRETE SLAB FLOOR PREPARATION - IF APPLICABLE

Note: Instructions, drawings, and diagrams contained in this manual present information available at the

time of printing. Although every attempt has been made to keep them up-to-date, Englefield reserves the

right to implement product changes without further notice.

Timber blocks

1) Mark out the drain position and mark out the region in the floor for the drain.

2) Make floor and plumbing preparations as necessary to make space for the drain. It is

recommended to prepare a waterproof layer for the sub-floor.

Minimum

120mm

Minimum

100mm

Maximum

520mm

Page 2

INSTALLATION INSTRUCTIONS

ENGLEFIELD

MILANO Solid Surface FS Baths

1) Install the drain in the sub-floor & position it accordingly to allow for the waste to be

connected. The self-sealing trap with flexible waste pipe (80144A-NA) is recommended,

where there is no underfloor access. Please adhere to the relevant sections of AS/NZS

3500 plumbing standard.

INSTALLATION

3) Connect the waste outlet to the drain. Check to see that all connections are firmly

tightened.

4) Close-off the waste and fill the bath with water, allow the water to stand for at least 30

minutes, check for leaks. Attend to waste and pipe connections as necessary.

2) Raise the Free Standing bath off the floor by propping it up onto timber blocks

positioned at either end of the bath. Install and connect the waste outlet. Apply silicone

sealant around the waste connections to ensure a water-tight fit.

Page 3

INSTALLATION INSTRUCTIONS

ENGLEFIELD

CONTACT AND WARRANTY INFORMATION

NEW ZEALAND

KOHLER NZ LTD

Free Ph: 0800 100 382

Free Fax: 0800 664 488

www.engleﬁeld.co.nz

AUSTRALIA

KOHLER CO.

Free Ph: 1 800 ENGLEFIELD

(1 800 364 533)

www.engleﬁeld.com

1) Please refer to the Homeowner’s Guide for cleaning instructions.

2) Because baths are often placed on cold floors, and Solid surface baths are sensitive

to thermal shock, it is highly recommende in cold periods, to run in lukewarm water for

a couple of minutes before running hot water. It is recommended the hot water be no

more than 60 C.

For warranty information, please visit our website.

CLEANING AND MAINTENANCE INSTRUCTIONS

Installation complete.

MILANO Solid Surface FS Baths

5) Carefully slide the timber blocks out and gently lower the bath into place. Apply an

appropriate silicone sealant, ensuring a watertight seal between the bath and adjacent

surfaces.

3) Light scratches can be removed, if necessary, with very fine sandpaper. It is

recommended to start with 1200 grade followed by 2500 grade. Finally use car cutting

compound to polish the area to recover the gloss surface.

Other Kohler Bathtub manuals

Kohler

Kohler Sunward BubbleMassage K-1162-G User guide

Kohler

Kohler 1297608-2 User manual

Kohler

Kohler Sterling 7112 Series Assembly instructions

Kohler

Kohler K-513 Assembly instructions

Kohler

Kohler K-1969-G Quick start guide

Kohler

Kohler Memoirs K-723 Quick start guide

Kohler

Kohler KARAT K-34019X Assembly instructions

Kohler

Kohler K-1158 Quick start guide

Kohler

Kohler K-1257-LA Quick start guide

Kohler

Kohler K-1148 Quick start guide

Kohler

Kohler K-1259 Quick start guide

Kohler

Kohler K-1123-LA-0 User manual

Kohler

Kohler K-1226-CD Quick start guide

Kohler

Kohler K-702-H2 Assembly instructions

Kohler

Kohler K-1834 Quick start guide

Kohler

Kohler Memoirs K-723 User manual

Kohler

Kohler Precedence K-1353-AA User manual

Kohler

Kohler K-824 Quick start guide

Kohler

Kohler Jacob Delafon E6D034-00 User manual

Kohler

Kohler Sterling Unwind 96129-0 User manual

Kohler

Kohler K-1167 User manual

Kohler

Kohler K-1822-VB User manual

Kohler

Kohler K-1168-VB Quick start guide

Kohler

Kohler K-1162-CB Quick start guide

Popular Bathtub manuals by other brands

Agua

Agua BARTOLI-66 quick start guide

PAA

PAA PRELUDE owner's manual

BETTE

BETTE SILHOUETTE installation guide

American Standard

American Standard Whirlpool/Bathing Pool 2748.XXXW installation instructions

Oliveri

Oliveri Naples installation instructions

Lyons

Lyons Elite ETLxx663219 Series manual

Woodbridge

Woodbridge BJ500 Installation and care guide

Whirlpool

Whirlpool Ariel ARL-702 installation manual

TEIKO

TEIKO EXCELLENT DUO user manual

American Standard

American Standard Colony 5-1/2' x 32" Specification sheet

American Standard

American Standard 3052OD.X0X Installation instructions and owner's manual

agape

agape MARSIGLIA AVAS1075 Assembly instructions

Kallista

Kallista P50045-G5 Homeowner's guide

Ariel

Ariel AM Series user manual

Agua

Agua BAHLI-60 quick start guide

DURAVIT

DURAVIT XViu 700443 Mounting instructions

American Standard

American Standard Colony 2740 Series installation instructions

Rapsel

Rapsel OFURO Fixing instructions